So I've just recently received my GT triple booster set and there's been one part I've really wanted to use but couldn't get the hang of. Dimension' is a really confusing part to me and I am baffled on how to use it. Please help a noob out.

So dimension has six modes. If you turn the spinning plate all the way counterclockwise, it should line up with arrows that say "Balance". This mode has a tiny rubber tip that helps act like a reverse unite driver. When you turn the plate 90 degrees, they should line up with the screws on the driver, and the rubber will not be exposed. This is attack mode: a large hole flat. There are three heights and to access all of them, you just turn the driver 90 degrees for all of them. From first to last(starting from the lowest mode possible which is achieved from twisting the ring to the maximum amount counterclockwise.) Low balance, low attack, medium balance, medium attack, high balance, high attack. Hope this helps!

You turn the little knob thing to the right to make it taller and to the left to make it shorter.

You turn the little knob thing to the right to make it taller and to the left to make it shorter.

Guess I could've just said that lol

So dimension has six modes. If you turn the spinning plate all the way counterclockwise, it should line up with arrows that say "Balance". This mode has a tiny rubber tip that helps act like a reverse unite driver. When you turn the plate 90 degrees, they should line up with the screws on the driver, and the rubber will not be exposed. This is attack mode: a large hole flat. There are three heights and to access all of them, you just turn the driver 90 degrees for all of them. From first to last(starting from the lowest mode possible which is achieved from twisting the ring to the maximum amount counterclockwise.) Low balance, low attack, medium balance, medium attack, high balance, high attack. Hope this helps!

It did! I spent the last 30mins trying to beat hS.0W.Br in opposite spin. So far I've gotten 1 out spin.

So dimension has six modes. If you turn the spinning plate all the way counterclockwise, it should line up with arrows that say "Balance". This mode has a tiny rubber tip that helps act like a reverse unite driver. When you turn the plate 90 degrees, they should line up with the screws on the driver, and the rubber will not be exposed. This is attack mode: a large hole flat. There are three heights and to access all of them, you just turn the driver 90 degrees for all of them. From first to last(starting from the lowest mode possible which is achieved from twisting the ring to the maximum amount counterclockwise.) Low balance, low attack, medium balance, medium attack, high balance, high attack. Hope this helps!

It did! I spent the last 30mins trying to beat hS.0W.Br in opposite spin. So far I've gotten 1 out spin.

What combo are you using?

I feel like its worth noting since the balance mode has a rubber spike- it will wear down to be slightly flatter with use.

and depending on how you launch, the spin direction and how the combo interacts with the opponent (i.e. getting slammed into the stadium wall) that may cause it to change height and mode.

---

It did! I spent the last 30mins trying to beat hS.0W.Br in opposite spin. So far I've gotten 1 out spin.

What combo are you using?

I was using stock combo. Also, I got a couple of bursts!

What combo are you using?

I was using stock combo. Also, I got a couple of bursts!

Stock Lord spriggan? If so, then go left spin medium against hS on bearing. I don't have Lord or bearing, but I assume direct contact would achive the most effective damage.

I was using stock combo. Also, I got a couple of bursts!

Stock Lord spriggan? If so, then go left spin medium against hS on bearing. I don't have Lord or bearing, but I assume direct contact would achive the most effective damage.

Left absolutly destroys it. I was just challenging myself with right spinning.

Stock Lord spriggan? If so, then go left spin medium against hS on bearing. I don't have Lord or bearing, but I assume direct contact would achive the most effective damage.

Left absolutly destroys it. I was just challenging myself with right spinning.

Ah. In that case, either right spin low attack or high attack.

Left absolutly destroys it. I was just challenging myself with right spinning.

Ah. In that case, either right spin low attack or high attack.

I’ve heard that Low Balance Mode has a bit of LAD.

Ah. In that case, either right spin low attack or high attack.

I’ve heard that Low Balance Mode has a bit of LAD.

I've tested that, and it's true. I beats my Atomic driver often.

---

Player and Organizer for NC Beyblade | Use code "HASHTAGFAFNIR" for 8% off on BeysAndBricks!

I’ve heard that Low Balance Mode has a bit of LAD.

I've tested that, and it's true. I beats my Atomic driver often.

Same or opposite spin?

I've tested that, and it's true. I beats my Atomic driver often.

Same or opposite spin?

Both. Dm' Is a good driver for LAD imo.

---

Player and Organizer for NC Beyblade | Use code "HASHTAGFAFNIR" for 8% off on BeysAndBricks!

Same or opposite spin?

Both. Dm' Is a good driver for LAD imo.

Wait. Post a same spin test with Atomic and Dm’. I thought Atomic ruled same-spin LAD(maybe I’m wrong).

Both. Dm' Is a good driver for LAD imo.

Wait. Post a same spin test with Atomic and Dm’. I thought Atomic ruled same-spin LAD(maybe I’m wrong).

What layers and disks?

---

Player and Organizer for NC Beyblade | Use code "HASHTAGFAFNIR" for 8% off on BeysAndBricks!

Wait. Post a same spin test with Atomic and Dm’. I thought Atomic ruled same-spin LAD(maybe I’m wrong).

What layers and disks?

I guess pP.00C.At and pP.00C.Dm’(Low Balance Mode). Or whatever parts you have.

What layers and disks?

I guess pP.00C.At and pP.00C.Dm’(Low Balance Mode). Or whatever parts you have.

I only have a hasbro At, so I'll do Sr3 0 At VS Sr 0 Dm'(low balance mode). Does that work? I'll do 5 battles.

---

Player and Organizer for NC Beyblade | Use code "HASHTAGFAFNIR" for 8% off on BeysAndBricks!

I guess pP.00C.At and pP.00C.Dm’(Low Balance Mode). Or whatever parts you have.

I only have a hasbro At, so I'll do Sr3 0 At VS Sr 0 Dm'(low balance mode). Does that work? I'll do 5 battles.

Do you have 2 Cross frames?

I only have a hasbro At, so I'll do Sr3 0 At VS Sr 0 Dm'(low balance mode). Does that work? I'll do 5 battles.

Do you have 2 Cross frames?

Just did it without frames. Sr3 0 At had a 100% win rate in same spin.

---

Player and Organizer for NC Beyblade | Use code "HASHTAGFAFNIR" for 8% off on BeysAndBricks!

Do you have 2 Cross frames?

Just did it without frames. Sr3 0 At had a 100% win rate in same spin.

Ok. Atomic is still the best same-spin LAD driver. Thanks for testing it.

Just did it without frames. Sr3 0 At had a 100% win rate in same spin.

Ok. Atomic is still the best same-spin LAD driver. Thanks for testing it.

Your welcome.

---

Player and Organizer for NC Beyblade | Use code "HASHTAGFAFNIR" for 8% off on BeysAndBricks!