Create my bey

Big Bang nova  1D hurricane UL
absorb dash

Describe it

---

Just who the hell do you think I am!? 

I kinda miss CrazyAreis' posts

I kinda miss CrazyAreis' posts

Same here

Crazyareis can you make my bey helios maiden
It's layer is a combination of the venom base and 
Regalia genesis layer it has some rubber and the disk and driver I have.
Thank you

---

Creator/owner of beyblade burst apocalypse.
Maiden will awaken and destroy genesis once more!
i have returned

Crazyareis can you make my bey helios maiden
It's layer is a combination of the venom base and 
Regalia genesis layer it has some rubber and the disk and driver I have.
Thank you

Crazyaries doesn't take requests. Even if he did, they would be paid requests and would require a much more detailed explanation than that.

---

[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif][/font]

Crazyareis can you make my bey helios maiden
It's layer is a combination of the venom base and 
Regalia genesis layer it has some rubber and the disk and driver I have.
Thank you

Crazyaries doesn't take requests. Even if he did, they would be paid requests and would require a much more detailed explanation than that.

I don't mind paiding money to get my bey plus maiden is a one of kind bey. Crazyareis work is very good and neat.

---

Creator/owner of beyblade burst apocalypse.
Maiden will awaken and destroy genesis once more!
i have returned

I already have a 3d model but I would need it to be "optimized" and what I mean by that is I believe my model is too simple but I am a beginner after all.

I already have a 3d model but I would need it to be "optimized" and what I mean by that is I believe my model is too simple but I am a beginner after all.

Everyone has to start somewhere, and simplicity is more often than not better than something super complicated. Start small. Grow from there.

---

TwoTripleOh#8201

I'm doing paid commissions if anyone has a bey they want created.

Dacatman25 drew this for me could someone try to make it and then send me the link to the stl if not coming up pm your email and i will send it

---

check out my tinkerCAD: https://www.tinkercad.com/users/gHnoS1wJ...delbladers
while your at it check out my Youtube Channel:https://www.youtube.com/channel/UCJ4pRLb...subscriber

 twitch

I've complete the 3D model of Blitz Unicorno in Burst format. But I haven't make it real because I used too much money on previous beys and now I don't have enough money...
I prepared a Layer and a Driver for Blitz Unicorno and I think Disc Triple will be a good choice so I didn't design the disc (Ans I think I have already complete the Alphabet for Disc...)

Layer - Blitz Unicorno (bU)

Spoiler (Click to View)

One thing that may disapoint you is that I didn't add the function of mode change on this layer. I think Assault mode is the one that people usually use so I just make it in Assault mode.

Driver - Dive (Dv)

Spoiler (Click to View)

The red tip is rubber. This Driver is basically a Burst format of RSF.
Also, In order to realize the feature of Track 100, I made this driver short. So the bey would be good at Upper attack, but you need to be careful as the disc may touch the stadium.

File Download

I just made a superking ring version of this. Tell me if there are any issues as I haven't printed and tested it

link

Okay, quick update on this.

I actually printed it a while ago and have been testing it. With the 2A chassis, it has similar power to the Brave ring.

P.S. Be careful when you try to stop it with your hand. It actually scratched mine.

---

---

I created a Winning Valkyrie sparking ring. It wasn't too hard, just had to line everything up. https://www.tinkercad.com/things/eBebzRo...rking-ring

I just tried this out and I ran into some problems. The spaces on the bottom where the chassis should fit in (the area with the chassis name) is too small and I had to keep removing material with my nippers to make it fit in a chassis. Even after doing that, the tabs where the chassis should snap into are too far, preventing the chassis from ever fitting in. This issue doesn’t matter after you put the whole thing together, as the performance tip locks it in using the chip. If this was one of your recent ones, I’d recommend looking at your other rings to see if they have the same problems.

---

i'm getting reaper deathscyther, and the crown driver check out the website this is better than shapeways, https://i.materialise.com/en

---

check out my tinkerCAD: https://www.tinkercad.com/users/gHnoS1wJ...delbladers
while your at it check out my Youtube Channel:https://www.youtube.com/channel/UCJ4pRLb...subscriber

 twitch

Here's my first custom superking/sparking ring: https://www.tinkercad.com/things/3cC05UT8R57
It's based on the JJBA stand Killer Queen. I meant it to be an attack/defense type but now I guess it's full attack.

---

Forgive me for kinda spamming the thread, but I made another one.
https://www.tinkercad.com/things/1LmiekmWyQd
Using CrazyAries's Flash Sagittario and L/R ring template, I made a Flash ring and Sagittario chip.

---

Oh man! You're right, I do have to fix that. Thanks for pointing it out!

---

I created a Winning Valkyrie sparking ring. It wasn't too hard, just had to line everything up. https://www.tinkercad.com/things/eBebzRo...rking-ring

I just tried this out and I ran into some problems. The spaces on the bottom where the chassis should fit in (the area with the chassis name) is too small and I had to keep removing material with my nippers to make it fit in a chassis. Even after doing that, the tabs where the chassis should snap into are too far, preventing the chassis from ever fitting in. This issue doesn’t matter after you put the whole thing together, as the performance tip locks it in using the chip. If this was one of your recent ones, I’d recommend looking at your other rings to see if they have the same problems.

Thanks for pointing this out. I'm working on fixing up some designs!

Thanks for this nice post

Someone knows the dimensions of the 3d printed beys?
I'm thinking about print am Achilles and I want to know what size (Centimeters or milimeters).
Thanks in advance

Someone knows the dimensions of the 3d printed beys?
I'm thinking about print am Achilles and I want to know what size (Centimeters or milimeters).
Thanks in advance

https://www.tinkercad.com/things/d59wSax...s-achilles / can I just print it or i need to ajust it?

---

Just who the hell do you think I am!? 

Someone knows the dimensions of the 3d printed beys?
I'm thinking about print am Achilles and I want to know what size (Centimeters or milimeters).
Thanks in advance

https://www.tinkercad.com/things/d59wSax...s-achilles / can I just print it or i need to ajust it?

I would recommend using this https://www.tinkercad.com/things/kXSvvG9...illes/edit it has the infinity rings for ziphos (Ziphos rings)

https://www.tinkercad.com/things/d59wSax...s-achilles / can I just print it or i need to ajust it?

I would recommend using this https://www.tinkercad.com/things/kXSvvG9...illes/edit it has the infinity rings for ziphos (Ziphos rings)

It didn't work it's yours? if positive could you please make it public?

---

Just who the hell do you think I am!? 

I would recommend using this https://www.tinkercad.com/things/kXSvvG9...illes/edit it has the infinity rings for ziphos (Ziphos rings)

It didn't work it's yours? if positive could you please make it public?

Alright it was a copy made by this guy https://www.tinkercad.com/things/c40jqIM...e-achilles

https://www.tinkercad.com/things/feSapYZh9rR

I made a cutting template for making Superking/Sparking rings out of existing layers. Use this with CrazyAries's ring templates.

---

i tried to make a double chassis heres the link https://www.tinkercad.com/things/8DL8sKs...t-sparking

---

check out my tinkerCAD: https://www.tinkercad.com/users/gHnoS1wJ...delbladers
while your at it check out my Youtube Channel:https://www.youtube.com/channel/UCJ4pRLb...subscriber

 twitch