World Beyblade Organization by Fighting Spirits Inc. Beyblade Discussion Beyblade Products

Hasbro Beyblade Burst - Upcoming Release & Rumor Thread

Dec. 18, 2018  10:04 AM
 
THERE’S SO MUCH MAGIC IN TE MASTER KIT LAUNCHER


Every time I launch the Master Kit Launcher since I only bought it just today, I’m launching Xcalius.F.X, Valtryek V2.B.V and Wonder Valtryek V4.12.Vl (I managed to force Valtryek V4 out of the Epic Rivals Beystadium ring with a flat launch) and every single launch it feels like I didn’t even launch any bey at all.

How does Hasbro do this? Wait, is this the same for TakaraTomy’s Beylaunchers?
Dec. 18, 2018  5:04 PM
 
(Dec. 18, 2018  10:04 AM)IronFace879 Wrote: THERE’S SO MUCH MAGIC IN TE MASTER KIT LAUNCHER


Every time I launch the Master Kit Launcher since I only bought it just today, I’m launching Xcalius.F.X, Valtryek V2.B.V and Wonder Valtryek V4.12.Vl (I managed to force Valtryek V4 out of the Epic Rivals Beystadium ring with a flat launch) and every single launch it feels like I didn’t even launch any bey at all.

How does Hasbro do this? Wait, is this the same for TakaraTomy’s Beylaunchers?

Yeah, the Beylauncher doesn't have any resistance unlike the Beylauncher LR where there is a surprising amount of resistance.
Dec. 19, 2018  5:42 AM
 
Dec. 19, 2018  6:28 AM
 
(Dec. 18, 2018  5:04 PM)BeyCrafter Wrote:
(Dec. 18, 2018  10:04 AM)IronFace879 Wrote: THERE’S SO MUCH MAGIC IN TE MASTER KIT LAUNCHER


Every time I launch the Master Kit Launcher since I only bought it just today, I’m launching Xcalius.F.X, Valtryek V2.B.V and Wonder Valtryek V4.12.Vl (I managed to force Valtryek V4 out of the Epic Rivals Beystadium ring with a flat launch) and every single launch it feels like I didn’t even launch any bey at all.

How does Hasbro do this? Wait, is this the same for TakaraTomy’s Beylaunchers?

Yeah, the Beylauncher doesn't have any resistance unlike the Beylauncher LR where there is a surprising amount of resistance.

The Beylauncher LR has a different gear ratio. It has a heavier pull, but a stronger launch strength by default. The normal Beylaunchers rely on launch strength more than gear ratio.
Dec. 19, 2018  6:51 AM
 
(Dec. 19, 2018  6:28 AM)Dragunix Wrote:
(Dec. 18, 2018  5:04 PM)BeyCrafter Wrote: Yeah, the Beylauncher doesn't have any resistance unlike the Beylauncher LR where there is a surprising amount of resistance.

The Beylauncher LR has a different gear ratio. It has a heavier pull, but a stronger launch strength by default. The normal Beylaunchers rely on launch strength more than gear ratio.

I know, which is why I said vs the Beylauncher LR because it is built different from the regular Beylaunchers just to make the dual-spin work and be able to hold a Beylogger.
Dec. 19, 2018  8:00 AM
 
(Dec. 19, 2018  5:42 AM)originalzankye Wrote:
I know the final solution to Phoenix P4:


Revive Phoenix needs to have a random tab to be installed within the prong insertion area. One short slide is enough to make it even easier for the Revive armor to be removed, and if their ain’t no hidden tab Phoenix goes to the graveyard never to revive.
Dec. 19, 2018  2:26 PM
 
(Dec. 19, 2018  6:51 AM)BeyCrafter Wrote:
(Dec. 19, 2018  6:28 AM)Dragunix Wrote: The Beylauncher LR has a different gear ratio. It has a heavier pull, but a stronger launch strength by default. The normal Beylaunchers rely on launch strength more than gear ratio.

I know, which is why I said vs the Beylauncher LR because it is built different from the regular Beylaunchers just to make the dual-spin work and be able to hold a Beylogger.

My apologies
Dec. 20, 2018  5:19 AM
 
You know, that Hasbro rP should definitely have the gimmick, or at least better have it, if they don't then there's going to be a lot in the anime they'll need to cut out.

Also, those Hasbro exclusives look incredible as always! I love how Dullahan looks, the shape and colour scheme is so appealing, and those silver details where the metal should be? Beautiful. Same goes for Cyclops, that armoured look in that colour appeals to my tastes so much! Vise Leopard looks accurate but I never cared for it too much, though that Destroy looks normal, I wonder how the SS gimmick will work? And Friction doesn't seem to have rubber around it, not even a white tip.

But again, they beg to be in metal! How I wish these were metal!
Dec. 20, 2018  5:38 AM
 
(Dec. 20, 2018  5:19 AM)Jinbee Wrote: You know, that Hasbro rP should definitely have the gimmick, or at least better have it, if they don't then there's going to be a lot in the anime they'll need to cut out.

Also, those Hasbro exclusives look incredible as always! I love how Dullahan looks, the shape and colour scheme is so appealing, and those silver details where the metal should be? Beautiful. Same goes for Cyclops, that armoured look in that colour appeals to my tastes so much! Vise Leopard looks accurate but I never cared for it too much, though that Destroy looks normal, I wonder how the SS gimmick will work? And Friction doesn't seem to have rubber around it, not even a white tip.

But again, they beg to be in metal! How I wish these were metal!

They're not metal to test your mettle.

And your patience.
Dec. 20, 2018  1:37 PM
 
Completely agree with Jinbee. Quality of the Hasbro exclusives are pretty high. I love them all! Completely unique choices design-wise and I hope re-colours are released in the future.

I do wish Hasbro wouldn’t be so quick to write off the value of gimmicks. These layers and their avatars beg for some creativity and uniqueness in that way.
Dec. 20, 2018  9:20 PM
 
Why don't Hasbro spread Beyblade Burst News officially?
Dec. 21, 2018  1:06 AM
 
(Dec. 20, 2018  9:20 PM)marutti Wrote: Why don't Hasbro spread Beyblade Burst News officially?

Because they're not using stuff they have efficiently, like the GenBey newsletter. They could be giving us ideas of when to expect certain releases with it, yet they don't.
Dec. 22, 2018  7:58 AM
 
Credits to this amazing beytuber,  Boring Blader! Check him out guys and help him reach 1k subscribers! 
The new Hasbro beys looks really cool, I personally love the new Amaterios A3.
Dec. 22, 2018  2:10 PM
 
(Sep. 04, 2018  7:40 AM)ToxicAtom Wrote: Unless they did a really good paintjob (which I doubt), it appears hasbro Cho-Z layers have no metal on them. That'll be a pretty big revelation if it's true. We might have another Metal Fight 4D scenario going on here.


Just want to say I called it
Dec. 22, 2018  3:21 PM
 
Based off the leaked photos, the gimmick for rP is gone.

Woo.
Dec. 22, 2018  3:23 PM
 
(Dec. 22, 2018  3:21 PM)KinkoUsagi Wrote: Based off the leaked photos, the gimmick for rP is gone.

Woo.

Really? Interesting. Which images?

If this is true then the anime will need to cut A LOT of parts out to avoid showing the armour off, unless they get too lazy or run low on money to edit it.
Dec. 22, 2018  4:01 PM
 
Watch the first video in Triumph's post (Hasbro New Images) above, Jinbee
Dec. 22, 2018  4:16 PM
 
Looks like they got Orichalcum right. I'll definitely buy it. Not planning on buying any turbo since there's no metal but I will get any new Hasbro exclusives, since they never existed in the first place, metal or not. I don't know if I'll get Shining Amaterios because of the lack of metal... Maybe I'll get it for the other parts. My favorite Hasbro exclusives so far are Dullahan, Sphinx, and Kraken. Not a big fan of Cyclops, Ogre, or Typhon. Ogre would probably be the best looking out of those.
Dec. 22, 2018  7:19 PM
 
Today I found the new dark blue stadium with the extra rail thing or whatever it is at target, seems pretty cool. Got the new hasbro valtryek cause the driver was the only other one I really wanted.
Dec. 22, 2018  8:22 PM
 
(Dec. 22, 2018  4:01 PM)KinkoUsagi Wrote: Watch the first video in Triumph's post (Hasbro New Images) above, Jinbee

Ok, we see Phoenix, but it's not enough to even tell if it still has the revive armor gimmick or not. We need MORE than just an image that doesn't show or explain any lack of gimmicks.
Dec. 22, 2018  9:16 PM
 
I have to agree with Beycrafter here: the picture really doesn't show enough to prove that. I can still very clearly see the slots where the armor slides into, and although I'm not seeing the white plastic trigger for it, it's altogether possible that Hasbro worked around that and made it a clip-on extra or something and completely ignore the main layer's burst damage.

Until its released or actual hard evidence is shown to prove it, it's probably better not to assume that it will or won't work. We just don't have any realistic way of knowing that, and I don't think any pictures will ever do that justice.
Dec. 22, 2018  10:15 PM
 
Hasbro Orichalcum? I’ll be interested to get my hands on that one. Appears to be a turbo starter for wave 2. Meanwhile in Australia, Target may or may not have the rail rush battle set.
Dec. 23, 2018  2:58 AM
 
Here’s the store where Boring Blader got his stuff from if anybody is interested.

https://shopee.vn/Con-quay-Beyblade-burs...1768654262
Dec. 23, 2018  3:02 AM
 
Quite strange. Dead Phoenix comes out in January in Takara Tomy’s Chouzetsu, but Hasbro named Revive Phoenix Phoenix P4, meaning there cannot be a second Phoenix unless Hasbro changes their mind last second, of release it in the next toy line. Plus, 120% metal isn’t Hasbro’s thing really.
Dec. 23, 2018  5:56 PM
 
(Dec. 22, 2018  3:23 PM)Jinbee Wrote:
(Dec. 22, 2018  3:21 PM)KinkoUsagi Wrote: Based off the leaked photos, the gimmick for rP is gone.

Woo.

Really? Interesting. Which images?

If this is true then the anime will need to cut A LOT of parts out to avoid showing the armour off, unless they get too lazy or run low on money to edit it.

The episode where we see Revive Phoenix's gimmick in action for the first time (episode 15) already aired on Teletoon and there wasn't any cut at all.
Prev
Page 171
Next