Polta



Type Survival
Number 7
System 4 Layer


Attack Ring (AR) Tricutter

4 grams

One of the smallest ARs ever made. It has 6 points, 3 large, and 3 very small points. The AR is thin and it's weight is evenly distributed, making it good for endurance. Due to the AR's size, it can be used for Weight Disk Attack and many more thing. The small size also allows Driger V2 Upper Attack SP to be undisturbed and able to preform upper attack. It is one of the earliest ARs in the beyblade series. It is very useful for many custimization. Like all 4 piece beyblades,the AR is not able to fit a Left SG, a large downside for some Customization purposes. Another downside is it can break if roughly used. As bad as some the flaws are, it is still top tier. The AR can be used in situations where the BB or WD attacks the opposing beyblade.

Mold Variations

The TAKARA version is thin and breakable. The Hasbro is reinforced along the AR. This adds a small weight difference that is not noticable. This adds less recoil and breakage issues.

Use in Upper Attack Combinations
Unlike with Upper Claw, the Upper Attack SP can be efficient on its own; not relying on another part. Since Upper Claw is a support part, it has the advantage over Upper Attack ARs in terms of having a lower starting ramp point. Because of this, the SP can serve as the main point of attack instead of having the AR do that. Here is an example of how the Upper Attack SPs can be used on its own without the AR being the main attack part.

Use in Upper Attack Customization
AR: Trycutter
WD: Ten Heavy
SG: Right SG
SG Shaft: Full Auto Clutch (Driger F)*
SP: Upper Attack (Driger V2)
BB: Customize Grip (Dragoon V2)
In order to focus on attacking with the support part only, smaller parts aside from the SP and BB must be used thus the reasoning for the use of a small AR such as Try Cutter (Polta). A Ten Heavy is used because it is fairly compact with a reasonable amount of weight to control the SG. The SG uses the shaft from Driger F because it is fast.

Weight Disk (WD)

See Wide Weight Disks


Blade Base

See Sharp BB

Other Versions

Saizo Translucent Black;Heavy WD

Spark Knight translucent yellow, balance WD

Gallery


Overall

The AR is neat to have. It has many useless parts and is a very rare Beyblade. Bladers should own multiple copies of this Beyblade

Upper Attack combo from Beywiki

---

Credit to NightVirgo8787 for the Sig

Phoenix Inferno, you should work on making the Drafts you already have, better, rather than spitting out lower quality pieces.

Fine but I'll improve this draft. But No it is about time this is on beywiki. And okay.

---

Credit to NightVirgo8787 for the Sig

Polta



Type Survival
Number 7
System 4 Layer


Attack Ring (AR) Tricutter

4 grams

One of the smallest AR ever made. It has 6 points 3 large, and 3 very small points. The AR is thin and its weight is evenly distributed, making it good for endurance. Due to the AR's size, it can be the best choice when used for Weight Disk Attack and many more things. The small, compact size also allows Driger V2 Upper Attack SP's to be undisturbed and able to preform successful upper attack. It is one of the earliest ARs in the beyblade series. It is very useful for some custimization. Another downside is its claws can snap and break if roughly used. The AR can be used in situations where the BB or WD attacks the opposing beyblade.

Mold Variations

The TAKARA version is thin and breakable. The Hasbro is reinforced along the AR. This adds a small weight difference that is not noticable. This adds less recoil and breakage issues. This version is actually not noticed by many.

Use in Upper Attack Combinations
Unlike with Upper Claw, the Upper Attack SP can be efficient on its own; not relying on another part. Since Upper Claw is a support part, it has the advantage over Upper Attack ARs in terms of having a lower starting ramp point. Because of this, the SP can serve as the main point of attack instead of having the AR do that. Here is an example of how the Upper Attack SPs can be used on its own without the AR being the main attack part.

Use in Upper Attack Customization
AR: Trycutter
WD: Ten Heavy
SG: Right SG
SG Shaft: Full Auto Clutch (Driger F)*
SP: Upper Attack (Driger V2)
BB: Customize Grip (Dragoon V2)
In order to focus on attacking with the support part only, smaller parts aside from the SP and BB must be used thus the reasoning for the use of a small AR such as Try Cutter (Polta). A Ten Heavy is used because it is fairly compact with a reasonable amount of weight to control the SG. The SG uses the shaft from Driger F because it is fast.

Weight Disk (WD)

See Wide Weight Disks


Blade Base

See Sharp BB

Other Versions

Saizo Translucent Black;Heavy WD

Spark Knight translucent yellow, balance WD

Gallery


Overall

The AR is not bad to have. It has many useless parts and is a very rare Beyblade. Bladers should own at least 1 of this Beyblade

Upper Attack combo from Beywiki

I made a few edits and it is not a stub. How do you like it.

---

Credit to NightVirgo8787 for the Sig

Oh gods, this draft is terrible, content wise, and TBH the wording,professionalism and puncuation isn't great.

---

Look at this (Click to View)

Thanks Angry Face :D
Plastics request thread, request your combo ||
What to Buy in Plastics || Plastic Parts Discussion|| Competative Heavy Metal System Combos|| HMS Parts Disscusion

O I See I Saw and fixed the draft a bit.

---

Credit to NightVirgo8787 for the Sig

You dont understand, pretty much everything you've wrote is faulse.

---

Look at this (Click to View)

Thanks Angry Face :D
Plastics request thread, request your combo ||
What to Buy in Plastics || Plastic Parts Discussion|| Competative Heavy Metal System Combos|| HMS Parts Disscusion

Yeah, Mods feel free to close it down.

---

Credit to NightVirgo8787 for the Sig