This Thread is For discussing what types of parts we want to come to Beyblade (all series) or what gimmicks those parts may have (feel free to enter your own custom parts!)

Early Battle Strikers had a free spinning flat tip. I'd be curious to see that in action in beyblade.

Early Battle Strikers had a free spinning flat tip. I'd be curious to see that in action in beyblade.

Sounds Awesome! This could possibly be a part of a new meta if it comes to reality!

F230 CF was considered gamebreaking by many but the C was an important factor. I'm not actually sure how a simpler free flat would work and Strikers give very little indication due to the parts being fairly tight.

Another free moving part I'd like to see is the Q tip. One half flat or ball shaped to get it moving and the other perfectly crafted to match the slope of the stadium halfway up, effectively locking the bey at that height if my theory is correct.

i would like to see a free spining,bearing suported metal flat like that of driger f and also a bearing supported performence tip with a metal tip whose shape is  like revolve but the inner sharp tip would be metal and would be free spining while the outer ring  would be sationary and made of plastic or pom or inshort a metal ver of ewd but with nsk shield bearings

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

Is that what Driger F was supposed to do? It looked to me more like some kind of suspension system.

A shallower Edge driver that actually makes use of the cross shape to self right and maintain balance would be nice but, after that, we get into things from my own bey ideas:
-A trapped metal ball inside a hollow flat tip, free to slide up and down to essentially form a metal version of Forbidden Ionis' tip where the ball would remain in place when lifted to help deaden any upper attack against the bey. Designed for a HMS idea competition.
-Four flat tips in a square to produce a wildly aggressive bey able to push off from the tornado ridge and jerk inwards to attack. Thought up for a spider bey.
-A core with enough airflow to suction a metal ball upwards but drop it back down as the bey slows to help maintain balance for as long as possible. Envisioned as the track of a squirrel-themed MFB idea.

Is that what Driger F was supposed to do? It looked to me more like some kind of suspension system.

A shallower Edge driver that actually makes use of the cross shape to self right and maintain balance would be nice but, after that, we get into things from my own bey ideas:
-A trapped metal ball inside a hollow flat tip, free to slide up and down to essentially form a metal version of Forbidden Ionis' tip where the ball would remain in place when lifted to help deaden any upper attack against the bey. Designed for a HMS idea competition.
-Four flat tips in a square to produce a wildly aggressive bey able to push off from the tornado ridge and jerk inwards to attack. Thought up for a spider bey.
-A core with enough airflow to suction a metal ball upwards but drop it back down as the bey slows to help maintain balance for as long as possible. Envisioned as the track of a squirrel-themed MFB idea.

Driger F was a full auto clutch. The free spin top was locked until halfway through, then the clutch released and the flat became free spinning.

---

Spoiler (Click to View)

Kai-V is an omniscient being who imparts starving mortals such as ourselves with the morsels of Beyblade foreknowledge we so unknowingly desired. She does so not out of grace, but because it pleases her. May the great Kai-V excuse your insolence and show mercy upon your blader spirit.

Beymen.

Evil is very bad though... There is just nothing good to do with it.

They do not, because clearly you punch them with these brass knuckles.

Imagine a tip that can be like move but metal, so you can switch between jumping and metal flat

---

Is that what Driger F was supposed to do? It looked to me more like some kind of suspension system.

A shallower Edge driver that actually makes use of the cross shape to self right and maintain balance would be nice but, after that, we get into things from my own bey ideas:
-A trapped metal ball inside a hollow flat tip, free to slide up and down to essentially form a metal version of Forbidden Ionis' tip where the ball would remain in place when lifted to help deaden any upper attack against the bey. Designed for a HMS idea competition.
-Four flat tips in a square to produce a wildly aggressive bey able to push off from the tornado ridge and jerk inwards to attack. Thought up for a spider bey.
-A core with enough airflow to suction a metal ball upwards but drop it back down as the bey slows to help maintain balance for as long as possible. Envisioned as the track of a squirrel-themed MFB idea.

I don't understand the second one but I like the others

---

ex-spinny top master

I made a driver called Speed by putting the metal part of a pencil onto Merge...

---

The one... The only...  Blader ZK7!                     
Just a kid who happens to be a blader.

(Thought of the week: Inferno Ifrit is the most underrated layer of all time...)
 
 Inferno Ifrit 7M Iron

Legend Spriggan Gravity Xtreme

Drain Fafnir 7G Planet

Please use the existing thread for this topic: https://worldbeyblade.org/Thread-Beyblad...-come-true

---

Spoiler (Click to View)

This is what we all want, Brad.