+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Off-Topic Forums (https://worldbeyblade.org/Forum-Off-Topic-Forums)
+--- Forum: Your Creations (https://worldbeyblade.org/Forum-Your-Creations)
+--- Thread: 3D printed B-daman (/Thread-3D-printed-B-daman)
Pages:
1
2
3D printed B-daman - WolkaiserDrake - Apr. 17, 2019
Hello, as the name states, this is a thread for 3D printable models of B-daman, regardless of the generation, if you have any ideas or even models your self, then please by all means show them, I myself am working on making a set of parts that would allow crossfire/ES cores be equipped with zero system parts, so if you have any input for this little project or have your own ideas, please show them
RE: 3D printed B-daman - MagixG - Apr. 17, 2019
a B-Daman thread... in the world BEYBLADE organization. genius
RE: 3D printed B-daman - WolkaiserDrake - Apr. 17, 2019
just to post an example of what I have to show
https://sta.sh/026e5rfn92an
https://sta.sh/0gwapwps6gc
https://sta.sh/010vmazltzge
my custom armor set for an IBA core based upon a triceratops that I have named Dyna Driceta, named after the unreleased ES B-daman Dyna triptess who is also a triceratops in design , the base model used was a Helio Breaker made by the sketchfab user Nadzmi Hazizi, whom has given permission to edit his work to printable
I am also working on making a DHB (direct hit battle) armor set for use with ES and Crossfire cores along with trying to work out a way to attach IBA parts to a cross fire core, I have no access to a 3D printer nor accurate measuring tools, so I am having to work by eye for most of my models, I will post screen shots of what I have worked on so far in a later post if asked
RE: 3D printed B-daman - Garvin prime - Apr. 18, 2019
(Apr. 17, 2019 4:19 PM)MagixG Wrote: a B-Daman thread... in the world BEYBLADE organization. genius
You DP kinda also works with expressions, but let’s stay on topics.
RE: 3D printed B-daman - WolkaiserDrake - Apr. 18, 2019
my first attempt at making arm adapters, isnt the best, and its clear to see,
https://sta.sh/014sodotisl7
https://sta.sh/03jkqa0mwix
the idea was just a simple socket and peck, I will freely admit Iam not good at making things to be printed, this is my first actual 3D printing project.
essentially what is needed to be done is for a recreation of the arm socket (the inside of the arm) or a recreation of the core housing itself to be made, then from that it would need a modified bolt, cut down at the least so that it doesn't intrude on armor parts or head armor from the zero system
https://sta.sh/0fvqnr4ejpj
an alternative for this would be
https://sta.sh/01jyxsvszh17
A: to have the arm post set on the bolt itself in the same orientation as an IBA core, this would be the most desirable due to some parts from the ZERO system requiring to parallel with both the body and the surface it stands upon
B: option B would have the post set at the same angle as the core port, this would keep in theme with cross fight/ES and is the most likely to be done, but would also interfere with parts from black knight and Shield giga to name some examples, as shown both ideas have a part to hold the core together in a similar manner to the arm, but also cut down bolt,
the only other way for this concept to work would be to make either a frame to wrap around the back and arm ports like that is an OS gear or the cannon arms from Garruburn.
again these are only ideas, sadly I can not put them into practice due to a lack of parts and access to a printer
RE: 3D printed B-daman - S00las - Apr. 19, 2019
If someone actually 3D prints this stuff, that's awesome. I have a few friends with 3D printers and they would love to try this out.
RE: 3D printed B-daman - WolkaiserDrake - Apr. 19, 2019
(Apr. 19, 2019 1:50 AM)S00las Wrote: If someone actually 3D prints this stuff, that's awesome. I have a few friends with 3D printers and they would love to try this out.
thank you for the enthusiasm, but sadly the files are far from ready, at some point it will be possible, but not in the eminent future, but I will be working on the parts on as regular basis as possible
RE: 3D printed B-daman - Kogami - Apr. 21, 2019
>RE: B-Daman thread in WBO
To be fair, the "main" B-Daman forums is...dead? Offline? (I can't seem to access it) while the B-Daman megathread only have one post in 2019.
Great 3D sculpting right there though! I'd love to see the final result.
RE: 3D printed B-daman - WolkaiserDrake - Apr. 21, 2019
(Apr. 21, 2019 2:46 PM)Kogami Wrote: >RE: B-Daman thread in WBO
To be fair, the "main" B-Daman forums is...dead? Offline? (I can't seem to access it) while the B-Daman megathread only have one post in 2019.
Great 3D sculpting right there though! I'd love to see the final result.
I did try and find a more suitable place to make this thread, but no luck, there was a thread from what I know on the wiki forum to do with 3D printed parts, it shows up in the google search, but its a blank page, so I had to settle for WBBO, witch in a way is a more suitable place due to the number of users who already do 3D modeling, and I believe there are a good number who still enjoy B-daman, so yeah, I understand this is a beyblade forum, but there area number of threads to do with other topics here.
once Iv finished the tail/staybalizer, I an try and see about getting the parts for Driceta measured for an IBA core, as long as I can get the hole measurements for the arms and feet then I can work from there, but making arm adapters from a cross fire core is going to be the challenge.
if you have any input that would very helpful
RE: 3D printed B-daman - DeceasedCrab - Apr. 21, 2019
Way back in my youth I got a Bomberman B-Daman toy from a quarter vending machine. I had absolutely no idea B-Daman was a thing until you posted this. Wonder if I still have that lying around.
RE: 3D printed B-daman - McGameMaster - Apr. 21, 2019
Well look at this it is the proto 01 from the B-Daman crossfire anime https://www.tinkercad.com/things/10zalGzl2hd-b-daman-crossfire-proto-01 I also turned B-Damans from it into Beyblades but I have not finished some or even worked on the other from the show
RE: 3D printed B-daman - WolkaiserDrake - Apr. 21, 2019
(Apr. 21, 2019 6:58 PM)McGameMaster Wrote: Well look at this it is the proto 01 from the B-Daman crossfire anime https://www.tinkercad.com/things/10zalGzl2hd-b-daman-crossfire-proto-01 I also turned B-Damans from it into Beyblades but I have not finished some or even worked on the other from the show
thats not proto 01, its from what I know based upon the super b-daman line, the trigger section slides into the body, its on thingiverse by the use erqtqdf
https://www.thingiverse.com/thing:3299589
but this is in theme with the thread, just not presently topical, but maybe down the line
RE: 3D printed B-daman - WolkaiserDrake - Apr. 24, 2019
I know this maybe a really stupid idea, but just hear me out for this one, Quivervision is an augmented reality app that uses coloring pages just like the QR codes that generate 3D models, they have a section for B-daman, though it is limited, they have dracyan and rising dracyan, sonic dravise, stream drazeros, garruburn, rayddra and gataling deathshell.
now what Im thinking is, if someone were to be able to extract the 3D models of at least one of the B-daman from the app, then it might be pissoble to use the model as a base to make parts for cross fire and ES, though they are low poly, and now all of the details are there, but it would be a starting point, with the core it would possible to scale it to actual size and dimensions to then start making arm and leg adaptors, the head would be a good start for custom/original designs, but the clips needed to hold them in place would need to be made, the larms and legs dont have the holes for the parts to actually work, but they do have the indentations for them to fit
https://www.youtube.com/watch?v=JfqrnNBcJDo
again, this is only an idea, and from what I know no-one has done this, I myself cant due to mot having the know how or software to do so, if some one could do this that would be wonderful, but it is only an idea as of now that I wanted to share
RE: 3D printed B-daman - WolkaiserDrake - Apr. 29, 2019
ok, here the first test part for a DHB set for CF/ES
https://sta.sh/01kq7d4pnzpj
a simple hopper, yes its the DHB hopper flipped upside down with the shield sight set at an angle, I want the hopper to align like it would on an IBA core, so I had to flip it, and the same goes for the sight.
the model was made using the mag addaptor made by https://www.thingiverse.com/Leotoy/about LEOTOY, who on their youtube channle has shown a leg part based upon a tank for the CF/ES cores, that would be rather handy to make the DHB feet work, it would serve well as a template for the port, and the hopper and sight were from the DHB model made by Nadzmi Hazizi on sketchfab
now I know its not the best but please bear with me here, this is a prototype, prototypes dont always work or look the best, so please dont be too harsh, yes give your critics but dont just write it off before even testing has been done, speaking of, if you do print this, then please send back photos and if possible a video so we can see how it preforms and to see what alterations need to be made.
https://sta.sh/0mza7i45a2
the parts are all in one file so you will need to separate them, the adapter and the hopper are separate but are meant to be one part, same for the inner core/tube, the parts may need resizing, again this is my first time making printing files, so I dont know if they will work, so please if you can help out with this, then pleas by all means do so.
RE: 3D printed B-daman - WolkaiserDrake - May. 08, 2019
inbetween the battle B-daman line and the CF/ES lines there was the Pen B line, a set of B-daman based on penguins, now I dont have one of these, but when ever I looked at then, I always had this nagging thought in the back of my head that they were the middle ground for what I had planned, they could fit mags and barrels from the CF line, but looked as though they had the legs and arm section for the battle line, they even made changeable Armour parts.
this little twitter post kinda helps solidify what I know now
https://twitter.com/t6z9cAxx3rMmtv0/status/1115769933504237575
the user placed one fo the electronic DHB barrels on the Pen-B to see it it fit, a second user used a standard version of the DHB, though they did say it needed some cutting to work, this does help towards my project, and confirm a thought I've had for a few years now, if I had a Pen-B B-daman I would be able to do some actual tests to see what parts fit, but I sadly dont as of yet, now this isnt the intended idea of Battle gen parts fitting the CF/ES line, but it is a middle ground of sorts, its an IBA core that can fit CF parts, a little bit in the reverse of what I had in mind, but it still prove the idea can work
RE: 3D printed B-daman - WolkaiserDrake - May. 22, 2019
I was able to make a small modifitation to the IBA core's head and realigned it along with adding 2 clips to attack it to a core, again I dont know if it works, so I would need someone to test it for me, I think I might have to shoot either AT2 or LEOtoys an email with the files, or maybe ask if slash west has access to a printer.
but any ways,
https://sta.sh/024gy72c8jls
heres the head part, so far
https://sta.sh/0xx42ysj8ii
and hears the file, again it would need some edits for measurements and such, if I had a model of a CF/ES b-daman I would just simply break it down and work from there, but untill I find a model, I have to fudge my way through, or until some one shows me up and makes the parts anyway, till then, Il just do what I do
RE: 3D printed B-daman - WolkaiserDrake - Jun. 11, 2019
hello once again, I know I'm literally talking to no one, but I feel like talking.
https://sta.sh/015ph29tm0ew
here is the most recent version of my IBA core head fore the CF/ES line, again the main head is made using Nadzmi Hazizi's models, the back section on the other hand was made using the Plug In adapter from here https://www.thingiverse.com/thing:3664911 as a base, it took a few days to scale the new mag well to the head and to make the little clips on the bottom, https://sta.sh/0uep1q0vobt
here is the blender file https://sta.sh/0dzfcd4h153
and here is the OBJ https://sta.sh/0hnsndblax4
if one of you would be willing to scale the head part to fit a cross fire core then that would be very helpful, I need to know it fits the cores and if you can still fit Battle B-daman armor on to it, I know this is most likely falling on deaf ears, but still, Il make the post.
RE: 3D printed B-daman - Sebbir - Aug. 20, 2019
Hey WolkaiserDrake
I have made an account on this forum just to post this. I really like the project you are doing. The idea of 3D printing B-Daman parts is seriously cool and i really hope you dont give up on it. Im actually really impressed that you have kept posting when you have been met with so little feedback. Thats some fortitude right there. Eventhough i know nothing about 3D printing you have really inspired me and now im considering actually getting into it. Im looking forward to see the end of your project and wish you the best.
Keep it up!
RE: 3D printed B-daman - WolkaiserDrake - Aug. 24, 2019
(Aug. 20, 2019 3:14 PM)Sebbir Wrote: Hey WolkaiserDrake
I have made an account on this forum just to post this. I really like the project you are doing. The idea of 3D printing B-Daman parts is seriously cool and i really hope you dont give up on it. Im actually really impressed that you have kept posting when you have been met with so little feedback. Thats some fortitude right there. Eventhough i know nothing about 3D printing you have really inspired me and now im considering actually getting into it. Im looking forward to see the end of your project and wish you the best.
Keep it up!
thank you very much, I have no intentions of dropping this project, its just that I have duties to do at home, my family have been sorting the house for the past few months now, we recently gutted my carport/workshop, and are working to re-model our kitchen, we are also doing work in our garden, and well, I have to be on hand for this, I will be attending college for my 7th year in the next few weeks so that will slow me down again, but once Ive got some form of update I will post about it, its just circumstance's are not on my side presently, but I fully intend on continuing my progress on this.
RE: 3D printed B-daman - Sebbir - Aug. 25, 2019
Well in that case i will be looking forward to when you have an update
RE: 3D printed B-daman - WolkaiserDrake - Dec. 10, 2019
due to college work and home life I have not been able to devote any time to making any 3D model for this thread, though that does not mean I haven't had a few ideas
1, gundam themed armour sets based upon SD gundams, Exia and unicorn I do want to make, Exia because the chest already looks like a B-daman, and the unicorn becuase I have a silly idea to make the shields into a barrel
2, make alternative renditions of the core B-daman from the show, I.E. cobalt blade, wing ninja and the like, this would mean I would need a bloody kaiser model
3, try and make my own core part, this one would be tricky, but also fun
these are just the more plausible ideas Iv'e had, but again I dont have the time to put towards them at this time, and again, sorry for any delays
RE: 3D printed B-daman - WolkaiserDrake - Jan. 24, 2020
I have recently gotten a digital caliper, this now means I can try and make more accurate measurements for parts, though I will still be unable to print and test them
RE: 3D printed B-daman - snoc - Jan. 26, 2020
Wait, I thought I was the only existing b-Daman fan! I never see any these days.
RE: 3D printed B-daman - WolkaiserDrake - Jan. 26, 2020
(Jan. 26, 2020 2:21 PM)snoc Wrote: Wait, I thought I was the only existing b-Daman fan! I never see any these days.then you may not have looked very far, we are there, you just need to find us
RE: 3D printed B-daman - snoc - Jan. 26, 2020
(Jan. 26, 2020 10:46 PM)WolkaiserDrake Wrote:(Jan. 26, 2020 2:21 PM)snoc Wrote: Wait, I thought I was the only existing b-Daman fan! I never see any these days.then you may not have looked very far, we are there, you just need to find us
I've looked everywhere but to no avail. well almost everywhere it seems.