Takara Tomy Beyblade Burst - Upcoming Release & Rumor Thread

[quote pid='1447803' dateline='1531404510']
[Image: Dh6qFBBUYAA554U.jpg:large]
[/quote]
Is the blue one a new Maximum Garuda?
What is the name of the new Xcalibur's owner ?
(Jul. 12, 2018  8:22 PM)Flame-Byxis Wrote: [quote pid='1447803' dateline='1531404510']
[Image: Dh6qFBBUYAA554U.jpg:large]
Is the blue one a new Maximum Garuda?
[/quote]

Yes! Turn K is Garuda, which says in the description that it is optimal for endurance (stamina) type, but that power is hard to keep. This likely refers to the fact that all Super Z beys are off balance. CZ-3 looks similar to Regulus, but we'll have to wait and see
(Jul. 12, 2018  9:57 PM)CitrusNinja3 Wrote: Yes! Turn K is Garuda

Not confirmed.
Maximum Garuda was a mistake, doubt they would release another version of it.
This might be off topic, but why is Amaterios still not changing. I mean for the Xtreme driver. In fact, we've seen it so many times, plus the last release of it (Amaterios.7Meteor.Xtreme). And for the 0 disc, we've seen it on Emperor Forneus and Spriggan Requiem. Since Spriggan Requiem was such a popular release, I don't get why they have 0 on the new Amaterios.
Why is there an apostrophe next to the X for Xtreme? Does this have anything to do with the new 1' (One Prime) disc? Plus, the other sheet didn't have an X...
cz-1 could be a new Valkyrie? maybe phi breaks winning Valkyrie so valt gets a new and improved Valkyrie. cz-2 looks like a spriggan, left burst put it side by side to sr and they look identical. turn e looks like draciel. cz-3 looks like regulas and its a balance type too so maybe a new regulas? turn k looks like garuda and its a stamina type too, also maximum garuda. it looks like a new system is going to happen inside the cho z system.
1''s japanese spelling is pronounced "One Dash", so I assume X' is "Xtreme Dash". I find it interesting that we're starting to get retrains of parts as opposed to similar but different parts like we have been for a while, so hopefully these aren't one-offs.
(Jul. 13, 2018  12:21 AM)TrainiacJ Wrote: 1''s japanese spelling is pronounced "One Dash", so I assume X' is "Xtreme Dash". I find it interesting that we're starting to get retrains of parts as opposed to similar but different parts like we have been for a while, so hopefully these aren't one-offs.

I can definitely see the difference between 1 and 1', but I am confused on X'. What's the difference between X and X'?
(Jul. 12, 2018  10:20 PM)Z3t.i Wrote: This might be off topic, but why is Amaterios still not changing. I mean for the Xtreme driver. In fact, we've seen it so many times, plus the last release of it (Amaterios.7Meteor.Xtreme). And for the 0 disc, we've seen it on Emperor Forneus and Spriggan Requiem. Since Spriggan Requiem was such a popular release, I don't get why they have 0 on the new Amaterios.

(Edit Comment deleted, didn't see that what I said was already stated lol)
(Jul. 12, 2018  9:28 PM)BeybladeFanOff Wrote: What is the name of the new Xcalibur's owner ?

Jean Bogarde. French-pronounced Jean, not the English way like Gene.

Spelling may end up different, especially if they try to work an X in there.
The Nov cz2 is definitely a cho z spriggan. Left burst put them together and the design looks so similar. Not confirmed but looks like it
(Jul. 13, 2018  12:21 AM)TrainiacJ Wrote: 1''s japanese spelling is pronounced "One Dash", so I assume X' is "Xtreme Dash". I find it interesting that we're starting to get retrains of parts as opposed to similar but different parts like we have been for a while, so hopefully these aren't one-offs.

Yeah, I find it very weird that they call it "dash", but maybe to them, a "dash" is just a "mark". Or maybe that's what they call prime. Because that's no dash, in English that's "One Prime" and "X Prime"/"Xtreme Prime".

(Jul. 13, 2018  12:49 AM)ClearWing R34 Wrote: The Nov cz2 is definitely a cho z spriggan. Left burst put them together and the design looks so similar. Not confirmed but looks like it

You can't judge by silhouette. When Revive Phoenix was first revealed as "July New", they used Tornado Wyvern.

CitrusNinja3 made some notes on the silhouette similarities already. They may all be fillers of previous beys.

(Jul. 09, 2018  4:02 AM)CitrusNinja3 Wrote: Turn K is Hazard Kerbeus' true combo. It isn't that hard to identify by the silhouette

CZ-2's silhouette is of Jail Jormungand

The bey that looks to be one of the new amaterios beys has the 0 disc and a driver that has the greek letter Lambda, which is the equivalent of an L

CZ-1 might have Inferno Ifrit's silhouette, but it's hard to make out. Turn E seems to be an Epic Evileye silhouette
Guys if you put your brightness maximum level and you check out turn Fafnir you can sort a see the centre of the bey
(Jul. 13, 2018  12:51 AM)Frostic Fox Wrote:
(Jul. 13, 2018  12:21 AM)TrainiacJ Wrote: 1''s japanese spelling is pronounced "One Dash", so I assume X' is "Xtreme Dash". I find it interesting that we're starting to get retrains of parts as opposed to similar but different parts like we have been for a while, so hopefully these aren't one-offs.

Yeah, I find it very weird that they call it "dash", but maybe to them, a "dash" is just a "mark". Or maybe that's what they call prime. Because that's no dash, in English that's "One Prime" and "X Prime"/"Xtreme Prime".

Ah, I see what you mean now. I thought they were using a normal ' in that font and not a prime mark, haha. 1 Prime and Xtreme Prime definitely sound better for their purpose since they are retrains of old parts, but imo the parts should be referred to by what they are actually called, and between "Duo Eclipse" and "Super Z", I'm really not into all the misnomers floating around in Burst, haha. Hopefully when TT puts out their video for bX that can set the record straight.
(Jul. 13, 2018  1:04 AM)TrainiacJ Wrote: Ah, I see what you mean now. I thought they were using a normal ' in that font and not a prime mark, haha. 1 Prime and Xtreme Prime definitely sound better for their purpose since they are retrains of old parts, but imo the parts should be referred to by what they are actually called, and between "Duo Eclipse" and "Super Z", I'm really not into all the misnomers floating around in Burst, haha. Hopefully when TT puts out their video for bX that can set the record straight.

Yeah, they're clearly calling it dash and I'm not sure if they're using the exact prime symbol (many people do opt for just writing a single quote if they can't be bothered to dig for it, and CoroCoro is lazy on writing things in general with all their mispellings). So if you want to stick with dash, that's fine.

To me, this might be one of those things where I can't say I prefer the Japanese, because it's really not a dash.

Update, not gonna erase the rest:

Found this lovely gem.

f'(x) is pronounced:
f dasshu x (f ダッシュ x) -- Dash
or
f puraimu x (f プライム x) -- Prime

And then this one:
Quote:The symbol "′" is pronounced "prime" (USA) or "dash" (outside USA). For example, x′ is pronounced "x prime" or "x dash". x″ is pronounced "x double prime".

Still, it's an ugly name in my book, but I guess it's less a Japanese issue and more a rest-of-the-world thing. Yuck at calling it a "dash" when we already have a dash though, like why....

This is a cool read on the subject: How do you pronounce the symbol ′ in f′? Basically, prime is more common now, but in British English, it's more traditional to use "dash" and so countries outside of the US (Japan included) may use "dash" in pre-university and then switch to prime at university level.

Where were these things when I was looking earlier?

Edit: So I'm going to take it as the Z Achilles situation, of "Zee", "Zed", etc. You can pronounce it whatever is regular for your own language. In Japanese, that's Zetto, but most of us don't say that. We all write it Z just the same.
The weird thing is that we haven't seen Xtreme Prime. The combo picture for Yami-Terios has the normal Xtreme. Something is fishy here...
(Jul. 13, 2018  12:51 AM)Frostic Fox Wrote: CitrusNinja3 made some notes on the silhouette similarities already. They may all be fillers of previous beys.

(Jul. 09, 2018  4:02 AM)CitrusNinja3 Wrote: Turn K is Hazard Kerbeus' true combo. It isn't that hard to identify by the silhouette

CZ-2's silhouette is of Jail Jormungand

The bey that looks to be one of the new amaterios beys has the 0 disc and a driver that has the greek letter Lambda, which is the equivalent of an L

CZ-1 might have Inferno Ifrit's silhouette, but it's hard to make out. Turn E seems to be an Epic Evileye silhouette

The Turn K silhouette definitely doesn't look like Hazard Kerbeus since hK only has two absorption points, and it doesn't look like a Maximum Garuda silhouette either. I believe that it's the new Bey's actual silhouette, which I believe is Garuda's evolution. Cannot comment on the other silhouettes.

Took another look at the pictures, and here is what I can conclude
CZ-1 looks nothing like Inferno Ifrit and looks more like a Valkyrie shape.
CZ-2 I can probably see Jormangand in that, but some parts look more like parts of Spriggan's axes
Turn E is too four sided to be an Evil-Eye silhouette, which is three sided.
CZ-3 doesn't look like any of the previously released Beys either. It's shape is not recognizable.
To me it's just really unlikely Garuda would have an evolution. It's likely an original beyblade.
(Jul. 13, 2018  1:41 AM)BeyCrafter Wrote:
(Jul. 13, 2018  12:51 AM)Frostic Fox Wrote: CitrusNinja3 made some notes on the silhouette similarities already. They may all be fillers of previous beys.

The Turn K silhouette definitely doesn't look like Hazard Kerbeus since hK only has two absorption points, and it doesn't look like a Maximum Garuda silhouette either. I believe that it's the new Bey's actual silhouette, which I believe is Garuda's evolution. Cannot comment on the other silhouettes.

Took another look at the pictures, and here is what I can conclude
CZ-1 looks nothing like Inferno Ifrit and looks more like a Valkyrie shape.
CZ-2 I can probably see Jormangand in that, but some parts look more like parts of Spriggan's axes
Turn E is too four sided to be an Evil-Eye silhouette, which is three sided.
CZ-3 doesn't look like any of the previously released Beys either. It's shape is not recognizable.

I see that now, but the low-res pictures that were available when I said that didn't do these beys any justice.

(Jul. 13, 2018  1:37 AM)CitrusNinja3 Wrote: The weird thing is that we haven't seen Xtreme Prime. The combo picture for Yami-Terios has the normal Xtreme. Something is fishy here...

In the Yami-Terios thread, I was informed that the spring inside the Driver is stronger than normal due to being thicker, either from being naturally thicker or just being coated in gold paint. this is probably how all Prime Drivers will be, if any others are made
Now that we now about Shadow αmaterios being changed to Yami-Terios, what do you guys think Shining αmaterios will be called? Hikari-Terios? (Light-Terios is Japanese) Yoi-Terios? (Good-Terios) Kami-Terios? (God-Terios)
Pretty much anything about light goes!