Can the outer part of the Launcher Grip be removed, allowing from customization?

---

:iceburn: formerly #1Beybladefan

Awesome sig thx to DeltaFate, NaLu, and Blaze12xz.

Yup. I removed the red grips from the grip you get in the attack set with Spriggan, Deathscyther and Miniboros, and put them on the original release white grip.

Can some one host a tournament around Fresno or Clovis area pls

Can some one host a tournament around Fresno or Clovis area pls

WBO tournaments are fan run which means it's up to the people on the area to host one if you want a tournament that bad grab at least three other people and propose an event

---

This has probably been asked millions of times but since I returned after a while out I've forgotten, can anyone tell me how to use spoilers on the site. It used to be like this

Spoiler (Click to View)

hi

From what I remember but my HTML is bad so help out plez. 

P.s. Never mind it worked through html still.

---

My instagram @yb_one_

This has probably been asked millions of times but since I returned after a while out I've forgotten, can anyone tell me how to use spoilers on the site. It used to be like this

Spoiler (Click to View)

hi

From what I remember but my HTML is bad so help out plez. 

P.s. Never mind it worked through html still.

That is not HTML hah. HTML uses < >. That is BBcode.

That is not HTML hah. HTML uses < >. That is BBcode.

It's somewhat similar to HTML to me, not sure why but u are right xD.

---

My instagram @yb_one_

Yup. I removed the red grips from the grip you get in the attack set with Spriggan, Deathscyther and Miniboros, and put them on the original release white grip.

Cool, I'd like to make a grip be black with red grips. Are there any LG's with red grips? I know the VS Set with Victory Valkerie, Storm Spriggan, and the BeyStadium comes with a red core grip. (Alternatively, is there a LG with black grips? I LOOOOVE Red and Black!!!)

---

:iceburn: formerly #1Beybladefan

Awesome sig thx to DeltaFate, NaLu, and Blaze12xz.

How do you access the beymap

Are custom painted Layers, Launchers, and Grips allowed for tournament use?

---

|My Youtube|WBBA Profile|

How do you access the beymap

I already answered you, it is litterally the first post of this page. I even quoted you, so you received a notification that someone, me, had replied to you. This is turning into SPAM.

Are custom painted Layers, Launchers, and Grips allowed for tournament use?

Yes.

It didn't come up sorry

Why doesn't Hasbro Drivers work well with Takara Layers and Takara Drivers don't work at all with Hasbro Layers? They look exactly the same!

---

:iceburn: formerly #1Beybladefan

Awesome sig thx to DeltaFate, NaLu, and Blaze12xz.

Why doesn't Hasbro Drivers work well with Takara Layers and Takara Drivers don't work at all with Hasbro Layers? They look exactly the same!

I ain't got any burst beys myself. But from what I heard the takara system got teeth but the hasbro one doesn't so I believe that may be the main reason why. Also in most videos I noticed the hasbro ones are harder to burst somehow despite having no teeth which somewhat surprises me.

---

My instagram @yb_one_

I ain't got any burst beys myself. But from what I heard the takara system got teeth but the hasbro one doesn't so I believe that may be the main reason why. Also in most videos I noticed the hasbro ones are harder to burst somehow despite having no teeth which somewhat surprises me.

The Drivers look the same. I'm confused as to why they are interchangeable.

---

:iceburn: formerly #1Beybladefan

Awesome sig thx to DeltaFate, NaLu, and Blaze12xz.

The Drivers look the same. I'm confused as to why they are interchangeable.

It's all in the layers
the Hasbro layers have no teeth but slopes and the TT layers have teeth

---

The Drivers look the same. I'm confused as to why they are interchangeable.

I'm assuming and this is only an assumption but to hold a bey with no teeth together, maybe the hasbro driver is more compact and tight so it maybe harder to burst a tt bey with teeth on the hasbro beys driver. (I call the bottom bit the driver, hope I'm right)

---

My instagram @yb_one_

It's all in the layers
the Hasbro layers have no teeth but slopes and the TT layers have teeth

I know that, but both Drivers are built the same.

---

:iceburn: formerly #1Beybladefan

Awesome sig thx to DeltaFate, NaLu, and Blaze12xz.

I know that, but both Drivers are built the same.

I think Hasbro drivers have smaller tabs

---

I know that, but both Drivers are built the same.

Actually, the Hasbro ones have taller driver "tabs" (the white things), so they can fit on the slopes.

(Or was it vice versa?)

---

Spoiler (Click to View)

Kai-V is an omniscient being who imparts starving mortals such as ourselves with the morsels of Beyblade foreknowledge we so unknowingly desired. She does so not out of grace, but because it pleases her. May the great Kai-V excuse your insolence and show mercy upon your blader spirit.

Beymen.

Evil is very bad though... There is just nothing good to do with it.

They do not, because clearly you punch them with these brass knuckles.

Actually, the reason for the cross brand incompatibility is due to Hasbro's slope mechanism being thicker than Takara-Tomy's teeth system. Hasbro's Drivers compensate for this by allowing their white plastic parts covering their springs to be pushed down further than those in Takara-Tomy's Drivers.

[Image: xw0CmSY.jpg]

That is why Takara-Tomy's Layers are loose on Hasbro Drivers and Hasbro's Layers are tight on Takara-Tomy's Drivers. It also explains why those little plastic "boxes" exist on the sides of Hasbro's Drivers: to cover up those little white tabs from the side when they go even lower.

---

Spoiler (Click to View)

This is what we all want, Brad.

Actually, the reason for the cross brand incompatibility is due to Hasbro's slope mechanism being thicker than Takara-Tomy's teeth system. Hasbro's Drivers compensate for this by allowing their white plastic parts covering their springs to be pushed down further than those in Takara-Tomy's Drivers.

[Image: xw0CmSY.jpg]

That is why Takara-Tomy's Layers are loose on Hasbro Drivers and Hasbro's Layers are tight on Takara-Tomy's Drivers. It also explains why those little plastic "boxes" exist on the sides of Hasbro's Drivers: to cover up those little white tabs from the side when they go even lower.

Still a bit confused, but thanks a lot.

---

:iceburn: formerly #1Beybladefan

Awesome sig thx to DeltaFate, NaLu, and Blaze12xz.

Actually, the reason for the cross brand incompatibility is due to Hasbro's slope mechanism being thicker than Takara-Tomy's teeth system. Hasbro's Drivers compensate for this by allowing their white plastic parts covering their springs to be pushed down further than those in Takara-Tomy's Drivers.

[Image: xw0CmSY.jpg]

That is why Takara-Tomy's Layers are loose on Hasbro Drivers and Hasbro's Layers are tight on Takara-Tomy's Drivers. It also explains why those little plastic "boxes" exist on the sides of Hasbro's Drivers: to cover up those little white tabs from the side when they go even lower.

Also is that a Dark Deathscyther and Hasbro Valkerie? And what Drivers are those?

---

:iceburn: formerly #1Beybladefan

Awesome sig thx to DeltaFate, NaLu, and Blaze12xz.

Someone Explain to me the concept of types within types.
Example, mobile defense, burst attack
What are they all in burst and what do they mean?

---

What is the best driver for defense, both for mobile and stationary?
Why does the defense driver work so well with layers like O, D, and D2, even more so than revolve?
Why is D2 so hard to burst, is it because of the shape or the teeth, or both?

---

please, someone sell me gabriel g :'(
i need a hasbro white gabriel g, i'll even buy a broken one.
image below.
buying thread