Ask a question, get an answer! #2

(Jan. 10, 2014  3:44 PM)Kai-V Wrote:
(Jan. 10, 2014  3:29 PM)EugeneBeyGeek Wrote: Does it have a best performance tip than quake for the m145 combo ? Does the high cutted quake : [Image: StormCapricorne_Q.jpg] is best than the other version i've got : [Image: Q.jpg] ?
In wich bey can i procurate the first ?

Beywiki's Storm Capricorne M145Q article will give you all the answers :
http://wiki.worldbeyblade.org/index.php/...orne_M145Q

Technically you can use RF with M145, but it is generally a Track you should avoid since nobody wants a destabilised combination with poor Stamina.
With a good launcher, this combo is like all other attack combos. I've buy the Takara-tomy version of storm capricorne (the booster) and i've got the low-cutted quake (the picture of violet quake i've post)
As the Beywiki article clearly says, of course you got the second mould by buying a Booster from TAKARA-TOMY, because you would have to be lucky and get one of the first-press versions of this Booster in order to get the first mould. It is very rare.

The tip is off-center even if you put it in the centered mode. There are better Tracks for Attack combinations.
(Jan. 10, 2014  5:34 PM)Kai-V Wrote: As the Beywiki article clearly says, of course you got the second mould by buying a Booster from TAKARA-TOMY, because you would have to be lucky and get one of the first-press versions of this Booster in order to get the first mould. It is very rare.

The tip is off-center even if you put it in the centered mode. There are better Tracks for Attack combinations.
I've try with M145 and RF and it is so bad. What can i use better than that ? The jumping ability is my favourite, i've got the conviction one day, i will win a big tournament wit Storm Capricorn or another bey with M145q. I've got a angle compass and a Rev up launcher, and soon i will buy a attack type stadium and a launcher grip for have the best of capricorn. I know everybody think it is the worst bey in the world but i don't think so.
Almost any track other than M145 with RF, perhaps?

ES used to be marginally less awful on it than a lot of tips with M145, if I remember correctly. Blunts the tip real fast though.
(Jan. 10, 2014  5:50 PM)th!nk Wrote: Almost any track other than M145 with RF, perhaps?

ES used to be marginally less awful on it than a lot of tips with M145, if I remember correctly. Blunts the tip real fast though.
I know also M145q is best than Jumping Base Wink (Plastic generation)
RF with M145 is the worst i've try.
Is putting custom stickers on clear wheels legal for tournaments? I'm currently making a custom homage to Driger MS and I want to put some stickers on a clear wheel so it's the original colors of Driger, but I have to use custom stickers because I don't want the engraving on the wheel to show, if I just painted it you would still see the engraving.
(Jan. 11, 2014  2:40 AM)Eco Wrote: Is putting custom stickers on clear wheels legal for tournaments? I'm currently making a custom homage to Driger MS and I want to put some stickers on a clear wheel so it's the original colors of Driger, but I have to use custom stickers because I don't want the engraving on the wheel to show, if I just painted it you would still see the engraving.

They can only be applied in the same locations as the parts' initial stickers should be. Even TAKARA-TOMY clearly banned the custom stickers for Hell Kerbecs BD145DS published by CoroCoro, one of their official affiliates, because they obstructed parts that were meant to make contact. This rule exists because the impact is different on a stickered surface than directly on a metal or plastic area.
(Jan. 11, 2014  2:46 AM)Kai-V Wrote:
(Jan. 11, 2014  2:40 AM)Eco Wrote: Is putting custom stickers on clear wheels legal for tournaments? I'm currently making a custom homage to Driger MS and I want to put some stickers on a clear wheel so it's the original colors of Driger, but I have to use custom stickers because I don't want the engraving on the wheel to show, if I just painted it you would still see the engraving.

They can only be applied in the same locations as the parts' initial stickers should be. Even TAKARA-TOMY clearly banned the custom stickers for Hell Kerbecs BD145DS published by CoroCoro, one of their official affiliates, because they obstructed parts that were meant to make contact. This rule exists because the impact is different on a stickered surface than directly on a metal or plastic area.

Is painting a clear wheel still legal? I'm mostly trying to cover a heavily engraved area of Scythe Kronos' clear wheel, or at least mask it. I might just have to look for a different clear wheel.
A light coat of paint is legal, I believe.
(Jan. 10, 2014  8:34 AM)th!nk Wrote: Oh, hey BeyCenter! It's been quite some time but I remember you, it's nice to see you back. If you still have your old stuff, you should check out the new Limited Format, as you might already have the parts to play it haha Smile

Those are just the differently shaped ones for Zero G - Hasbros are shaped like Crosses whereas Takara's are Octagonal. In terms of brand differences, Hasbro's Dragooon seems to be the lighter of the two TT molds (though for all we know they might use both like TT, unlikely but hard to say as I've only seen one Ronin Dragoon underside so far), but aside from that they're the same. Oh, their F230 is the worst one in terms of spin time, but Takara Orange F230's (the best ones) are out of most people's reach anyhow, and we haven't seen anything of Hasbro's orange one yet IIRC. So yeah, you're fine to buy Hasbro as long as you've got a string launcher lying around seeing as they haven't released a decent launcher in a couple of years.

And yeah, some people dismissed the swaying gimmick of the Zero G stadia as pointless gimmickry, but as far as I know none of them actually played a competitive Zero G tournament - they're very much a competitive stadium and the gimmick is by no means random chance. I don't have one but everyone who does has said they're a lot of fun, so if you can get one I'd say go for it!

Thanks! It has been a while. So, should I buy a dragoon online then, because in guessing that heavier is better for attack, if Dragoon is attack based... But both of my string launchers have a little part of the string sporting of at the top, is there anyway to prevent that? It happens to all my string launchers.
That used to happen to me. I just cut the string that is outside.

If you want a Dragooon based attacker assuming you have BD145 and a mint RF/R2F/LRF get Gladiator Bahamdia and Dark Knight Dragooon to make Bahamdia Dragooon BD145R2F. And also get the Ultimate Synchrome DX Sets so you can make a good Zero-G combo Wyvang Dragooon SA165(ZRG Attack Mode)GF and a Limited combo Dark Knight Wyvang(Crystal Up Mode) and assuming you have a GB145 and a R2F.
To prevent it, I'd suggest lubricating your launchers, particularly the rod the string rubs against and the bushing it moves through.

That fraying results in a loss of string length so it's pretty bad, it's one of the things I'll be posting about soon.
Where and when will be other WBO tournaments ? (and can one will be in the region of Lanaudière, in the province of Quebec Joyful_2 ?) If no, it is legal to organize myself a public tournament ?
(Jan. 11, 2014  3:14 PM)EugeneBeyGeek Wrote: Where and when will be other WBO tournaments ? (and can one will be in the region of Lanaudière, in the province of Quebec Joyful_2 ?) If no, it is legal to organize myself a public tournament ?

Well, you can always check the Upcoming Events tab to see if there is a tournament in your region. Smile
As for organizing a tournament, you just need to have a legal stadium and at least 8 participants. Then you propose the event in the Event Proposals forum and get it approved by the WBO. Check out the Event Guide there for more info. Oh, and you can also read threads in the Organizer's Circle Forum to get tips on how to get participants among other tourney-related stuff.

Oh and the question doesn't belong here btw. Tongue_out
I just got my b:d yesterday. Noticed that I'm only getting about 1: 40 of spin time. How do I know which mold I have or how long does it take to get broken in.
(Jan. 11, 2014  6:00 PM)Pinoy Blader Wrote: I just got my b:d yesterday. Noticed that I'm only getting about 1: 40 of spin time. How do I know which mold I have or how long does it take to get broken in.

Only 1:40 of solo-spin time, on a stock Phantom Orion? interesting to know, TT or Hasbro Hyperblade? Tongue_out

In any case, you may just have a really bad mold. If I remember correctly, most molds have a spin time from 3:00-5:00 minutes. 7 minute molds aren't too easy to find. Tongue_out
(Jan. 11, 2014  6:06 PM)Leone19 Wrote:
(Jan. 11, 2014  6:00 PM)Pinoy Blader Wrote: I just got my b:d yesterday. Noticed that I'm only getting about 1: 40 of spin time. How do I know which mold I have or how long does it take to get broken in.

Only 1:40 of solo-spin time, on a stock Phantom Orion? interesting to know, TT or Hasbro Hyperblade? Tongue_out

In any case, you may just have a really bad mold. If I remember correctly, most molds have a spin time from 3:00-5:00 minutes. 7 minute molds aren't too easy to find. Tongue_out
It's a takara tomy. I feel like when I launch it it's aggressive and wobbly. It could possibly be the stadium I cannot find my takara stadiums. I'll do some more test
B;D doesn't have different molds guys, it's been stressed before.
(Jan. 11, 2014  9:15 PM)Tri Wrote: B;D doesn't have different molds guys, it's been stressed before.
Section of BGrin from Beywiki

Quote:Bearing Drive features, inside its plastic casing, a metal shaft connected to the middle of the 4D Bottom, a metal casing that is connected to the tip of BGrin, and metal spheres in between them. Sometimes, the bearing is able to stop the shaft from spinning, resulting in less friction between the stadium floor and itself. These factors increase Stamina, but there exists many mold variations even within the same distributing company and general inconsistencies that can make this rarely happen. BGrin's solo spin time often ranges between 2-5 minutes.
Mold variations, as in that mold has many different performance differences.
(Jan. 11, 2014  9:23 PM)Tri Wrote: Mold variations, as in that mold has many different performance differences.

Ah, what a meant with that quote was that there are mold variations, leading to the expression of having a "5 minute mold". Tongue_out

Sorry about that.
Urrggggh I'll add that to my list of stuff to discuss and fix on beywiki because it's all about the bearing tbh.
(Jan. 11, 2014  9:30 PM)th!nk Wrote: Urrggggh I'll add that to my list of stuff to discuss and fix on beywiki because it's all about the bearing tbh.
Cool it would be good to know more about he bearings in Orion. Ive been watching videos and mine spins pretty differently from them. Pretty dissapointed, it does not stay balanced in the center of the stadium.
(Jan. 11, 2014  10:00 PM)Pinoy Blader Wrote:
(Jan. 11, 2014  9:30 PM)th!nk Wrote: Urrggggh I'll add that to my list of stuff to discuss and fix on beywiki because it's all about the bearing tbh.
Cool it would be good to know more about he bearings in Orion. Ive been watching videos and mine spins pretty differently from them. Pretty dissapointed, it does not stay balanced in the center of the stadium.
You will have better results of you buy the Hasbro Hyperblade version, (mine turn more than 7 mins Joyful_2) It is the best buying i've made because Phatom II is so heavy and keeps stamina. I recommend it to you.
(Jan. 11, 2014  11:41 PM)EugeneBeyGeek Wrote:
(Jan. 11, 2014  10:00 PM)Pinoy Blader Wrote:
(Jan. 11, 2014  9:30 PM)th!nk Wrote: Urrggggh I'll add that to my list of stuff to discuss and fix on beywiki because it's all about the bearing tbh.
Cool it would be good to know more about he bearings in Orion. Ive been watching videos and mine spins pretty differently from them. Pretty dissapointed, it does not stay balanced in the center of the stadium.
You will have better results of you buy the Hasbro Hyperblade version, (mine turn more than 7 mins Joyful_2) It is the best buying i've made because Phatom II is so heavy and keeps stamina. I recommend it to you.
Just wondering, What do you mean by Phantom II?