my bey has become grey what to  do?

send a pic
and have you put in any liquids?

---

my bey has become grey what to  do?

use Imgur to send a pic

---

“Look, It Takes A Lot To Get Me Worked Up, But This Time My Boiling Point’s As Low As It’s Ever Been. The ‘Copy Ninja’ Kakashi, The Man Who Copied One Thousand Techniques Is About To Go On A Rampage!” Kakashi Hatake

my bey has become grey what to  do?

That’s a bit Vague. What do you mean it turned grey?

my bey has become grey what to  do?

If it’s only the metal, like the disc, some parts of the layer, and the driver if you have Octa,ChargeM,etc then that’s normal and doesn’t make it any weaker.

---

Wadding polish! Eagle One Nevr Dull wadding polish! That stuff makes gritty (metal) Beyblade parts look brand new. You can find it in the automotive section at Walmart

---

One must never, never, never rush the plumb bob~
Slow is the way, the only way to go~
Clear your schedule, before you use the plumb bob~
Yes, the plumb bob, is mighty, mighty, miiighty, sloooooooooooowww~

my bey has become grey what to  do?

If it’s only the metal, like the disc, some parts of the layer, and the driver if you have Octa,ChargeM,etc then that’s normal and doesn’t make it any weaker.

Oh that just means that your parts are oxidizing. Pretty much when you leave something uncleaned for so long that they change color

If it’s only the metal, like the disc, some parts of the layer, and the driver if you have Octa,ChargeM,etc then that’s normal and doesn’t make it any weaker.

Oh that just means that your parts are oxidizing. Pretty much when you leave something uncleaned for so long that they change color

This is bad? (It will probably happen to me)

---

Rank 0th means I'm better than 1st

Oh that just means that your parts are oxidizing. Pretty much when you leave something uncleaned for so long that they change color

This is bad? (It will probably happEn to me)

It doesn’t affect their performance, it just makes the metal less shiny.

---

Oh, ok then, thanks

---

Rank 0th means I'm better than 1st

Oh, ok then, thanks

Yeah their is no problem with Oxidation with the metal. It doesn’t really change the performance of the beys that much; but if you really want to clean it, powder metal polishers like “Never Dull” and a rag will do the trick. After using some Never Dull, rub it with the rag and let it sit for a while (not 10 minutes, at least 20-30 min). And Boom, you got a shiny and clean metal part.

---

Plus, the rules doesn’t state whether we are not allowed to polish any metal parts. As long as the performance or weight doesn’t change that much, then there is no problem.