B-205 official images from the box:

---

Perfect Belial action:

Wow, I mean... I knew it was true about Fusion' and Accel', but man... I still can't believe they did the penultimate versions of the two OG protagonist's beys dirty like that 💀

Well technically Savior and Astral r the penultimate ones right? I wonder if I should scrap my V Gear in favor of this yet though. TBH I've not used Vn+V ever since I acquired a new cap MX, which I doubt I'm gonna replace anytime soon

Now that we have the remaining parts shown for this set, I'll bring those up too.

Spread' looks about as good as I expected and seems very promising for stamina, at least if it's anything like it's ancestor disk. I also really like the Knuckle disk detail on top, that's actually really cool, makes it truly feel like Spriggan's own Legacy disk.

VS gear looks like a modified V Gear, as it's essentially that but with a free spinning mini S Gear attached around it. I don't think it can be flipped around though, but it looks interesting. I doubt it'll be good though, the red ring looks like there's too rough of a perimeter for any LAD potential, and possible scrape risk too.

I'm still planning on getting the set, but I already think Spread' will have potential and the VS Gear doesn't impress me really.

I still think giving A' and F' purely for forced nostalgia bait is a bit dumb though, but at least it gives me the best excuse to switch the drivers to something that not only performs better, but suits it better too, similarly to how I used the Nexus-D disk on Gatling Dragon, Guard (dark green) on Chain Kerbeus, or Revolve (light green) on Wind Knight. Qt' would suit Burst Spriggan more, and Ev' or Ul would fit Ultimate better. Kinda wish we had a blue Ul' though.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

I still think giving A' and F' purely for forced nostalgia bait is a bit dumb though, but at least it gives me the best excuse to switch the drivers to something that not only performs better, but suits it better too, similarly to how I used the Nexus-D disk on Gatling Dragon, Guard (dark green) on Chain Kerbeus, or Revolve (light green) on Wind Knight. Qt' would suit Burst Spriggan more, and Ev' or Ul would fit Ultimate better. Kinda wish we had a blue Ul' though.

While people like me who like keeping beys stock regardless of how bad they are get to suffer. At least they're the same colors as the og drivers.

Left Burst (heh) doesn't look half bad, but also just feels like a more bland version of left world. And spread' is just legacy spriggan edition which is fine, but the error with the symbol saying 8' instead of S' is funny.

---

If I get a little too annoyed by beyblade of all things then I apologize

Artist render of a Screw Fox avatar by Faith

Wow, I mean... I knew it was true about Fusion' and Accel', but man... I still can't believe they did the penultimate versions of the two OG protagonist's beys dirty like that 💀

Well technically Savior and Astral r the penultimate ones right? I wonder if I should scrap my V Gear in favor of this yet though. TBH I've not used Vn+V ever since I acquired a new cap MX, which I doubt I'm gonna replace anytime soon

Turns out penultimate doesn't mean what I thought it meant 😭

I was referring to them being the final ever releases of Valkyrie and Spriggan; and the ultimate culmination of the versions that came before them, but with how I worded it ig you're technically right lol

I still think giving A' and F' purely for forced nostalgia bait is a bit dumb though, but at least it gives me the best excuse to switch the drivers to something that not only performs better, but suits it better too, similarly to how I used the Nexus-D disk on Gatling Dragon, Guard (dark green) on Chain Kerbeus, or Revolve (light green) on Wind Knight. Qt' would suit Burst Spriggan more, and Ev' or Ul would fit Ultimate better. Kinda wish we had a blue Ul' though.

While people like me who like keeping beys stock regardless of how bad they are get to suffer. At least they're the same colors as the og drivers.

Left Burst (heh) doesn't look half bad, but also just feels like a more bland version of left world. And spread' is just legacy spriggan edition which is fine, but the error with the symbol saying 8' instead of S' is funny.

Normally I'm on the same boat, though there are those exceptions where I'd rather just headcanon my own stock combos. When TT makes things like Death/Abyss Diabolos with 4T.Mr'/5.F' or Guardian Kerbeus with H.R, sometimes it's better to just make something up to snuff and more fitting IMO. Same applies to the new Spriggan, without a doubt. And yeah, I usually try to put drivers that match the OG colours to make it fitting.

And hold on wait, where is this error? I can't seem to find it. Maybe I'm looking at the wrong place.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

While people like me who like keeping beys stock regardless of how bad they are get to suffer. At least they're the same colors as the og drivers.

Left Burst (heh) doesn't look half bad, but also just feels like a more bland version of left world. And spread' is just legacy spriggan edition which is fine, but the error with the symbol saying 8' instead of S' is funny.

Normally I'm on the same boat, though there are those exceptions where I'd rather just headcanon my own stock combos. When TT makes things like Death/Abyss Diabolos with 4T.Mr'/5.F' or Guardian Kerbeus with H.R, sometimes it's better to just make something up to snuff and more fitting IMO. Same applies to the new Spriggan, without a doubt. And yeah, I usually try to put drivers that match the OG colours to make it fitting.

And hold on wait, where is this error? I can't seem to find it. Maybe I'm looking at the wrong place.

I'm on the same boat too i usually keep all my beys stock while getting copies for each to give an actual combo that fits them. But with this both A' & F' are coming off both Burst and Ultimate as soon as i get them as Many point out quattro' and Evo or UR are the ones that i'm putting on them an just ignore F' & A' was a thing. I though I was one of teh few ones that change combos of a bey cause it doesnt fit them and putting the ones that not only is better but also with colors that match them better too nice to know others does that to lol.

While people like me who like keeping beys stock regardless of how bad they are get to suffer. At least they're the same colors as the og drivers.

Left Burst (heh) doesn't look half bad, but also just feels like a more bland version of left world. And spread' is just legacy spriggan edition which is fine, but the error with the symbol saying 8' instead of S' is funny.

Normally I'm on the same boat, though there are those exceptions where I'd rather just headcanon my own stock combos. When TT makes things like Death/Abyss Diabolos with 4T.Mr'/5.F' or Guardian Kerbeus with H.R, sometimes it's better to just make something up to snuff and more fitting IMO. Same applies to the new Spriggan, without a doubt. And yeah, I usually try to put drivers that match the OG colours to make it fitting.

And hold on wait, where is this error? I can't seem to find it. Maybe I'm looking at the wrong place.

You can find a picture of the error (which appears to be a factory misprint) here.

Now that we have the remaining parts shown for this set, I'll bring those up too.

Spread' looks about as good as I expected and seems very promising for stamina, at least if it's anything like it's ancestor disk. I also really like the Knuckle disk detail on top, that's actually really cool, makes it truly feel like Spriggan's own Legacy disk.

VS gear looks like a modified V Gear, as it's essentially that but with a free spinning mini S Gear attached around it. I don't think it can be flipped around though, but it looks interesting. I doubt it'll be good though, the red ring looks like there's too rough of a perimeter for any LAD potential, and possible scrape risk too.

I'm still planning on getting the set, but I already think Spread' will have potential and the VS Gear doesn't impress me really.

I still think giving A' and F' purely for forced nostalgia bait is a bit dumb though, but at least it gives me the best excuse to switch the drivers to something that not only performs better, but suits it better too, similarly to how I used the Nexus-D disk on Gatling Dragon, Guard (dark green) on Chain Kerbeus, or Revolve (light green) on Wind Knight. Qt' would suit Burst Spriggan more, and Ev' or Ul would fit Ultimate better. Kinda wish we had a blue Ul' though.

Wait, you managed to find a use for guard?
(Keep in mind my collection is exponentially smaller than the rest of u guys', hence my relative novice-like shock towards anything that's not the norm)

While people like me who like keeping beys stock regardless of how bad they are get to suffer. At least they're the same colors as the og drivers.

Left Burst (heh) doesn't look half bad, but also just feels like a more bland version of left world. And spread' is just legacy spriggan edition which is fine, but the error with the symbol saying 8' instead of S' is funny.

And hold on wait, where is this error? I can't seem to find it. Maybe I'm looking at the wrong place.

Ok it doesn't look exactly like 8' which I didn't quite catch until after posting that so oops, but still looks more like 8' than S

     Spread               8'               Spread'

---

If I get a little too annoyed by beyblade of all things then I apologize

Artist render of a Screw Fox avatar by Faith

And hold on wait, where is this error? I can't seem to find it. Maybe I'm looking at the wrong place.

Ok it doesn't look exactly like 8' which I didn't quite catch until after posting that so oops, but still looks more like 8' than S

     Spread               8'               Spread'

Plot twist: 8' 's prongs were used to make this disc, or the photo editor fail.

Now that we have the remaining parts shown for this set, I'll bring those up too.

Spread' looks about as good as I expected and seems very promising for stamina, at least if it's anything like it's ancestor disk. I also really like the Knuckle disk detail on top, that's actually really cool, makes it truly feel like Spriggan's own Legacy disk.

VS gear looks like a modified V Gear, as it's essentially that but with a free spinning mini S Gear attached around it. I don't think it can be flipped around though, but it looks interesting. I doubt it'll be good though, the red ring looks like there's too rough of a perimeter for any LAD potential, and possible scrape risk too.

I'm still planning on getting the set, but I already think Spread' will have potential and the VS Gear doesn't impress me really.

I still think giving A' and F' purely for forced nostalgia bait is a bit dumb though, but at least it gives me the best excuse to switch the drivers to something that not only performs better, but suits it better too, similarly to how I used the Nexus-D disk on Gatling Dragon, Guard (dark green) on Chain Kerbeus, or Revolve (light green) on Wind Knight. Qt' would suit Burst Spriggan more, and Ev' or Ul would fit Ultimate better. Kinda wish we had a blue Ul' though.

Wait, you managed to find a use for guard?
(Keep in mind my collection is exponentially smaller than the rest of u guys', hence my relative novice-like shock towards anything that's not the norm)

Yep. Not that it's amazing or anything, but Guard unexpectedly made Chain Kerbeus a way better stock combo than Yard' does. Better LAD, surprisingly can recover it's balance, plus the added height means more contact with the chains than the green blades. It could very well just be me though. I find it better than Atomic, oddly enough.

Also keeping in mind that I'm restricting myself to using translucent dark green drivers only, for the sake of consistency, so things like Moment, Orbit Metal, Bearing Drift are sadly out of the question for me.

And hold on wait, where is this error? I can't seem to find it. Maybe I'm looking at the wrong place.

Ok it doesn't look exactly like 8' which I didn't quite catch until after posting that so oops, but still looks more like 8' than S

     Spread               8'               Spread'

I do see what you mean though, that very much does look like an 8 with how tightly closed that S looks, not sure why it's like that, clearly they can fit a proper S, but whatever, it looks fine otherwise.

---

My Cho-Z Reaper Deathscyther .12.Cr concept render, click below to see!

Spoiler (Click to View)

No I don't plan on doing more yet.

I should probably go back to making fan custom Zero G beyblade concepts again

Ultimate Valkyrie has 3 metal/silver painted points on its layer? Or is it just me

The error originates from an image from the Beyblade Database Project on Twitter, which you can also find here under the second spoiler tag.

It actually originates from Takara Tomy's official content. I did nothing to the part images for those posts so I don't appreciate you framing it like my project originated this "error" that is just "the engraved S look too much like an 8" lol

The error originates from an image from the Beyblade Database Project on Twitter, which you can also find here under the second spoiler tag.

It actually originates from Takara Tomy's official content. I did nothing to the part images for those posts so I don't appreciate you framing it like my project originated this "error" that is just "the engraved S look too much like an 8" lol

That is not how I intended it to be interpreted, so I apologize if it gave the wrong impression or caused any issues for the project. I assumed that the error was the result of a misprint when manufacturing the part and was pointing them towards an image that displayed the error, not suggesting that anyone, or their project, was in the wrong.

My original post has been updated to reflect this.

There is BU Lucifer leak concept art, Looks like there is rubber burst stopper in the middle like bahamut. But the blade gimmick kinda weird maybe like burn hyperion, i hope its not bad

There is BU Lucifer leak concept art, Looks like there is rubber burst stopper in the middle like bahamut. But the blade gimmick kinda weird maybe like burn hyperion, i hope its not bad

It also look very close to variant as well which i dont think fans will like cause we know how variant was not the best not the worst haha.

The design for me personally looks like a mixture of both Variant and The End combined into one, the core looks nice but the blade is super interesting, those pink blades coming out of it look kinda goofy though

---

PFP: Baby picture of me and one of my irl friends / ANY PRONOUNS

Also look like there is metal similar to Super M and King M, i hope its not fusionable cuz it will look weird with Super and King

Final Lucifer BR. MBD-5.

Final Lucifer BR. MBD-5.

Wait, its this official?

Final Lucifer BR. MBD-5.

Its not official, its rumored by beyblade github and now deleted

Final Lucifer BR. MBD-5.

Wait, its this official?

Yes it’s from the Vocare Project.

Final Lucifer BR. MBD-5.

Its not official, its rumored by beyblade github and now deleted

Ok thank you.

---

Wait, its this official?

Yes it’s from the Vocare Project.

Mmmmmmmm

Final Lucifer BR. MBD-5.

Please do research before posting



There is no Final Lucifer I made it up before as a joke, something of which that is NOT on the site that reports it, something that was easily verified if you went to the site to actually check.

Funny thing is, i wouldnt have been surprised if that was the name and combo for Lucy lol.