I recently acquired a used Master Diabolos Generate, and while I'm mostly done with "restoring" it, the Generate driver seems to have an issue. The tabs on the sides are very tight, requiring quite a bit of force to pull out manually, let alone centrifugally, so it's kind of stuck in its "stamina mode." I've already hit it a couple of times with WD-40 in both of the tabs' slots AND the tip, and it seems to have only barely improved, if that. Does anybody know how I can best troubleshoot this?

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

I recently acquired a used Master Diabolos Generate, and while I'm mostly done with "restoring" it, the Generate driver seems to have an issue. The tabs on the sides are very tight, requiring quite a bit of force to pull out manually, let alone centrifugally, so it's kind of stuck in its "stamina mode." I've already hit it a couple of times with WD-40 in both of the tabs' slots AND the tip, and it seems to have only barely improved, if that. Does anybody know how I can best troubleshoot this?

I have interacted with generate and the tabs do require a lot more force than others such as
f : s and reboot. It still should switch though, as long as it's spinning fast enough. Are you using the l/r string launcher that came with master diablos generate?

---

Sup Turtle
Leader of the Spryzenlightnings
I make beyblade recolors!  Check out my thread if you want one (or a few) done!
spoiler (click to view)

I recently acquired a used Master Diabolos Generate, and while I'm mostly done with "restoring" it, the Generate driver seems to have an issue. The tabs on the sides are very tight, requiring quite a bit of force to pull out manually, let alone centrifugally, so it's kind of stuck in its "stamina mode." I've already hit it a couple of times with WD-40 in both of the tabs' slots AND the tip, and it seems to have only barely improved, if that. Does anybody know how I can best troubleshoot this?

And I am having the problem of it being stuck in attack mode so it's a Infinite Staller!

---

Join My Team Galaxy Hamsters

[img][/img]

I recently acquired a used Master Diabolos Generate, and while I'm mostly done with "restoring" it, the Generate driver seems to have an issue. The tabs on the sides are very tight, requiring quite a bit of force to pull out manually, let alone centrifugally, so it's kind of stuck in its "stamina mode." I've already hit it a couple of times with WD-40 in both of the tabs' slots AND the tip, and it seems to have only barely improved, if that. Does anybody know how I can best troubleshoot this?

And I am having the problem of it being stuck in attack mode so it's a Infinite Staller!

Well that might not be a bad thing

---

Sup Turtle
Leader of the Spryzenlightnings
I make beyblade recolors!  Check out my thread if you want one (or a few) done!
spoiler (click to view)

And I am having the problem of it being stuck in attack mode so it's a Infinite Staller!

Well that might not be a bad thing

I guess so

---

Join My Team Galaxy Hamsters

[img][/img]

I have interacted with generate and the tabs do require a lot more force than others such as
f : s and reboot.  It still should switch though, as long as it's spinning fast enough.  Are you using the l/r string launcher that came with master diablos generate?

I got this one used, partly so I wouldn't have to pay all the extra ca$h for the launcher to be in there. I've had the blue version for a while now, and yes, the tabs are definitely stiffer than most, but they still extend and retract smoothly. This one does not

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

I have interacted with generate and the tabs do require a lot more force than others such as
f : s and reboot.  It still should switch though, as long as it's spinning fast enough.  Are you using the l/r string launcher that came with master diablos generate?

I got this one used, partly so I wouldn't have to pay all the extra ca$h for the launcher to be in there. I've had the blue version for a while now, and yes, the tabs are definitely stiffer than most, but they still extend and retract smoothly. This one does not

Hm, that's intresting. Anything in the tip itself? I'm running out of ideas.

---

Sup Turtle
Leader of the Spryzenlightnings
I make beyblade recolors!  Check out my thread if you want one (or a few) done!
spoiler (click to view)

Hm, that's intresting.  Anything in the tip itself?  I'm running out of ideas.

Nothing that I can detect

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

Hm, that's intresting.  Anything in the tip itself?  I'm running out of ideas.

Nothing that I can detect

Um, picture?

---

Sup Turtle
Leader of the Spryzenlightnings
I make beyblade recolors!  Check out my thread if you want one (or a few) done!
spoiler (click to view)

The tabs on my Generate are hard to pull out as well, but it works fine in battle.

At this point, your best bet is probably to post some pictures of the full combo (Master Diabolos + Generate)

I traded my master Diabolos generate to him. I think it's the mold of master Diabolos

---

Creator/owner of beyblade burst apocalypse.
Maiden will awaken and destroy genesis once more!
i have returned

My dimension driver won't switch back to defense mode. It's stuck on attack.

---

Hi

I have interacted with generate and the tabs do require a lot more force than others such as
f : s and reboot.  It still should switch though, as long as it's spinning fast enough.  Are you using the l/r string launcher that came with master diablos generate?

I got this one used, partly so I wouldn't have to pay all the extra ca$h for the launcher to be in there. I've had the blue version for a while now, and yes, the tabs are definitely stiffer than most, but they still extend and retract smoothly. This one does not

are you launching it hard (not that much, but a medium amount of strenght) because if you launch it weak, is instantly going to stamina mode, the string launcher problem is that you pull it weaker than usual so you dont break it, that happens to me all the time when I use a string launcher. try launching it harder

---

Nothing that I can detect

Um, picture?

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

Um, picture?

WAIT IT DOESNT EVEN HAVE THE TABS or am i blind

WAIT IT DOESNT EVEN HAVE THE TABS or am i blind

They're there, Generate's tabs are just just a lot more blended in than things like Reboot and Tower

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

WAIT IT DOESNT EVEN HAVE THE TABS or am i blind

They're there, Generate's tabs are just just a lot more blended in than things like Reboot and Tower

The tabs for some reason are deeper inside the driver than normal, that is probably why, they cant go out enough for attack mode

---

The tabs for some reason are deeper inside the driver than normal, that is probably why, they cant go out enough for attack mode

They aren't though, here's a picture of it next to my blue version, which works perfectly fine itself

---

I've also now noticed that if I push in the tips on both with my fingernail, the blue Generate has way more give than the red one does

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

The tabs for some reason are deeper inside the driver than normal, that is probably why, they cant go out enough for attack mode

They aren't though, here's a picture of it next to my blue version, which works perfectly fine itself

---

I've also now noticed that if I push in the tips on both with my fingernail, the blue Generate has way more give than the red one does

Now that is bad,maybe there is something broken, you said the diabolos was used, Diabolos is a A-S tier bey, I think he was selling it because the driver was broken
But I was not the one who sold it so IDK

---

They aren't though, here's a picture of it next to my blue version, which works perfectly fine itself

---

I've also now noticed that if I push in the tips on both with my fingernail, the blue Generate has way more give than the red one does

Now that is bad,maybe there is something broken, you said the diabolos was used, Diabolos is a A-S tier bey, I think he was selling it because the driver was broken
But I was not the one who sold it so IDK

I actually had no problems with the generate before i traded it to him. It's a mold difference I think.

---

Creator/owner of beyblade burst apocalypse.
Maiden will awaken and destroy genesis once more!
i have returned

Now that is bad,maybe there is something broken, you said the diabolos was used, Diabolos is a A-S tier bey, I think he was selling it because the driver was broken
But I was not the one who sold it so IDK

I actually had no problems with the generate before i traded it to him. It's a mold difference I think.

Yeah, maybe, maybe it broke while in delivery, or its because of the cold, there are a lot of possibilities

---

I actually had no problems with the generate before i traded it to him. It's a mold difference I think.

Yeah, maybe, maybe it broke while in delivery, or its because of the cold, there are a lot of possibilities

Sorry if the generate driver is broken. Well maiden broke too so. I think we can call it even.

---

Creator/owner of beyblade burst apocalypse.
Maiden will awaken and destroy genesis once more!
i have returned

Yeah, maybe, maybe it broke while in delivery, or its because of the cold, there are a lot of possibilities

Sorry if the generate driver is broken. Well maiden broke too so. I think we can call it even.

What do you mean even?

---

Sup Turtle
Leader of the Spryzenlightnings
I make beyblade recolors!  Check out my thread if you want one (or a few) done!
spoiler (click to view)

Sorry if the generate driver is broken. Well maiden broke too so. I think we can call it even.

What do you mean even?

both of things broke lol. The driver can be fixed but maiden can't.

---

Creator/owner of beyblade burst apocalypse.
Maiden will awaken and destroy genesis once more!
i have returned

What do you mean even?

both of things broke lol. The driver can be fixed but maiden can't.

Did roscoepcoleslaw make maiden?

---

Sup Turtle
Leader of the Spryzenlightnings
I make beyblade recolors!  Check out my thread if you want one (or a few) done!
spoiler (click to view)