World Beyblade Organization by Fighting Spirits Inc. Off-Topic Forums Your Creations

[3D Printing]  GreenK9148's 3D printed Beyblade designs. (details on commissions in FIRST POST!)

Dec. 02, 2020  5:28 PM
 
(Dec. 02, 2020  5:11 PM)GreenK9148 Wrote:
(Dec. 02, 2020  2:25 AM)6Jupiter5 Wrote: Look at my pfp, it tells the full story.
GreenK9148 the ridges have an awakening. They break ever so slightly and increase defensive powers

Uh, yeah I totally meant that as a gimmick

Sure.
Dec. 02, 2020  5:34 PM
 
(Dec. 02, 2020  5:28 PM)Master_chanter0 Wrote:
(Dec. 02, 2020  5:11 PM)GreenK9148 Wrote: Uh, yeah I totally meant that as a gimmick

Sure.

Me:*sweats even harder*
Dec. 04, 2020  4:59 PM
 
Since the success of basalt horogium/twisted tempo. I’m announcing that I will be starting project: Phantom Orion. This will be a sparking layer system and will be the first of my designs to have a gimmick. Like the MFB version, you can flip the metal ring upside down.
Dec. 04, 2020  5:07 PM
 
(Dec. 04, 2020  4:59 PM)GreenK9148 Wrote: Since the success of basalt horogium/twisted tempo. I’m announcing that I will be starting project: Phantom Orion. This will be a sparking layer system and will be the first of my designs to have a gimmick. Like the MFB version, you can flip the metal ring upside down.

Ooh, I'm looking forward to this.
Dec. 04, 2020  10:38 PM
 
(Dec. 04, 2020  5:07 PM)Master_chanter0 Wrote:
(Dec. 04, 2020  4:59 PM)GreenK9148 Wrote: Since the success of basalt horogium/twisted tempo. I’m announcing that I will be starting project: Phantom Orion. This will be a sparking layer system and will be the first of my designs to have a gimmick. Like the MFB version, you can flip the metal ring upside down.

Ooh, I'm looking forward to this.

Thanks, once I’m done with the prototype, can you print it out so it fits?
Dec. 05, 2020  12:13 AM
 
(Dec. 04, 2020  10:38 PM)GreenK9148 Wrote:
(Dec. 04, 2020  5:07 PM)Master_chanter0 Wrote: Ooh, I'm looking forward to this.

Thanks, once I’m done with the prototype, can you print it out so it fits?

Sure I will. Just there is no hurry, I'm not opening the 3D printer until like 6 days from now.
Dec. 05, 2020  12:49 AM
 
(Dec. 05, 2020  12:13 AM)Master_chanter0 Wrote:
(Dec. 04, 2020  10:38 PM)GreenK9148 Wrote: Thanks, once I’m done with the prototype, can you print it out so it fits?

Sure I will.  Just there is no hurry, I'm not opening the 3D printer until like 6 days from now.

Ok np, take as much time needed.
Dec. 08, 2020  9:20 PM
 
(Dec. 05, 2020  12:49 AM)GreenK9148 Wrote:
(Dec. 05, 2020  12:13 AM)Master_chanter0 Wrote: Sure I will.  Just there is no hurry, I'm not opening the 3D printer until like 6 days from now.

Ok np, take as much time needed.

Can I get a progress update because not too long now only a day or two.
Dec. 09, 2020  12:38 AM
 
(Dec. 08, 2020  9:20 PM)Master_chanter0 Wrote:
(Dec. 05, 2020  12:49 AM)GreenK9148 Wrote: Ok np, take as much time needed.

Can I get a progress update because not too long now only a day or two.

I have the prototype ready:https://www.tinkercad.com/things/5K2YCip...rion-proto

Also, in addition to phantom Orion, I will be making another 4D metal fight beyblade (burst remake), I was originally going to make it for myself. But, I will put up a poll soon, if anyone guesses the bey correctly, they can see and download the file. Otherwise I might make it available to non-winners if they pay a fee of 1 USD.
Dec. 09, 2020  1:14 AM
 
(Dec. 09, 2020  12:38 AM)GreenK9148 Wrote:
(Dec. 08, 2020  9:20 PM)Master_chanter0 Wrote: Can I get a progress update because not too long now only a day or two.

I have the prototype ready:https://www.tinkercad.com/things/5K2YCip...rion-proto

Also, in addition to phantom Orion, I will be making another 4D metal fight beyblade (burst remake), I was originally going to make it for myself. But, I will put up a poll soon, if anyone guesses the bey correctly, they can see and download the file. Otherwise I might make it available to non-winners if they pay a fee of 1 USD.

Alright.  I'm actually assembling it now but no guarantees I will be able to print it tomorrow or today.  I want that file for the other burst remake.
I get it even if I don't guess correctly, right?  Because I am a tester?  You don't have to answer.
Dec. 09, 2020  1:30 AM
 
(Dec. 09, 2020  1:14 AM)Master_chanter0 Wrote:
(Dec. 09, 2020  12:38 AM)GreenK9148 Wrote: I have the prototype ready:https://www.tinkercad.com/things/5K2YCip...rion-proto

Also, in addition to phantom Orion, I will be making another 4D metal fight beyblade (burst remake), I was originally going to make it for myself. But, I will put up a poll soon, if anyone guesses the bey correctly, they can see and download the file. Otherwise I might make it available to non-winners if they pay a fee of 1 USD.

Alright.  I'm actually assembling it now but no guarantees I will be able to print it tomorrow or today.  I want that file for the other burst remake.
I get it even if I don't guess correctly, right?  Because I am a tester?  You don't have to answer.
 Idk. I’ll probably only give you a prototype of it.
Dec. 09, 2020  4:33 PM
 
(Dec. 09, 2020  1:30 AM)GreenK9148 Wrote:
(Dec. 09, 2020  1:14 AM)Master_chanter0 Wrote: Alright.  I'm actually assembling it now but no guarantees I will be able to print it tomorrow or today.  I want that file for the other burst remake.
I get it even if I don't guess correctly, right?  Because I am a tester?  You don't have to answer.
 Idk. I’ll probably only give you a prototype of it.

Alright. Update, 3D printer is assembled and fully functional. I will expect to be able to have a good print of it Friday, absolute latest. More likely today however. And that's fine.
Dec. 09, 2020  5:11 PM
 
(Dec. 09, 2020  4:33 PM)Master_chanter0 Wrote:
(Dec. 09, 2020  1:30 AM)GreenK9148 Wrote:  Idk. I’ll probably only give you a prototype of it.

Alright.  Update, 3D printer is assembled and fully functional.  I will expect to be able to have a good print of it Friday, absolute latest.  More likely today however.  And that's fine.

Apparently, 2 people voted that I’m too bad soooooooo
Dec. 09, 2020  7:13 PM
 
(Dec. 09, 2020  5:11 PM)GreenK9148 Wrote:
(Dec. 09, 2020  4:33 PM)Master_chanter0 Wrote: Alright.  Update, 3D printer is assembled and fully functional.  I will expect to be able to have a good print of it Friday, absolute latest.  More likely today however.  And that's fine.

Apparently, 2 people voted that I’m too bad soooooooo

I was wondering about that. You changed to poll but my vote stands.
Dec. 09, 2020  10:48 PM
 
(Dec. 09, 2020  7:13 PM)Master_chanter0 Wrote:
(Dec. 09, 2020  5:11 PM)GreenK9148 Wrote: Apparently, 2 people voted that I’m too bad soooooooo

I was wondering about that.  You changed to poll but my vote stands.

What was your vote again? Sorry
Dec. 09, 2020  10:49 PM
 
(Dec. 09, 2020  10:48 PM)GreenK9148 Wrote:
(Dec. 09, 2020  7:13 PM)Master_chanter0 Wrote: I was wondering about that.  You changed to poll but my vote stands.

What was your vote again? Sorry

Diablo nemesis.
Dec. 09, 2020  11:07 PM
 
GreenK9148
so
uh
did you ever finish my commission?
just wondering about any progress
Dec. 09, 2020  11:17 PM
 
(Dec. 09, 2020  11:07 PM)LeonidasKerbeus Wrote: GreenK9148
so
uh
did you ever finish my commission?
just wondering about any progress

I wasn’t sure if you responded to me saying it was a paid commission. I do have a place holder for you though, and I can start whenever.
Dec. 10, 2020  5:00 PM
 
(Dec. 09, 2020  11:17 PM)GreenK9148 Wrote:
(Dec. 09, 2020  11:07 PM)LeonidasKerbeus Wrote: GreenK9148
so
uh
did you ever finish my commission?
just wondering about any progress

I wasn’t sure if you responded to me saying it was a paid commission. I do have a place holder for you though, and I can start whenever.

I will print orion tonight. I need to recalibrate the printer.
Dec. 16, 2020  3:38 AM
 
I noticed a problem with Tempo, it doesn’t fit on launchers
Dec. 21, 2020  8:47 PM
 
(Dec. 16, 2020  3:38 AM)6Jupiter5 Wrote: I noticed a problem with Tempo, it doesn’t fit on launchers

Did you forget to take the supports off?

GreenK9148 I printed tempo but I flipped it upside down and somehow made it left spin in the process I was laughing so hard.
Dec. 21, 2020  9:23 PM
 
(Dec. 21, 2020  8:47 PM)Master_chanter0 Wrote:
(Dec. 16, 2020  3:38 AM)6Jupiter5 Wrote: I noticed a problem with Tempo, it doesn’t fit on launchers

Did you forget to take the supports off?

GreenK9148 I printed tempo but I flipped it upside down and somehow made it left spin in the process I was laughing so hard.

What supports?
Dec. 21, 2020  9:41 PM
 
(Dec. 21, 2020  9:23 PM)6Jupiter5 Wrote:
(Dec. 21, 2020  8:47 PM)Master_chanter0 Wrote: Did you forget to take the supports off?

GreenK9148 I printed tempo but I flipped it upside down and somehow made it left spin in the process I was laughing so hard.

What supports?

Did you slice it with supports?
Dec. 21, 2020  9:46 PM
 
(Dec. 21, 2020  9:41 PM)Master_chanter0 Wrote:
(Dec. 21, 2020  9:23 PM)6Jupiter5 Wrote: What supports?

Did you slice it with supports?

I have no clue what you’re talking about. Here’s some pictures: https://drive.google.com/file/d/1EDP62MC...p=drivesdk , https://drive.google.com/file/d/1YleRt-E...p=drivesdk , https://drive.google.com/file/d/1BKzazx5...p=drivesdk
Dec. 21, 2020  9:51 PM
 
(Dec. 21, 2020  9:46 PM)6Jupiter5 Wrote:
(Dec. 21, 2020  9:41 PM)Master_chanter0 Wrote: Did you slice it with supports?

I have no clue what you’re talking about. Here’s some pictures: https://drive.google.com/file/d/1EDP62MC...p=drivesdk , https://drive.google.com/file/d/1YleRt-E...p=drivesdk , https://drive.google.com/file/d/1BKzazx5...p=drivesdk

No, you didn't then. Ok I see what you mean.
fyi (Click to View)
Prev
Page 6
Next