[3D Printing]  Maiden testing/discussion

(Oct. 30, 2020  2:30 PM)BladerUmarWBO Wrote:
(Oct. 30, 2020  2:29 PM)kai edits Wrote: Guardian maiden 1s sting atomic or xtend plus or maybe zeta dash once I find it.

ok

(Oct. 30, 2020  2:23 PM)kai edits Wrote: I am gonna break genesis with my bare hands of I have too lol. I want maiden to be perfect so I can break genesis.

im gonna try to make maiden guardian
It's a defense type by the way. And post the file here so everyone can see it.
(Oct. 30, 2020  2:34 PM)kai edits Wrote:
(Oct. 30, 2020  2:30 PM)BladerUmarWBO Wrote: ok


im gonna try to make maiden guardian
It's a defense type by the way. And post the file here so everyone can see it.
YUP so do u want me to make the parts 3d too or u already have the chassis metal and driver     and any metal or rubber on layer

and im using copy of right layer to make it okQ
(Oct. 30, 2020  2:35 PM)BladerUmarWBO Wrote:
(Oct. 30, 2020  2:34 PM)kai edits Wrote: It's a defense type by the way. And post the file here so everyone can see it.
YUP so do u want me to make the parts 3d too or u already have the chassis metal and driver     and any metal or rubber on layer

and im using copy of right layer to make it okQ

There is some rubber on maiden so it can spin steal. Maiden is right spin but i dont mind if it's left spin.
(Oct. 30, 2020  2:37 PM)kai edits Wrote:
(Oct. 30, 2020  2:35 PM)BladerUmarWBO Wrote: YUP so do u want me to make the parts 3d too or u already have the chassis metal and driver     and any metal or rubber on layer

and im using copy of right layer to make it okQ

There is some rubber on maiden so it can spin steal. Maiden is right spin but i dont mind if it's left spin.
ik and sparking bey or what
(Oct. 30, 2020  2:38 PM)BladerUmarWBO Wrote:
(Oct. 30, 2020  2:37 PM)kai edits Wrote: There is some rubber on maiden so it can spin steal. Maiden is right spin but i dont mind if it's left spin.
ik and sparking bey or what

Sparking please.
(Oct. 30, 2020  2:39 PM)kai edits Wrote:
(Oct. 30, 2020  2:38 PM)BladerUmarWBO Wrote: ik and sparking bey or what

Sparking please.
do you happen to have a 3d right spin sparking layer i cant find it or can you find it for me
(Oct. 30, 2020  2:39 PM)kai edits Wrote:
(Oct. 30, 2020  2:38 PM)BladerUmarWBO Wrote: ik and sparking bey or what

Sparking please.

I think I can design a maiden. (I'm still an aprentice in tinkercad) Do you want the rubber to be inside or outside.
(Oct. 30, 2020  2:51 PM)TakaraTheLord Wrote:
(Oct. 30, 2020  2:39 PM)kai edits Wrote: Sparking please.

I think I can design a maiden. (I'm still an aprentice in tinkercad) Do you want the rubber to be inside or outside.

i got the layer almost done and should it be black or white

Grave Layer: https://www.tinkercad.com/things/hZavLGM...bladerumar

i used copy of Right spin sparking layer
(Oct. 30, 2020  2:54 PM)BladerUmarWBO Wrote:
(Oct. 30, 2020  2:51 PM)TakaraTheLord Wrote: I think I can design a maiden. (I'm still an aprentice in tinkercad) Do you want the rubber to be inside or outside.

i got the layer almost done and should it be black or white

Grave Layer: https://www.tinkercad.com/things/hZavLGM...bladerumar

i used copy of Right spin sparking layer
Thats cool but I need a chip also since i broke my maiden chip.

(Oct. 30, 2020  2:51 PM)TakaraTheLord Wrote:
(Oct. 30, 2020  2:39 PM)kai edits Wrote: Sparking please.

I think I can design a maiden. (I'm still an aprentice in tinkercad) Do you want the rubber to be inside or outside.
Can you try please.
(Oct. 30, 2020  3:40 PM)kai edits Wrote:
(Oct. 30, 2020  2:54 PM)BladerUmarWBO Wrote: i got the layer almost done and should it be black or white

Grave Layer: https://www.tinkercad.com/things/hZavLGM...bladerumar

i used copy of Right spin sparking layer
Thats cool but I need a chip also since i broke my maiden chip.

(Oct. 30, 2020  2:51 PM)TakaraTheLord Wrote: I think I can design a maiden. (I'm still an aprentice in tinkercad) Do you want the rubber to be inside or outside.
Can you try please.
Do you want the rubber inside or ouside?
(Oct. 30, 2020  3:45 PM)TakaraTheLord Wrote:
(Oct. 30, 2020  3:40 PM)kai edits Wrote: Thats cool but I need a chip also since i broke my maiden chip.

Can you try please.
Do you want the rubber inside or ouside?
Outside cause I want maiden to spin steal.
(Oct. 30, 2020  2:54 PM)BladerUmarWBO Wrote:
(Oct. 30, 2020  2:51 PM)TakaraTheLord Wrote: I think I can design a maiden. (I'm still an aprentice in tinkercad) Do you want the rubber to be inside or outside.

i got the layer almost done and should it be black or white

Grave Layer: https://www.tinkercad.com/things/hZavLGM...bladerumar

i used copy of Right spin sparking layer

Is that disaster hades and you copied it? People really need to start getting creative and do original stuff.
Can anyone seriously make a design that includes
Spin steal
Sparking bey
Defense setup
A strong chip.
ayyyyy yall actually getting productive.

Part Suggestions: (pick the ones u like best then buy them)
00proof Universe
0turn xt+
Ratchet Atomic
00 Keep'
Convert Merge'(unbalanced for atk, balanced for def)
Sting Loop
7bump quest
Yard Metal 1A
Hybrid
Hurricane orbit metal

These are not necessarily good combos, more like stock combos that TT would 100% pull.
(Oct. 30, 2020  5:40 PM)The Blacknight Wrote: ayyyyy yall actually getting productive.

Part Suggestions: (pick the ones u like best then buy them)
00proof Universe
0turn xt+
Ratchet  Atomic
00 Keep'
Convert Merge'(unbalanced for atk, balanced for def)
Sting  Loop
7bump quest
Yard Metal 1A
Hybrid
Hurricane orbit metal

These are not necessarily good combos, more like stock combos that TT would 100% pull.
I gonna use hybrid since I have the driver sad part is the motor broken 😰
(Oct. 30, 2020  5:42 PM)kai edits Wrote:
(Oct. 30, 2020  5:40 PM)The Blacknight Wrote: ayyyyy yall actually getting productive.

Part Suggestions: (pick the ones u like best then buy them)
00proof Universe
0turn xt+
Ratchet  Atomic
00 Keep'
Convert Merge'(unbalanced for atk, balanced for def)
Sting  Loop
7bump quest
Yard Metal 1A
Hybrid
Hurricane orbit metal

These are not necessarily good combos, more like stock combos that TT would 100% pull.
I gonna use hybrid since I have the driver sad part is the motor broken 😰

Just get two rb beys off beys and bricks, only $25
(Oct. 30, 2020  5:46 PM)The Blacknight Wrote:
(Oct. 30, 2020  5:42 PM)kai edits Wrote: I gonna use hybrid since I have the driver sad part is the motor broken 😰

Just get two rb beys off beys and bricks

I am broke right now. So I am gonna take a pic of my parts right after I finish school for today.

(Oct. 30, 2020  2:51 PM)TakaraTheLord Wrote:
(Oct. 30, 2020  2:39 PM)kai edits Wrote: Sparking please.

I think I can design a maiden. (I'm still an aprentice in tinkercad) Do you want the rubber to be inside or outside.
Are you making the design still?
(Oct. 30, 2020  5:47 PM)kai edits Wrote:
(Oct. 30, 2020  5:46 PM)The Blacknight Wrote: Just get two rb beys off beys and bricks

I am broke right now. So I am gonna take a pic of my parts right after I finish school for today.

(Oct. 30, 2020  2:51 PM)TakaraTheLord Wrote: I think I can design a maiden. (I'm still an aprentice in tinkercad) Do you want the rubber to be inside or outside.
Are you making the design still?
Yes.It's hard
Ok thank you bro.
(Oct. 29, 2020  11:40 PM)kai edits Wrote: I need help with the new maiden anyone want to help.

(Oct. 30, 2020  12:53 AM)kai edits Wrote:
(Oct. 30, 2020  12:50 AM)beykid44 Wrote: maiden is a defense type so what if we make an all new chassis with the gimmick of being turned around  2b for shock absorbtion and locked
It would be very cool.
Can someone make me a 3d design for my new maiden. 
I still need a name for the new maiden evolution.

(Oct. 30, 2020  1:21 AM)kai edits Wrote: Guardian maiden it is I guess.
Now all i need a is a 3d model to sent to the guy that printed maiden out for me.

(Oct. 30, 2020  3:15 AM)kai edits Wrote: Can someone make a 3d model of my new maiden.

(Oct. 30, 2020  4:04 AM)kai edits Wrote: Can anyone make a design for guardian maiden?

(Oct. 30, 2020  1:26 PM)kai edits Wrote: I was wondering if some one can start working on the new design of guardian maiden.

(Oct. 30, 2020  2:16 PM)kai edits Wrote: Anyone want to do me a huge favor by making the new maiden 3d model?

(Oct. 30, 2020  2:26 PM)kai edits Wrote: Is anyone good at making 3d models so they can make maiden perfect.

(Oct. 30, 2020  5:09 PM)kai edits Wrote: Can anyone seriously make a design that includes
Spin steal
Sparking bey
Defense setup
A strong chip.

Oh my god STOP BEGGING PEOPLE TO MAKE YOUR BEY! YOU ONLY NEED TO ASK ONCE!

If nobody wants to make it then make it yourself, don't keep asking for someone to make it for you!
(Oct. 30, 2020  7:19 PM)BladerGem Wrote:
(Oct. 29, 2020  11:40 PM)kai edits Wrote: I need help with the new maiden anyone want to help.

(Oct. 30, 2020  12:53 AM)kai edits Wrote: It would be very cool.
Can someone make me a 3d design for my new maiden. 
I still need a name for the new maiden evolution.

(Oct. 30, 2020  1:21 AM)kai edits Wrote: Guardian maiden it is I guess.
Now all i need a is a 3d model to sent to the guy that printed maiden out for me.

(Oct. 30, 2020  3:15 AM)kai edits Wrote: Can someone make a 3d model of my new maiden.

(Oct. 30, 2020  4:04 AM)kai edits Wrote: Can anyone make a design for guardian maiden?

(Oct. 30, 2020  1:26 PM)kai edits Wrote: I was wondering if some one can start working on the new design of guardian maiden.

(Oct. 30, 2020  2:16 PM)kai edits Wrote: Anyone want to do me a huge favor by making the new maiden 3d model?

(Oct. 30, 2020  2:26 PM)kai edits Wrote: Is anyone good at making 3d models so they can make maiden perfect.

(Oct. 30, 2020  5:09 PM)kai edits Wrote: Can anyone seriously make a design that includes
Spin steal
Sparking bey
Defense setup
A strong chip.

Oh my god STOP BEGGING PEOPLE TO MAKE YOUR BEY! YOU ONLY NEED TO ASK ONCE!

If nobody wants to make it then make it yourself, don't keep asking for someone to make it for you!

rOaStEd
I need a beyblade that's worthy. One last time can someone make Guardian maiden.
(Oct. 30, 2020  7:55 PM)kai edits Wrote: I need a beyblade that's worthy. One last time can someone make Guardian maiden.

I'm working on it.I'm almost done.
(Oct. 30, 2020  7:59 PM)TakaraTheLord Wrote:
(Oct. 30, 2020  7:55 PM)kai edits Wrote: I need a beyblade that's worthy. One last time can someone make Guardian maiden.

I'm working on it.I'm almost done.

Thank you very much. I hope we battle soon!
Maiden vs your bey!
kai edits, can u take a pic of ur current parts?