Beyblade parts you want to see come true!

I like to see a tip called BC: Cube Round which is a cube and underneath is a round dome in the shape of B, measuring 3cm.
I would also like to see EMF: Extreme Metal Flat.
Speaking of viability issues, I brought up my "J140" spintrack idea before but nobody cared beyond the fact that it would lose stamina when bouncing. I doubt they realised the competitive implications that the part was supposed to have. To recap, the part is as follows:

"A spin track of 140 height that contains a spring. On the beyblade receiving a heavy hit (from the opponent, the walls or even a bad launch), the top and bottom of the spin track would come apart slightly, allowing the spring to force it into the air for one powerful jump (though there may be a few bounces on landing). After this, the part would be approximately 150-160 in height and would likely react slightly abnormally to hits."

The idea was that it would provide a one shot attempt at toppling 230 height beys without being massively tall.
It may even be possible to make it smaller.
@ TheBestPegasus, A tip like that wouldn't do well in my opinion, first the wobbling of the "B" like part would lead up to the "cube" part coming into direct contact with the stadium, ending in the bey destablizing itself.
Dracomageat, The metal wheel's weight ( I am pretty sure) would not allow any air to come between the stadium and the bey with this track, the spring might even knock the bey it is on, off balance.
A rubber 230 would be cool for spin stealing on L drago and perseus
(Jun. 10, 2011  7:14 PM)Jacksonian Wrote: @ TheBestPegasus, A tip like that wouldn't do well in my opinion, first the wobbling of the "B" like part would lead up to the "cube" part coming into direct contact with the stadium, ending in the bey destablizing itself.

Yeah, it wouldnt work that well, it would be intresting to see how it works in terms of stamina.
I'd like to see a EWF(Eternal Wide Flat) for destablizing, it would give extra stamina with its free spinning and would go pretty fast when it's caught in the tornado ridges.

Also I'd like to see a ERD(Eternal Rubber Defence) just like the Jiraiya MS running core.

And a bottom with a small engine on the top-center of an ED(Eternal Defence) and a special launcher that has 2 buttons that makes the engine spin left or right, causing it to have better stamina.
Before I post, I'm admitting that most of mine will probably never come true.
Face: a solid metal face and a wood face LOL
CW: a perfectly balanced CW, a metal CW(you know it would be awesome, but it probably won't happen, because, you know, a little too overpowering), and an asymmetrical(I bet I spelled it wrong) CW for right spin
MW: actually, just a little chunk to fill in Basalt(again, overpowering, sorry)
Track: an MTH(Metal Triple Height)170(to reinforce it), R(Rubber)230(just a 230 made of rubber), and 80
Bottom: wow, so many options! Maybe WRF(Wide Rubber Flat), WMF(w/ a shorter height), RD(Rubber Defense), and XD(eXtreme Defense)
engine gear would be awesome and a spin track that releases blades when it's about to stop spinning would be cool kinda of like F: D
ECWB
Ethernal Coath Wideball
a ethernal spike serounded with a wide ball, the bottom of the wideball is PC and the top half is made of rubber.
when it gets hit normally it enables the PC part of the ball. When hit very hard it enables the rubber part of the ball with more grip. its a mostly stamina/defence part and a bit off attack also due to the ball shape.
RHF/CS Rubber Hole Flat/Coat Sharp
Like aquario's HF/S tip but with rubber the name explains pretty much what it is.
Its would be really helpful to change from full attack to a balance

Also a F:C final change. Uses the same way F: D and F: S but with changing from 195 to 170. It would be crazy putting a basalt wheel on and it smashes the other bey during the height change.

RC Rubber Claw 145
It might make a good defence against low attackers

EF eternal flat my brother's es is flat and it works pretty good

I would like to see a phantom fox for MFB
A circular metal wheel coated in rubber. Love the friction
A HMS running core with a Dragon Saucer subpart so I can have three Dragon Saucers on one beyblade.
(Jun. 09, 2011  4:58 AM)BeyFan Wrote:
(Jun. 06, 2011  7:41 PM)Jackeea Wrote:
(Jun. 06, 2011  2:12 PM)BeyFan Wrote: Metal Ball and Metal Flat already exist. MB was released with Poison Giraffe S130MB and MF was released with Screw Capricorn 90MF.

WTF is the Giraffe energy ring, S130 spin track, 90 spin track (OK I think that it's 9.0mm high) or the Screw fusion wheel?????
Are you serious? Have you not heard of Screw Capricorn 90MF and Poison Giraffe S130MB? They have been out for a long time...

No... i'm just familiar with Metal Fusion. Are those from Metal Masters?
(Jun. 13, 2011  8:27 AM)Jackeea Wrote:
(Jun. 09, 2011  4:58 AM)BeyFan Wrote:
(Jun. 06, 2011  7:41 PM)Jackeea Wrote:
(Jun. 06, 2011  2:12 PM)BeyFan Wrote: Metal Ball and Metal Flat already exist. MB was released with Poison Giraffe S130MB and MF was released with Screw Capricorn 90MF.

WTF is the Giraffe Clear Wheel, S130 track, 90 track (OK I think that it's 90mm high) or the Screw Metal wheel?????
Are you serious? Have you not heard of Screw Capricorn 90MF and Poison Giraffe S130MB? They have been out for a long time...

No... i'm just familiar with Metal Fusion. Are those from Metal Masters?

Yes ,they are or from Metal Fight Beyblade in Asia.
All my parts in my story.
Link: http://worldbeyblade.org/Thread-Wraith-s...acy?page=4
(Jun. 13, 2011  8:53 AM)sum 472 Wrote:
(Jun. 13, 2011  8:27 AM)Jackeea Wrote:
(Jun. 09, 2011  4:58 AM)BeyFan Wrote:
(Jun. 06, 2011  7:41 PM)Jackeea Wrote:
(Jun. 06, 2011  2:12 PM)BeyFan Wrote: Metal Ball and Metal Flat already exist. MB was released with Poison Giraffe S130MB and MF was released with Screw Capricorn 90MF.

WTF is the Giraffe Clear Wheel, S130 track, 90 track (OK I think that it's 90mm high) or the Screw Metal wheel?????
Are you serious? Have you not heard of Screw Capricorn 90MF and Poison Giraffe S130MB? They have been out for a long time...

No... i'm just familiar with Metal Fusion. Are those from Metal Masters?

Yes ,they are or from Metal Fight Beyblade in Asia.

When'll they be released in the UK?
(Jun. 13, 2011  11:37 AM)Jackeea Wrote:
(Jun. 13, 2011  8:53 AM)sum 472 Wrote:
(Jun. 13, 2011  8:27 AM)Jackeea Wrote:
(Jun. 09, 2011  4:58 AM)BeyFan Wrote:
(Jun. 06, 2011  7:41 PM)Jackeea Wrote:
(Jun. 06, 2011  2:12 PM)BeyFan Wrote: Metal Ball and Metal Flat already exist. MB was released with Poison Giraffe S130MB and MF was released with Screw Capricorn 90MF.

WTF is the Giraffe Clear Wheel, S130 track, 90 track (OK I think that it's 90mm high) or the Screw Metal wheel?????
Are you serious? Have you not heard of Screw Capricorn 90MF and Poison Giraffe S130MB? They have been out for a long time...

No... i'm just familiar with Metal Fusion. Are those from Metal Masters?

Yes ,they are or from Metal Fight Beyblade in Asia.

When'll they be released in the UK?

and the US...
(Jun. 13, 2011  11:37 AM)Jackeea Wrote: When'll they be released in the UK?
(Jun. 13, 2011  2:39 PM)toatanu Wrote: and the US...

Only chance that Poison Giraffe S130MB has of getting released in those countries is if Hasbro makes the bey and puts it in their double packs.

So...it might never be a bey that gets released in the US and UK. Might remain a bey that you can only get off an online seller (dimsum2u actually sells it in the set it belongs to, BB-86).
(Jun. 13, 2011  3:06 PM)BeyFan Wrote:
(Jun. 13, 2011  11:37 AM)Jackeea Wrote: When'll they be released in the UK?
(Jun. 13, 2011  2:39 PM)toatanu Wrote: and the US...

Only chance that Poison Giraffe S130MB has of getting released in those countries is if Hasbro makes the bey and puts it in their double packs.

So...it might never be a bey that gets released in the US and UK. Might remain a bey that you can only get off an online seller (dimsum2u actually sells it in the set it belongs to, BB-86).

I still don't know what half of the pieces are or do, like S130...
S130 is a 130 height track with a "shield".
Anyway, to get back on topic... What about SP145? It's a 14.5mm high track with a spring inside it to make it bounce!
Or ED Performance tip? Shaped like Defence, but free spinning?
Or even TS? Triple Spike? 3 spikes arranged in a row?
(Jun. 14, 2011  7:52 PM)Jackeea Wrote: Or ED Performance tip? Shaped like Defence, but free spinning?

That's kind of already a real part... Killer Beafowl UW145EWD...

Eternal Wide Defense
Jackeea: You mean a slightly taller J140 (see my previous posts) without the trigger mechanism?

@iBeyblader: no, he wants the smaller version.
(Jun. 14, 2011  7:52 PM)Jackeea Wrote: Anyway, to get back on topic... What about SP145? It's a 14.5mm high track with a spring inside it to make it bounce!
Or ED Performance tip? Shaped like Defence, but free spinning?
Or even TS? Triple Spike? 3 spikes arranged in a row?

you mean 145mm and bouncing beys suck cause they have to be really tall and it gets awkward like trygle
No, he means 14.5 a 145mm tall spintrack would be over 14 centimetres and thus HUGE. Also, HMS Hopper (AKA Einstein) was a good beyblade so clearly not all bouncing beys suck. They have their uses too, my J140 part was designed specifically to counter 230 tracks.