I got 2 questions:

Do RBV7's come with launchers for each bey?
and
Do those Rubber Launcher things you attach onto the handlebars of the BeyLauncher protect the handlebar from being broken?

I got 2 questions:

Do RBV7's come with launchers for each bey?
and
Do those Rubber Launcher things you attach onto the handlebars of the BeyLauncher protect the handlebar from being broken?

Boosters never come with launchers. Random Booster Version 7. Booster. Boosters. Never come with launchers.

The Rubber Launcher things are there to help absorb the shock of pulling the Beylauncher, and to make it more comfortable to hold. If you also have the Beylauncher Suspension, it basically does the same thing, except it also increases power slightly.

---

l Buying Thread l

I got 2 questions:

Do RBV7's come with launchers for each bey?
and
Do those Rubber Launcher things you attach onto the handlebars of the BeyLauncher protect the handlebar from being broken?

Boosters never come with launchers. Random Booster Version 7. Booster. Boosters. Never come with launchers.

The Rubber Launcher things are there to help absorb the shock of pulling the Beylauncher, and to make it more comfortable to hold. If you also have the Beylauncher Suspension, it basically does the same thing, except it also increases power slightly.

The Launcher Suspension does not increase power, and there was no need to be so obnoxious to someone asking a question in the "Ask a Question" thread.

---

Some manner of Octopus.

Beylauncher Suspensions kinda reduce the power, or at least do so indirectly by making the launch more awkward. They are certainly not a worthwhile purchase.

And the Rubber things are there to reduce pain and/or damage from it flicking back as it retracts. They're not a bad buy.

Does LF damage the attack stadium due to jagged ends on the tip?

It sucks horribly, but no, it is not damaging to stadiums. Just to any hope of actually winning anything ever.

playtoomuch- Whoops! My bad! I thought you were referring to that Perseus Attack and Stamina Mold Variants.
Well, if you read the first page of the thread, it reads that the first mold is pretty much old, and its production has been discontinued... So, you probably have Mold 2.

Not true at all. Mold One is still the mold produced by Takara Tomy in all releases, whereas Sonokong ONLY have discontinued Mold One.

As for hasbro, I doubt it's actually a mold two, playtoomuch. Do you have some scales that you could weight it on at all? Even if they're only able to measure to the 1g, there's a pretty severe difference in weight IIRC.

There's also a mold 3 in some RBV7's, that has most of the smoothness of mold two (slightly less, mold two is almost a perfect circle on the outside of it's lower edge), but a weight on par with mold one.

That said I doubt hasbro would have made one mold and then swapped to another, they are usually pretty consistent from what I recall, seeing as they learn from the difficulties Takara Tomy have post-release, during the large time period before Hasbro themselves release a part.

---

th!nkBlargh|H-Code Product List

I don't see how that was obnoxious. It may have been a little bit blunt but I've seen far worse.

I got 2 questions:

Do RBV7's come with launchers for each bey?
and
Do those Rubber Launcher things you attach onto the handlebars of the BeyLauncher protect the handlebar from being broken?

just to clear every thing up
boosters imply that they only come with the beyblade and the tool for the beyblade.

launcher rubbers increase power but do not stop breakage
suspensions stop breakage

---

thanks to izuma inzori for the Incredible Sig! My youtube

I don't see how that was obnoxious. It may have been a little bit blunt but I've seen far worse.

It was very clearly an unnecessarily obnoxious tone, almost mocking, in fact - and most definitely unwarranted by someone about to post incorrect information.

I got 2 questions:

Do RBV7's come with launchers for each bey?
and
Do those Rubber Launcher things you attach onto the handlebars of the BeyLauncher protect the handlebar from being broken?

just to clear every thing up
boosters imply that they only come with the beyblade and the tool for the beyblade.

launcher rubbers increase power but do not stop breakage
suspensions stop breakage

Rubbers do not increase power, either. They DO stop breakage, and they do greatly reduce the pain inflicted on you when you launch hard. Suspensions stop breakage better than Rubbers, but also slow the cord down, which can have a marked negative impact on launch force until you learn to compensate.

I'm not sure where this trend of posting information people aren't certain of came from, but it needs to go the way of acid washed jeans.

---

Some manner of Octopus.

Ah, I was wondering if it had ever been confirmed which Gravity mold Hasbro made.

I really wish I had a scale, and I only have a SonoKong Gravity to compare, but according to Yamislayer's photographs, Hasbro's Gravity is the first mold. It is definitely unlike SonoKong's, which usually is mold two from what I have gotten, and Hasbro's definitely has a third line in the middle of the two, so it is not exactly like ♥'s third mold.

Rubbers do not increase power, either. They DO stop breakage, and they do greatly reduce the pain inflicted on you when you launch hard. Suspensions stop breakage better than Rubbers, but also slow the cord down, which can have a marked negative impact on launch force until you learn to compensate.

I'm not sure where this trend of posting information people aren't certain of came from, but it needs to go the way of acid washed jeans.

well what I posted is what I have been told and if you are truly that confident in your statement that I have been misinformed and TBH I was pretty confident in my statement my self. I do apologize but yeah thats what I was told and I havn't been wrong in one of my answers before!

---

thanks to izuma inzori for the Incredible Sig! My youtube

well what I posted is what I have been told and if you are truly that confident in your statement that I have been misinformed and TBH I was pretty confident in my statement my self. I do apologize but yeah thats what I was told and I havn't been wrong in one of my answers before!

I have Launcher Rubbers and have compared launch times with and without them - they average within ten seconds of eachother.

---

Some manner of Octopus.

I have Launcher Rubbers and have compared launch times with and without them - they average within ten seconds of eachother.

but I can certainly say that they don't stop breakage I mean I started using a mint beylauncher with a launcher Rubber and gradually it started cracking both items were real.

---

thanks to izuma inzori for the Incredible Sig! My youtube

They greatly prolong the inevitable breakage. Suspensions do, too. Neither of them makes it an impossibility, because the design of Beylauncher handles is just flawed on a fundamental design level.

---

Some manner of Octopus.

@th!nk i have no scale to compare/weight and it's looks exactly like mold 2. alot of paint came off the see the MW more clearly. does you or anyone have a hasbro gravity to see?

No one else who has one has reported anything other than mold 1.

---

th!nkBlargh|H-Code Product List

@th!nk i have no scale to compare/weight and it's looks exactly like mold 2. alot of paint came off the see the MW more clearly. does you or anyone have a hasbro gravity to see?

Hm, look at my detailed post just a few posts above, on this page ...

I've just recently got a brand new R2F. Should I replace my RF in my MF-H Lightning LDrago BD145RF combo with the R2F, or would adding R2F be somewhat self-destructive because it's new?

well what I posted is what I have been told and if you are truly that confident in your statement that I have been misinformed and TBH I was pretty confident in my statement my self. I do apologize but yeah thats what I was told and I havn't been wrong in one of my answers before!

There is a world of difference between knowing something and repeating what you have been told or have heard. The first is generally a conclusion based on primary source investigation and the other is just a rumor.

When you don't know an answer the best thing to do is not comment, and the second best thing would be to put forward the rumor you have heard as a follow-up question that also needs to be answered.

I think that goes in Build me a combo 2

---

thanks to izuma inzori for the Incredible Sig! My youtube

It's borderline, and questions like that end up being bounced between threads until someone answers them anyways.

Kaji, I'd suggest trying it out, and if it's too difficult to control then change back.

---

th!nkBlargh|H-Code Product List

There is a world of difference between knowing something and repeating what you have been told or have heard. The first is generally a conclusion based on primary source investigation and the other is just a rumor.

When you don't know an answer the best thing to do is not comment, and the second best thing would be to put forward the rumor you have heard as a follow-up question that also needs to be answered.

there is also the situation where the person thinks he is right but isn't. and I was in that position.So yes I was misinformed.

---

thanks to izuma inzori for the Incredible Sig! My youtube

I was watching http://www.youtube.com/watch?v=CKcfsmYRRHU by Akiras Daddy and I was wondering because he is translating the text of the box for Fang Leone W105R2F Burning Claw ver. and at about 33 seconds in the text states that the wheel is Attack specific Facing Fangs Leone. Are the molds the same between the 2 different fangs?

---

Credit for the awesome signature and avatar goes to CRUelty. Thanks again.

As far as I am aware, the Fang Leone W2D and Fang Leone W105R2F are identical MWs.

---

Some manner of Octopus.

They are identical. It is just an unclear translation, what it means is that the combo is specialised for attack (as the normal release is classed as a defense type iirc)

---

th!nkBlargh|H-Code Product List

That seems like such an awkward translation, but there is nothing even implying that there would be two molds.

Thank you that was what I thought but just wanted to know.

---

Credit for the awesome signature and avatar goes to CRUelty. Thanks again.