Face Contest: Design a Zero-G Cerberus Beyblade!

nice work Benjohadi, I was going to layout my drawing just like that, but brilliant shading.
As promised at the start of the competition , I have now drawn mine.
As you can see, i'm not the worlds best drawer. :L
george: The quality of the picture itself is fine but the digicode isn't close up enough to be readable without zooming, making it all fuzzy.
(Dec. 16, 2012  10:01 PM)Dracomageat Wrote: george: The quality of the picture itself is fine but the digicode isn't close up enough to be readable without zooming, making it all fuzzy.

the digicode?it on the pad lock...haha..not a real digicode..."inspired" by digicode actually..

haha..i'm glad you guys liked it...thanks guy... Confused
That would explain the illegibility then. Thanks for the clarification and, as I'm sure I said before, great work.
Here is my entry.Don't laugh this is my first time.
http://i1301.photobucket.com/albums/ag11...90f61d.jpg
I hope it is not a problem i could not make an id on an uploading site ,so i used darkbull9999's id.
Here is my entry!
http://i1301.photobucket.com/albums/ag11...b5c4f5.jpg
Here is my entry (I tried my best!) :
Beserker Kerberus HC170R3F

Stone Face: Kerberus
http://img254.imageshack.us/img254/8458/img0961wr.jpg

The Face depicts the Guardian of Hell, the three - headed Cerberus.

Chrome Wheel : Kerberus
http://img163.imageshack.us/img163/3310/img0962tx.jpg

The Wheel Depicts The Guardian Of Hell, Cerberus. It has featured designs like the chains and the fangs.It is a Chrome Wheel which Has the three heads partially sticking out.

Crystal Wheel : Beserker
http://img703.imageshack.us/img703/5012/img0963ma.jpg

The Berserker Crystal Wheel is a gun-metal black with quite an interesting design. Shown as a flail, with the Beyblade symbol for Earth, the chains lining to a piece of armor where a hollow version of a flail is also seen. More chains lead to an armor part that comes back to the original flail.

Track: Hell Change 170
http://img571.imageshack.us/img571/4383/img0964dv.jpg

This track is similar to BD145 and E230 because of the disk. This track allows the change of 3 heights, 230,200,170,145. It exceeds the circumference of most wheels in diameter.

Tip: R3F (Right Rubber Ring Flat)
http://img35.imageshack.us/img35/668/img0965sl.jpg

This is in the Evolution line of the Rubber Flats. It is shaped like a diamond which allows more speed and which can easily make the user to bank the beyblade.

Hope you guys like it!
(Dec. 18, 2012  12:18 PM)darkbull9999 Wrote: Here is my entry.Don't laugh this is my first time.
http://i1301.photobucket.com/albums/ag11...90f61d.jpg

Unfortunately, it looks like what you designed is a Metal Wheel, not a Chrome Wheel ... As such, you are probably disqualified. It would help if the image was clearer.
(Dec. 18, 2012  1:22 PM)Blader Phantom Wrote: Tip: R3F (Right Rubber Ring Flat)
http://img35.imageshack.us/img35/668/img0965sl.jpg

This is in the Evolution line of the Rubber Flats. It is shaped like a diamond which allows more speed and which can easily make the user to bank the beyblade.

Hope you guys like it!

The rest of your entry was awesome too (especially the stone face), but of all the parts of your design the tip was my favorite! You did a great job with this design; I love the idea of a diamond shaped rubber tip, and I liked how the ring allows the tip to be called R3F. I especially liked the side view, since it showed that the ring was somewhat small which is good. It looks really balanced, and you did really well drawing that. Grin

EDIT: oh crud, you did forget the gear part the tool is supposed to attach to, which is a shame since it is such a cool design 3:
I've got my entry i'd like to submit, but ican't find a way to upload the photos onto my post....It's from an SD Card from my camera :L someone help
(Dec. 18, 2012  11:05 PM)Herculeo777 Wrote: I've got my entry i'd like to submit, but ican't find a way to upload the photos onto my post....It's from an SD Card from my camera :L someone help

You need to transfer the picture into your computer, then you use a site like ImageShack.us to upload the image on Internet. You post the direct URL they give you here, after that.
Alright, thanks Kai-V Smile Just uploading them now Grin
http://imageshack.us/g/1/9925647/

This is my entry for the design a Zero-G Burning Kerberous contest. Here are some little things i have to say about each part......

Burning Kerberous TS115WRB Balance

Stone Face: Kerberous: It is made to show pure detail of the 3 herds in a cerberous. It shows an abbreviation of Kerberous in the from of KBRS.

Chrome Wheel: Burning: The chrome wheel's contact points are high and low on the wheel, to try and help the bey deal with higher combos, like 230 combos, and the parts that are lower that help to deal with lower beys. The longest part of the wheel represents Kerberous' body. The body slopes upwars, giving it some destabilizing or Upper Attack ability. After that is a horn of Kerberous, which has lines on it which are the to suggest that it has barrage attack on the horns, similar to the Lightning Metal Wheel. After this is the head, which curves inwards to give some sort of defense capabilty. The inner design of the wheel shows fragments of chains, which I used to show it's freedom from being sealed away Tongue_out

Crystal Wheel: Kerberous: The crystal wheel is in an unbalanced design, to give it some aggresiveness, similar to the Twisted/Basalt Metal Wheel. On one side is some some green chains, which green gives breath to it's design, suggesting some kind of energy. After that are two heads of the Kerberous, which are in purple, and kind of hazy, giving it the look as if it's moving fast. After each of those heads comes a fireball design, giving the impression as if the Kerberous shot fire out it's mouth. The inner design of the wheel is equally balanced however. The horns and chains are parallel to each other, which gives it some balance. The horns are just there to add to the design, and why the chain are here are explained above.

Spin Track: TS115: The track is a changing height track, like CH120. 115 is included to try oppose 120 by making it high for attack types, but slightly lower to try and outclass CH120. 140 kind of has the same concept, making it slightly lower to reduce chances of destabilization. The regular 165 track is included as well, so I can be used better for versatility, so you have access to 3 tracks, instead of one, and also it's there as the 160 height seems to be used in a lot of combos. The picture is shown in 165 height.

Performance Tip: WRB (Wide Rubber Ball) A part made to try and maximize friction between the stadium and the tip, creating quite a solid defense. But as all rubber tips do, it has less stamina than that of WB (Wide Ball) and MB (Metal Ball). Because more friction is made, the tip also moves a lot, so it's can be used in defense combos to try and hit stamina types hard, and stand up to attack types. This gives the bey some kind of a balanced movement, movement for attack, and rubber and the friction for defense.
(Dec. 18, 2012  6:52 PM)Ingulit Wrote:
(Dec. 18, 2012  1:22 PM)Blader Phantom Wrote: Tip: R3F (Right Rubber Ring Flat)
http://img35.imageshack.us/img35/668/img0965sl.jpg

This is in the Evolution line of the Rubber Flats. It is shaped like a diamond which allows more speed and which can easily make the user to bank the beyblade.

Hope you guys like it!

The rest of your entry was awesome too (especially the stone face), but of all the parts of your design the tip was my favorite! You did a great job with this design; I love the idea of a diamond shaped rubber tip, and I liked how the ring allows the tip to be called R3F. I especially liked the side view, since it showed that the ring was somewhat small which is good. It looks really balanced, and you did really well drawing that. Grin

EDIT: oh crud, you did forget the gear part the tool is supposed to attach to, which is a shame since it is such a cool design 3:

Thanks Inguilt! But I have one question. I cannot specify what you mean by the where the tool is attached to. Can't I do a remake?
The area in which the tool attaches to the tip.

And no, the first one you did is what they will judge on.
Umm, Inguilt it is right there on the top, haha. I think you got cpnfused in that part. It is not a ring.
(Dec. 19, 2012  11:18 AM)Blader Phantom Wrote: Umm, Inguilt it is right there on the top, haha. I think you got cpnfused in that part. It is not a ring.

He is talking about how on every tip, where it attaches to the track, there are notches that allow the tool to grab onto the tip for when you tighten it. These notches make the top of every tip slightly resemble a gear. The top of your tip is smooth without notches for the tool to grab onto. Either way, its still a great entry.
Stone face
http://imageshack.us/g/1/9933811/
Around spike: picture wont load but imagine circle flat with spikes.
I feel like I could lose a finger by touching that in an arena. It's a good entry, but it wouldn't meet the safety standards of TT.
(Dec. 18, 2012  1:22 PM)Blader Phantom Wrote: Tip: R3F (Right Rubber Ring Flat)

While I love your entry, I do not feel this name is apt. There is neither a CF style ring nor any directionality to the tip. From how you have described it, DRF (Diamond Rubber Flat) might be more suitable.
Alright, here goes.
BEHOLD!

Notes:
-The gaps between the chains on the Chrome Wheel are intended to be holes.
- It is a Fire Element.
- Alternate names for T230 were AC230 (Auto Change) and R230 (Retract).
OK, this is crunch time.

procrastination is king
ginga Hey, there's one good thing in waiting... There's less surprises.
Hyoma


... That said, I'm still struggling to be actually HAPPY with my wheels =/
(Dec. 20, 2012  2:08 AM)blade2113 Wrote: Stone face
http://imageshack.us/v_images.php
Around spike: picture wont load but imagine circle flat with spikes.

You linked to a general page, we do not see any particular pictures there.