Hey, I just noticed that's you with a new picture (Off Topic)

I put Rubber on my Storm Wheel, and now it's like a left spinning Meteo. I'll show you a pic soon

PHAIL

Night is just like Chuck Norris, he never phails.

I used a huge screw to make Earth Poison Storm Storm Rock Flame Lightning Aquila DF145SD

I made Rock Storm Rock Rock Pegasis 100RF.
I have way to many Rocks.
Rocks rock.

---

Once, I rubbed a RF against the floor and shaped RD. I think I lost it, but it should have been pretty good at Defense.

---

Check out my NEW story! http://worldbeyblade.org/Thread-Mr-N-s-N...lade-Story
I make idiotic posts sometimes, and I apologize for any of them. I'm still trying to be a more constructive poster. Feel free to correct me with any of my posts through PM or in the thread if it's not off-topic.
Please keep in mind when reading my posts that I know little to nothing about the current metagame and Zero-G.

[Image: 2011-04-1612-34-25062.jpg]
lolz the other day i was bored so i grabbed one of those friction pens,
grabbed the rubber
[Image: 2011-04-1612-34-34421.jpg]
pushed out the rubber flat out of the casing part and stuck it in
[Image: 2011-04-1612-34-58812.jpg]
it doesn't fit on 100 tracks but fits on anything above 145 ( rubber inside is long, unless i cut )
[Image: 2011-04-1612-35-53187.jpg]
[Image: 2011-04-1612-35-58375.jpg]
[Image: 2011-04-1612-36-07953.jpg]

soon I am going to make an electronic launcher with a battle striker launcher and a beyblade launcher, good so my blade can spin at 300RPM!!! as this fourm says, it is ILLEGAL

---

I made whf by shredding off the end of hf and making it wider

---

Signature was too based. Read the rules.

300rpm isn't as fast as a Hasbro Light Launcher...

---

Get an account on http://beyblade.wikia.com/wiki/! It may be inaccurate, but that's why we need you! The most-knowing beyblade community, the WBO! Please, help stop the hate of the WBO over Beyblade Wiki! We are aiming to get the most beyblade info we can!

Quotes: (Click to View)

Benkei should be a beyblade, wearing a tutu to spin. And the facebolt: his hat.

I nicknamed my Hasbro Gasher Energy Ring "Cancer Clear Wheel".

aint basalt that thing you put in your bath or something!

I think that's called Bath Salt

soon I am going to make an electronic launcher with a battle striker launcher and a beyblade launcher, good so my blade can spin at 300RPM!!! as this fourm says, it is ILLEGAL

---

I made whf by shredding off the end of hf and making it wider

LOLS 300 IS LIKE not even the spin of the normal hasbro launcher its less lol

3000 is also slower than a Hasbro light launcher, if that is what you meant to say.

---

"In many ways, the work of a critic is easy. We risk very little, yet enjoy a position over those who offer up their work and their selves to our judgment. We thrive on negative criticism, which is fun to write and to read. But the bitter truth we critics must face, is that in the grand scheme of things, the average piece of junk is probably more meaningful than our criticism designating it so. But there are times when a critic truly risks something, and that is in the discovery and defense of the new. The world is often unkind to new talent, new creations. The new needs friends. Last night, I experienced something new: an extraordinary meal from a singularly unexpected source. To say that both the meal and its maker have challenged my preconceptions about fine cooking is a gross understatement. They have rocked me to my core. In the past, I have made no secret of my disdain for Chef Gusteau's famous motto, "Anyone can cook." But I realize, only now do I truly understand what he meant. Not everyone can become a great artist; but a great artist can come from anywhere."

-Anton Ego/Peter O'Toole (1932-2013)

yeah mabye the yo-yo launcher I am making will do better(probably not), going to upload the blue prints soon.

---

Signature was too based. Read the rules.

i made a simular Bey like the one from picture 5 thats in the middle

---

How do you make a bearing bottom?

hey i m trying to create metal fs tip and nearly created it and going to post it's pic shortly

---

sig by me

Hey guys! I'm building a custom beystadium using hardening clay, resin and a plastic dish. Id like the stadium to be "Attack" type. I was wondering if someone could give me the dimensions of a basic attack type stadium. I need measurements for:

The bowl
The "walls"
and the dimensions of the stadium itself. I intend to make it approximately the same size.

Any help would be great!

It's about 10 Degree slope in the "bowl", you can make a the walls 2-3 inches tall, the area of play is about 8 inches in diameter.

---

Spoiler (Click to View)

I am disgustingly Lazy. :/

What is Google ? Who am I ? What is this world ...

R.I.P.
Logic

Learn to aim.

Do I need to spell it out to you? W-e d-o-n-t c-a-r-e

I have ADD and ADHD so that means I have great random ideas and thoughts!!!!

Thanks SDamonCronous for this BEASTLY signature!!

There was a stadium for HMS that was called "Tornado Type S". There's a small ridge that "accelerates" a Beyblade when it latches onto it.

http://www.youtube.com/watch?v=XhmnmQDpY1E

---

OHMYGODBUGTURTLESISBACKYEAH.

But anyways, what about the texture of the stadium floor? How will you get it to be as smooth as PVC plastic?

---

"In many ways, the work of a critic is easy. We risk very little, yet enjoy a position over those who offer up their work and their selves to our judgment. We thrive on negative criticism, which is fun to write and to read. But the bitter truth we critics must face, is that in the grand scheme of things, the average piece of junk is probably more meaningful than our criticism designating it so. But there are times when a critic truly risks something, and that is in the discovery and defense of the new. The world is often unkind to new talent, new creations. The new needs friends. Last night, I experienced something new: an extraordinary meal from a singularly unexpected source. To say that both the meal and its maker have challenged my preconceptions about fine cooking is a gross understatement. They have rocked me to my core. In the past, I have made no secret of my disdain for Chef Gusteau's famous motto, "Anyone can cook." But I realize, only now do I truly understand what he meant. Not everyone can become a great artist; but a great artist can come from anywhere."

-Anton Ego/Peter O'Toole (1932-2013)

OMG I never say a launcher had a very long string before! How did you get it?!

You can actually smooth clay to the point that you can nearly slide things on it. It is not super duper smooth like plastic, but it is very similar. You can do this through rubbing somewhat dried clay with a smooth metal surface, like the handle of a X-Acto knife (burnishing technique).

It would be interesting if the entire stadium was made of burnished clay; the Beyblade can engrave it's path into the stadium and probably become miniature "Tornado Ridges"..

Please do be careful with resin (fiberglass kind)! I'm dealing with it right now and it is quite poisonous and carcinogenic, so be sure to wear a proper respirator!

---

-Headdesk- HE MADE IT. That's why this thread is called ILLEGAL stuff discussion. It's not ALLOWED.

---

"In many ways, the work of a critic is easy. We risk very little, yet enjoy a position over those who offer up their work and their selves to our judgment. We thrive on negative criticism, which is fun to write and to read. But the bitter truth we critics must face, is that in the grand scheme of things, the average piece of junk is probably more meaningful than our criticism designating it so. But there are times when a critic truly risks something, and that is in the discovery and defense of the new. The world is often unkind to new talent, new creations. The new needs friends. Last night, I experienced something new: an extraordinary meal from a singularly unexpected source. To say that both the meal and its maker have challenged my preconceptions about fine cooking is a gross understatement. They have rocked me to my core. In the past, I have made no secret of my disdain for Chef Gusteau's famous motto, "Anyone can cook." But I realize, only now do I truly understand what he meant. Not everyone can become a great artist; but a great artist can come from anywhere."

-Anton Ego/Peter O'Toole (1932-2013)

It's about 10 Degree slope in the "bowl", you can make a the walls 2-3 inches tall, the area of play is about 8 inches in diameter.

Perfect thanks alot!


As for the question about the texture, thats where the resin comes in, Combining that with a polystyrene/fiberglass solution should work perfectly for simulating the plastic of an official beystadium. If it fails it should be no problem to simply coat it in a thin layer of wax or a cocking solution.

If fiberglassing does not work, you could always try vacuum-forming.

---

If fiberglassing does not work, you could always try vacuum-forming.

Thanks for the tip! Hoping this will take about a week! Pics to follow wether or not this whole idea works out in the end!

the stadium is almost complete!

[img=http://www4.picturepush.com/photo/a/5531287/220/5531287.jpg]

what do you think?

Wow. Made from Scratch that is Awesome!

It looks a bit like a balance stadium. And teh Walls need to be a bit Wider but that is Downright AWESOME!

---

Credit to Omega.
UniquE - Professional Beyblade team located in Melbourne.

Spoiler (Click to View)

Looks a bit blocky and rough, but that is amazing anyways!

---

"In many ways, the work of a critic is easy. We risk very little, yet enjoy a position over those who offer up their work and their selves to our judgment. We thrive on negative criticism, which is fun to write and to read. But the bitter truth we critics must face, is that in the grand scheme of things, the average piece of junk is probably more meaningful than our criticism designating it so. But there are times when a critic truly risks something, and that is in the discovery and defense of the new. The world is often unkind to new talent, new creations. The new needs friends. Last night, I experienced something new: an extraordinary meal from a singularly unexpected source. To say that both the meal and its maker have challenged my preconceptions about fine cooking is a gross understatement. They have rocked me to my core. In the past, I have made no secret of my disdain for Chef Gusteau's famous motto, "Anyone can cook." But I realize, only now do I truly understand what he meant. Not everyone can become a great artist; but a great artist can come from anywhere."

-Anton Ego/Peter O'Toole (1932-2013)