+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade Products (https://worldbeyblade.org/Forum-Beyblade-Products)
+--- Thread: Product B-31 Starter Yggdrasil Ring Gyro (/Thread-Product-B-31-Starter-Yggdrasil-Ring-Gyro)
RE: B-31 Starter Yggdrasil Ring Gyro - NEET no Kami - Feb. 15, 2016
i hope they release a recolour of the beyblade, as the colour is not that appealing.
the launches the guy did weren't that great, so i hope when it gets released someone can actually test it's stamina with a bey-launcher properly.
i'm gonna guess the tip is like the one from burning kerberous, as it's seen circling around the stadium., instead staying in the middle.
RE: B-31 Starter Yggdrasil Ring Gyro - smash attacker - Feb. 15, 2016
I have a feeling yggdrasil would look like groot from guardians of the galaxy
RE: B-31 Starter Yggdrasil Ring Gyro - Ryuk_Shinigami - Feb. 15, 2016
(Feb. 15, 2016 6:42 PM)smash attacker Wrote: I have a feeling yggdrasil would look like groot from guardians of the galaxy
I am Yggdrasil !!!
RE: B-31 Starter Yggdrasil Ring Gyro - BLASTERJOKER - Feb. 16, 2016
The layer looks like cross dranzer in my opinion. Also I like the "bearing" bottom idea for any beyblade meaning more rom and longer spin
RE: B-31 Starter Yggdrasil Ring Gyro - Kai-V - Feb. 17, 2016
A big picture of Gyro :
[Image: HQB7LG9.png]
Hm, that swirly thing makes it look like either the very tip is free-spinning, or somehow the swirl is the end of the immobile part, like excess plastic that serves no purpose and the core is longer and free-spinning.
It looks like there could be some metallic line in the centre, but I am not sure about full bearings just from that image ...
RE: B-31 Starter Yggdrasil Ring Gyro - Burst - Feb. 17, 2016
Hey,
That really Looks Beautiful !!!! By the way if someone has noticed the Release Date in Takara Tomy Mall Is Feb 20th and not Feb 22th. 2 days prior thats good !!!
Nice to see its official Photos I was waiting for it.
Thanks Kai.
Cheers !!!
Burst.
RE: B-31 Starter Yggdrasil Ring Gyro - Jinbee - Feb. 17, 2016
I don't really mind, this driver looks really nice!
Thanks Kai-V.
RE: B-31 Starter Yggdrasil Ring Gyro - OkinawamTS - Feb. 17, 2016
for info Feb 22th is the date that I said that I will ship it from, but it has never been the TakaraTomy official release date which it has always been Feb 20th.
(Feb. 17, 2016 3:36 PM)Burst Wrote: Hey,
That really Looks Beautiful !!!! By the way if someone has noticed the Release Date in Takara Tomy Mall Is Feb 20th and not Feb 22th. 2 days prior thats good !!!
Nice to see its official Photos I was waiting for it.
Thanks Kai.
Cheers !!!
Burst.
RE: B-31 Starter Yggdrasil Ring Gyro - Burst - Feb. 17, 2016
Oh thanks for the information friend. Actually at first I saw 22nd Feb at the post and then saw the Date that it was 20th on Takara-Tomy Website,so I thought they prepone the date Thats okay not a problem.
Thanks for clearing that.
Cheers !!!!
Burst.
RE: B-31 Starter Yggdrasil Ring Gyro - MissingNo. - Feb. 17, 2016
I really like the swirly thing around the bottom.
But, I don't understand how it will be possible to hold the tip like advertised in the magazine.
RE: B-31 Starter Yggdrasil Ring Gyro - Kai-V - Feb. 17, 2016
Exactly, the swirl makes the whole stick seem like one immobile piece, so either the pivotal point is right below the big base of the Driver, or as I mentioned, the bottom two centimetres of the tip are what spins freely and you need to have a great grip on that small portion to be able to make the rest spin above your hand ...
RE: B-31 Starter Yggdrasil Ring Gyro - Bey Brad - Feb. 17, 2016
(Feb. 17, 2016 4:37 PM)Kai-V Wrote: Exactly, the swirl makes the whole stick seem like one immobile piece, so either the pivotal point is right below the big base of the Driver, or as I mentioned, the bottom two centimetres of the tip are what spins freely and you need to have a great grip on that small portion to be able to make the rest spin above your hand ...
Pretty much certain that's the case.
Whatever, ordered mine. Pumped!
RE: B-31 Starter Yggdrasil Ring Gyro - Burst - Feb. 17, 2016
(Feb. 17, 2016 4:38 PM)Bey Brad Wrote:Ordered. Wow Super Spead !!!!!! By the way from where did you order Brad ?(Feb. 17, 2016 4:37 PM)Kai-V Wrote: Exactly, the swirl makes the whole stick seem like one immobile piece, so either the pivotal point is right below the big base of the Driver, or as I mentioned, the bottom two centimetres of the tip are what spins freely and you need to have a great grip on that small portion to be able to make the rest spin above your hand ...
Pretty much certain that's the case.
Whatever, ordered mine. Pumped!
So how much pieces are you planning to get?
Cheers !!!!
Burst.
RE: B-31 Starter Yggdrasil Ring Gyro - Bey Brad - Feb. 17, 2016
amazon.jp. Just one for now.
RE: B-31 Starter Yggdrasil Ring Gyro - Burst - Feb. 17, 2016
(Feb. 17, 2016 5:08 PM)Bey Brad Wrote: amazon.jp. Just one for now.Thanks Brad for the Information. Hope You Receive it soon. Even the Stadium and Support rubbers are listed on amazon.co.jp
Cheers !!!
Burst.
RE: B-31 Starter Yggdrasil Ring Gyro - MissingNo. - Feb. 17, 2016
If you compare it to Survive, you can clearly see a metal shaft in the bottom. It's just an ES replica.
RE: B-31 Starter Yggdrasil Ring Gyro - Cake - Feb. 17, 2016
(Feb. 17, 2016 6:41 PM)MissingNo. Wrote: If you compare it to Survive, you can clearly see a metal shaft in the bottom. It's just an ES replica.
B : D uses a metal shaft to connect the tip to the actual bearing, so it's still possible that the bearing could be in there, mounted higher up where it's not visible through the thick plastic.
RE: B-31 Starter Yggdrasil Ring Gyro - Kei - Feb. 17, 2016
(Feb. 17, 2016 6:41 PM)MissingNo. Wrote: If you compare it to Survive, you can clearly see a metal shaft in the bottom. It's just an ES replica.
Whether there is or isn't a bearing, it should probably be better than ES was though because the tip doesn't appear to be sharp.
RE: B-31 Starter Yggdrasil Ring Gyro - Hato - Feb. 17, 2016
Here is a picture I cropped from the manga;
[Image: 2i0ac7l.jpg]
Maybe it is ES. ;_____;
RE: B-31 Starter Yggdrasil Ring Gyro - Kai-V - Feb. 17, 2016
Not really, because no matter what, as was mentioned, the surface that spins freely is much larger than what ES had and it is not a sharp tip.
RE: B-31 Starter Yggdrasil Ring Gyro - Hato - Feb. 17, 2016
Haha, true. Just afraid that Takara Tomy will screw this up and not give this a bearing.
Either way, I'll still be trying to get this! ^__^
RE: B-31 Starter Yggdrasil Ring Gyro - Flame~Capricorn - Feb. 17, 2016
It is very faint, but i can see a bearing system near the bottom of the driver. so pumped!
RE: B-31 Starter Yggdrasil Ring Gyro - mudorios - Feb. 18, 2016
either way, im just gonna hope that ______ Heavy Gyro won't be OP.
RE: B-31 Starter Yggdrasil Ring Gyro - Kei - Feb. 18, 2016
(Feb. 17, 2016 9:24 PM)Hato Wrote: Haha, true. Just afraid that Takara Tomy will screw this up and not give this a bearing.
If they don't, you know there will be a bearing Driver eventually!
RE: B-31 Starter Yggdrasil Ring Gyro - TL14 - Feb. 18, 2016
In this pictures you can see that Gyro has the shape of a T125ES but in the sketch it has the shape of B
or AS. http://vignette2.wikia.nocookie.net/beyblade/images/b/bb/BurstC08-35.jpg/revision/latest?cb=20160217171547http://beyblade.wikia.com/wiki/File:BurstC08-28.jpg
This intire Bey reminds me of Flame Libra T125ES because:
1. The layer is green and orange and has the shape of the Flame metal wheel and the libra clear wheel (maybe also RockBison/Gigars/Draciel)
2. Ring creates Centrifugal force like T125
3. Gyro has the slopes like T125
4. Gyro looks like an ES