3D PRINTING SERVICE:

(Nov. 15, 2018  1:23 PM)Burst3DPrinter Wrote: So I am working on a 3D Printed request service. I accept 10 requests at a time. so far ALL SLOTS ARE FILLED. Here is the link to the request form: https://goo.gl/forms/LDWv0B2jH9sEEJCT2 [Closed until some of the orders are shipped (Unless the request is for a driver then I can accept it)]

NOTE: FOR FUTURE REFERENCE AND TO AVOID CONFUSION, "EMAIL VIA FORM" REFERS TO A REQUEST MADE ON THE FORM THAT I HAVE THE EMAIL FOR BUT NOT THE WBO ACCOUNT NAME

1.abidjkhan7 (need to print)
2.
3.
4.kingbladersoul
5.crystal azule
6.omega263 (need to print)
7.Ntruder19
8.tpoez28
9.EMAIL VIA FORM (need to print)
10.EMAIL VIA FORM (need to print)

As of right now, the requests are for free but in the future it will be 
$5 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick) for a complete bey. 
$1.50 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick) for a Layer
$2.50 USD for a Disk
$1.00  USD for a Driver

I also plan on making launchers and stadiums sometime in the future.

Expect the process to be lengthy because I first need to develop concept sketches then try to integrate them into my 3D modeling software.

Here are some images for one of the designs:
Design #8 (tpoez28 -incomplete)
https://drive.google.com/file/d/1dlrRSm4...sp=sharing (DRIVER)
https://drive.google.com/file/d/1ASqlK_B...sp=sharing (CHO-Z METAL)
https://drive.google.com/file/d/1XaebhOj...sp=sharing (DISK)
https://drive.google.com/file/d/1BUug8sZ...sp=sharing (LAYER)

Molds (4 Bladed Discs -Even Distribution)
https://drive.google.com/open?id=15g_PMO...G98VRzbM5W

I think you swapped the labels for Driver and Cho-Z Metal
The link for the request is not working.....
i think i know what you mean. is it like a url that you can't really click on?
(Dec. 04, 2018  12:24 AM)Draigo Wrote: Hey im new here at wbo so i was wondering if anyone can tell me if these beyblade burst pics I made are any good? 
https://drive.google.com/file/d/1DrocvWk...p=drivesdk

And

https://drive.google.com/file/d/1e66LVEK...p=drivesdk

I think the files are private...
(Dec. 04, 2018  1:02 AM)CitrusNinja3 Wrote:
(Dec. 04, 2018  12:24 AM)Draigo Wrote: Hey im new here at wbo so i was wondering if anyone can tell me if these beyblade burst pics I made are any good? 
https://drive.google.com/file/d/1DrocvWk...p=drivesdk

And

https://drive.google.com/file/d/1e66LVEK...p=drivesdk

I think the files are private...

They are
(Dec. 04, 2018  1:07 AM)omega263 Wrote:
(Dec. 04, 2018  1:02 AM)CitrusNinja3 Wrote: I think the files are private...

They are

It looks good
Now only the second one is private ¯\_(ツ)_/¯
this is burst's 3d printing thread lets try to keep it related to his work
(Dec. 04, 2018  1:31 AM)Draigo Wrote: Here is its evolution here is the bottom
https://drive.google.com/file/d/1q5bsBNs...p=drivesdk
And the top
https://drive.google.com/file/d/1527cKe4...p=drivesdk

Its called Elemental Draikious

The first one is still blocked
again... this is burst's thread you should at least ask for permission to share designs if they currently not commissioned
I hope I can get at least one commission in before Burst3DPrinter price them, but even then the prices are looking pretty cheap but requesting a commission for parts of beys for free is something that shouldn't be passed by.

(Dec. 03, 2018  9:53 PM)#Fafnir Wrote:
(Dec. 03, 2018  9:13 PM)IceCreeper909 Wrote: So can I take that spot?

(Dec. 02, 2018  9:32 PM)#Fafnir Wrote: I want the spot

If it's still free

I already took it

And this is partly why I hope that I can request a commission soon. The ten spots are on a first-come, first-serve system and the last thing I need is to be in IceCreeper909's position because if something like that happens to me, it will sucks for me. Probably not for somebody else, but it most likely will for me.

(Nov. 30, 2018  7:47 AM)Charged Diamond Wrote:
(Nov. 30, 2018  3:58 AM)#Fafnir Wrote: Is it free for me to get one?

Currently, it is free to get a Beyblade, but in the spots to order a Beyblade are full, so we may have to wait a bit. However, Burst3DPrinter is saying that a few slots could open up soon. Sometime in 2019, when Burst3DPrinter gets a website, we will have to pay 6 USD for a Beyblade.

Also wait, what? Where did Burst3DPrinter said that he was making a website because you're the only person I heard about that from.
(Dec. 04, 2018  12:29 AM)kingbladersoul Wrote: ok ill heed your advice

im just very hyped up
Its ok sorry if i sounded rude
(Dec. 04, 2018  3:41 AM)QN10 Wrote: I hope I can get at least one commission in before Burst3DPrinter price them, but even then the prices are looking pretty cheap but requesting a commission for parts of beys for free is something that shouldn't be passed by.

(Dec. 03, 2018  9:53 PM)#Fafnir Wrote: I already took it

And this is partly why I hope that I can request a commission soon. The ten spots are on a first-come, first-serve system and the last thing I need is to be in IceCreeper909's position because if something like that happens to me, it will sucks for me. Probably not for somebody else, but it most likely will for me.

(Nov. 30, 2018  7:47 AM)Charged Diamond Wrote: Currently, it is free to get a Beyblade, but in the spots to order a Beyblade are full, so we may have to wait a bit. However, Burst3DPrinter is saying that a few slots could open up soon. Sometime in 2019, when Burst3DPrinter gets a website, we will have to pay 6 USD for a Beyblade.

Also wait, what? Where did Burst3DPrinter said that he was making a website because you're the only person I heard about that from.

Oh Burst3DPrinter said that he was making a website in the first page of this thread. (Comment section) I hope I helped! Smile
!!! It says spots are open! I'll take one!
I see 2 spots open. If it is still free to pay(if they are even open, the form is not open) then may I reserve a spot until I get my design together? Warning: my beyblade idea is super intricate, and it is a full beyblade, so if you cannot do that, then I will let someone else take the spot. If it is not free, then I am not able to take the spot, as I have been having some problems lately. I understand that you are extremely busy, with work/school and all of this, so please feel free to work on mine last, as I am not in a rush. Please PM me if you I can take the spot.
(Dec. 04, 2018  12:43 AM)CitrusNinja3 Wrote:
(Nov. 15, 2018  1:23 PM)Burst3DPrinter Wrote: So I am working on a 3D Printed request service. I accept 10 requests at a time. so far ALL SLOTS ARE FILLED. Here is the link to the request form: https://goo.gl/forms/LDWv0B2jH9sEEJCT2 [Closed until some of the orders are shipped (Unless the request is for a driver then I can accept it)]

NOTE: FOR FUTURE REFERENCE AND TO AVOID CONFUSION, "EMAIL VIA FORM" REFERS TO A REQUEST MADE ON THE FORM THAT I HAVE THE EMAIL FOR BUT NOT THE WBO ACCOUNT NAME

1.abidjkhan7 (need to print)
2.
3.
4.kingbladersoul
5.crystal azule
6.omega263 (need to print)
7.Ntruder19
8.tpoez28
9.EMAIL VIA FORM (need to print)
10.EMAIL VIA FORM (need to print)

As of right now, the requests are for free but in the future it will be 
$5 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick) for a complete bey. 
$1.50 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick) for a Layer
$2.50 USD for a Disk
$1.00  USD for a Driver

I also plan on making launchers and stadiums sometime in the future.

Expect the process to be lengthy because I first need to develop concept sketches then try to integrate them into my 3D modeling software.

Here are some images for one of the designs:
Design #8 (tpoez28 -incomplete)
https://drive.google.com/file/d/1dlrRSm4...sp=sharing (DRIVER)
https://drive.google.com/file/d/1ASqlK_B...sp=sharing (CHO-Z METAL)
https://drive.google.com/file/d/1XaebhOj...sp=sharing (DISK)
https://drive.google.com/file/d/1BUug8sZ...sp=sharing (LAYER)

Molds (4 Bladed Discs -Even Distribution)
https://drive.google.com/open?id=15g_PMO...G98VRzbM5W

I think you swapped the labels for Driver and Cho-Z Metal
whoops i'll fix it
Hey how is my part going?
Would it be OK for my layers free spinning layer to be made of tpu plastic or rubber?