I was bored and desided to use xscalius on heavy revolve to see how the off balance layer will act with a stamina driver and it tended to burst so I put it on survive (it has a stronger spring I think) and it bursted less and did pretty good against the attack and defense types I put it up against But due to part limitations I was unable to test it against all the best combos. And confirmation on the viability of something like X.H.S?

---

Highly Observant Hasbro Blader.

---

I was bored and desided to use xscalius on heavy revolve to see how the off balance layer will act with a stamina driver and it tended to burst so I put it on survive (it has a stronger spring I think) and it bursted less and did pretty good against the attack and defense types I put it up against But due to part limitations I was unable to test it against all the best combos. And confirmation on the viability of something like X.H.S?

Try Press or Needle to increase self-KO resistance?

Then how did it always win? It resisted burst finishes, did not move from it's place in the middle, and counter attacked, able to defeat many top-tier combos.

I did some impromptu tests (don't have time at the moment for full tests) but from I've found, the only thing the combo has is Burst resistance. Any heavy Attack Type is almost guaranteed to send it flying. It only wins if it's saved by the walls, in the Takara Tomy stadium where Knock-Outs are hard to get.

Did a few rounds of Stamina, Unicrest Heavy Press outspun it repeatedly, even when your combo was launched second

Could u test hasbro h2 for stalling and hasbro r2 for ko attack.in blader zyeyos vid r2 h x won 2/7 matches against a mould godchip guardian kerbeus 4 glaive revolve. Given how powerful the opponent was it still did ok.could try it against unicrest pls

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

Xcalius Knuckle Massive. I used it with a Supergrip Launcher and normal ripcord, and it never lost a battle to my friend who used a string launcher. He made a lot of different combos that all lost.
nice combo

I was bored and desided to use xscalius on heavy revolve to see how the off balance layer will act with a stamina driver and it tended to burst so I put it on survive (it has a stronger spring I think) and it bursted less and did pretty good against the attack and defense types I put it up against But due to part limitations I was unable to test it against all the best combos. And confirmation on the viability of something like X.H.S?

Try Press or Needle to increase self-KO resistance?

I put the needle I use on my U2 combo ( this needle is the tightest driver I have) on Xscalius and created a monster.

It. Will. Not. Burst.

If you have a needle that makes the combo X.H.N extremely tight pit it up against lS.

---

Highly Observant Hasbro Blader.

---

Try Press or Needle to increase self-KO resistance?

I put the needle I use on my U2 combo ( this needle is the tightest driver I have) on Xscalius and created a monster.

It. Will. Not. Burst.

If you have a needle that makes the combo X.H.N extremely tight pit it up against lS.

testing this when i get my beyblades back.

I put the needle I use on my U2 combo ( this needle is the tightest driver I have) on Xscalius and created a monster.

It. Will. Not. Burst.

If you have a needle that makes the combo X.H.N extremely tight pit it up against lS.

testing this when i get my beyblades back.

Ok. And use the needle from evipero. That one is tightest for me. If it isn't crazy tight try other needles.

---

Highly Observant Hasbro Blader.

---

testing this when i get my beyblades back.

Ok. And use the needle from evipero. That one is tightest for me. If it isn't crazy tight try other needles.

oh dang i only have unicrest u2 needle! i can buy evipero very soon tho so when i buy it ill hit u up with the testings!

Ok. And use the needle from evipero. That one is tightest for me. If it isn't crazy tight try other needles.

oh dang i only have unicrest u2 needle! i can buy evipero very soon tho so when i buy it ill hit u up with the testings!

You know you have the right needle when the resistance is crazy.

---

Highly Observant Hasbro Blader.

---

Ok. And use the needle from evipero. That one is tightest for me. If it isn't crazy tight try other needles.

oh dang i only have unicrest u2 needle! i can buy evipero very soon tho so when i buy it ill hit u up with the testings!

if you can use the #C2645 mold of needle. it is the tightest.

---

Highly Observant Hasbro Blader.

---

oh dang i only have unicrest u2 needle! i can buy evipero very soon tho so when i buy it ill hit u up with the testings!

if you can use the #C2645 mold of needle. it is the tightest.

Interesting. What parts would you say suffer the most from bad tightness and which parts have you noticed are affected more.

---

Spoiler (Click to View)

Kai-V is an omniscient being who imparts starving mortals such as ourselves with the morsels of Beyblade foreknowledge we so unknowingly desired. She does so not out of grace, but because it pleases her. May the great Kai-V excuse your insolence and show mercy upon your blader spirit.

Beymen.

Evil is very bad though... There is just nothing good to do with it.

They do not, because clearly you punch them with these brass knuckles.

if you can use the #C2645 mold of needle. it is the tightest.

Interesting. What parts would you say suffer the most from bad tightness and which parts have you noticed are affected more.

one thing I noticed is that compared to other D2s mine is weak. I think it affects drivers the most.

Just test parts to see how tight they are. I will test all of the drivers i have and list them from tightest to loosest with codes included.

---

Highly Observant Hasbro Blader.

---

By tightness on xscalius.

Tightest: N (#C2645)
Tight: S (#B9496) F (#B9493) N (#C2282) A (#B9492) X (#C0596)
Above Average: H (#C2333) M (#B9507) D (#B9492) U (#B9498) R (#C0596) V (#B9498) Z (#B9496) J (#C0600) R (#B9489) X (#C2281)
Average: B (#B9493) M (#C0599) M (#C0601)
Loose: P (#B9490)

---

Highly Observant Hasbro Blader.

---

By tightness on xscalius.

Tightest: N (#C2645)
Tight: S (#B9496) F (#B9493) N (#C2282) A (#B9492) X (#C0596)
Above Average: H (#C2333) M (#B9507) D (#B9492) U (#B9498) R (#C0596) V (#B9498) Z (#B9496) J (#C0600) R (#B9489) X (#C2281)
Average: B (#B9493) M (#C0599) M (#C0601)
Loose: P (#B9490)

Do you know this information for Roktavor? If you did, that would be very helpful

I have included a list of what I consider to be competitive in the current Hasbro Metagame.

KO Attack:
Roktavor  H/G/K  X/V
Xcalius  H/G/K  X/V
Valtryek V2  H/G/K  X/V

Mixed Attack:
Roktavor  H/G/K  A/Z
Xcalius H/G/K A/Z
Zeutron Z2  H/G/K  A/Z
Valtryek V2 H/G/K  A/Z
Valtryek  H/G/K A/Z

Burst Attack:
Roktavor  H/G/K  S/P/N/D/R
Xcalius  H/G/K  S/P/N/D/R
Valtryek  H/G/K  S/P/N/D/R

KO Defense: (I'm not sure if this really deserves its own spot)
Yegdrion Y2  H/G  U/D
Doomscizor D2  H/G  U/D
Evipero  H/G  U/D
Kerbeus K2  H/G  U/D
Unicrest  H/G  U/D
Gaianon G2?

Burst Defense: (because of the variation in spring tightness among defensive Hasbro drivers the most burst resistant driver will be the one which forms the tightest combo with a specific layer and may vary greatly)
Yegdrion Y2  H/G  P/N/S/D
Doomscizor D2  H/G  P/N/S/D
Evipero  H/G  P/N/S/D
Kerbeus K2  H/G  P/N/S/D
Unicrest  H/G  P/N/S/D
Gaianon G2?

Stamina:
Yegdrion Y2  H/G/K/S  R/S
Yegdrion  H/G/K/S  R/S
Kerbeus  H/G/K/S  R/S
Unicrest  H/G/K/S  R/S
Doomscizor D2  H/G/K/S  R/S

Mobile Stamina:
Yegdrion Y2  H/G/K/S  Z/A
Yegdrion  H/G/K/S  Z/A
Kerbeus  H/G/K/S  Z/A
Unicrest  H/G/K/S  Z/A

By tightness on xscalius.

Tightest: N (#C2645)
Tight: S (#B9496) F (#B9493) N (#C2282) A (#B9492) X (#C0596)
Above Average: H (#C2333) M (#B9507) D (#B9492) U (#B9498) R (#C0596) V (#B9498) Z (#B9496) J (#C0600) R (#B9489) X (#C2281)
Average: B (#B9493) M (#C0599) M (#C0601)
Loose: P (#B9490)

Do you know this information for Roktavor? If you did, that would be very helpful

Roktavor from my experience is looser than Xscalius so just follow the list.

---

Highly Observant Hasbro Blader.

---

I have included a list of what I consider to be competitive in the current Hasbro Metagame.

KO Attack:
Roktavor  H/G/K  X/V
Xcalius  H/G/K  X/V
Valtryek V2  H/G/K  X/V

Mixed Attack:
Roktavor  H/G/K  A/Z
Xcalius H/G/K A/Z
Zeutron Z2  H/G/K  A/Z
Valtryek V2 H/G/K  A/Z
Valtryek  H/G/K A/Z

Burst Attack:
Roktavor  H/G/K  S/P/N/D/R
Xcalius  H/G/K  S/P/N/D/R
Valtryek  H/G/K  S/P/N/D/R

KO Defense: (I'm not sure if this really deserves its own spot)
Yegdrion Y2  H/G  U/D
Doomscizor D2  H/G  U/D
Evipero  H/G  U/D
Kerbeus K2  H/G  U/D
Unicrest  H/G  U/D
Gaianon G2?

Burst Defense: (because of the variation in spring tightness among defensive Hasbro drivers the most burst resistant driver will be the one which forms the tightest combo with a specific layer and may vary greatly)
Yegdrion Y2  H/G  P/N/S/D
Doomscizor D2  H/G  P/N/S/D
Evipero  H/G  P/N/S/D
Kerbeus K2  H/G  P/N/S/D
Unicrest  H/G  P/N/S/D
Gaianon G2?

Stamina:
Yegdrion Y2  H/G/K/S  R/S
Yegdrion  H/G/K/S  R/S
Kerbeus  H/G/K/S  R/S
Unicrest  H/G/K/S  R/S
Doomscizor D2  H/G/K/S  R/S

Mobile Stamina:
Yegdrion Y2  H/G/K/S  Z/A
Yegdrion  H/G/K/S  Z/A
Kerbeus  H/G/K/S  Z/A
Unicrest  H/G/K/S  Z/A

i think y2 does not has good stamina. i saw in a vid stock r2 outspining stock y2 three times in a row.3-0.also add valtryek for ko attack too.also s2 has good ko attack and is a better mixed attacker than z2

---

Fav cho-Z combos
[\spoiler]
cR with A level chip 7 Revolve
rP with A level chip 10 Cross Atomic
zA with A level chip 0 Bump Destroy
hS with A level chip 7 Glaive Bearing
vL with A level chip 0 Reach Jolt
bL with A level chip 0 Glaive Variable(worn)

I have included a list of what I consider to be competitive in the current Hasbro Metagame.

KO Attack:
Roktavor  H/G/K  X/V
Xcalius  H/G/K  X/V
Valtryek V2  H/G/K  X/V

Mixed Attack:
Roktavor  H/G/K  A/Z
Xcalius H/G/K A/Z
Zeutron Z2  H/G/K  A/Z
Valtryek V2 H/G/K  A/Z
Valtryek  H/G/K A/Z

Burst Attack:
Roktavor  H/G/K  S/P/N/D/R
Xcalius  H/G/K  S/P/N/D/R
Valtryek  H/G/K  S/P/N/D/R

KO Defense: (I'm not sure if this really deserves its own spot)
Yegdrion Y2  H/G  U/D
Doomscizor D2  H/G  U/D
Evipero  H/G  U/D
Kerbeus K2  H/G  U/D
Unicrest  H/G  U/D
Gaianon G2?

Burst Defense: (because of the variation in spring tightness among defensive Hasbro drivers the most burst resistant driver will be the one which forms the tightest combo with a specific layer and may vary greatly)
Yegdrion Y2  H/G  P/N/S/D
Doomscizor D2  H/G  P/N/S/D
Evipero  H/G  P/N/S/D
Kerbeus K2  H/G  P/N/S/D
Unicrest  H/G  P/N/S/D
Gaianon G2?

Stamina:
Yegdrion Y2  H/G/K/S  R/S
Yegdrion  H/G/K/S  R/S
Kerbeus  H/G/K/S  R/S
Unicrest  H/G/K/S  R/S
Doomscizor D2  H/G/K/S  R/S

Mobile Stamina:
Yegdrion Y2  H/G/K/S  Z/A
Yegdrion  H/G/K/S  Z/A
Kerbeus  H/G/K/S  Z/A
Unicrest  H/G/K/S  Z/A

i think y2 does not has good stamina. i saw in a vid stock r2 outspining stock y2 three times in a row.3-0.also add valtryek for ko attack too.also s2 has good ko attack and is a better mixed attacker than z2

just to note that depending on the mold needle gives average to extreme burst resistance on xcalius.

---

Highly Observant Hasbro Blader.

---

Hi guys, I have a hasbro combo
.roktavor Heavy zephyr

---

Rip hasbro Press 2016-2017 

Hi guys, I have a hasbro combo
.roktavor Heavy zephyr

That's already on there

should i make a yt video about hasbro driver molds?

should i make a yt video about hasbro driver molds?

sure. it may help bladers create stronger combos.

---

Highly Observant Hasbro Blader.

---

xcalius heavy accel #B9505

X.K.N (#C2645) works wonders as a stationary attacker/ anti attack combo.


The benefit of that mold of needle is on xscalius you can use any disk with basically no risk of burst in most conditions.

---

Highly Observant Hasbro Blader.

---

betromoth b2 heavy accel #b9505 got attacked HEAD ON by roktavor heavy xtreme and roktavor bursted!