World Beyblade Organization by Fighting Spirits Inc.
Indian Beyblade Burst Release Thread:- Information (List) and News - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade General (https://worldbeyblade.org/Forum-Beyblade-General)
+--- Thread: Indian Beyblade Burst Release Thread:- Information (List) and News (/Thread-Indian-Beyblade-Burst-Release-Thread-Information-List-and-News)



RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Adarsh Abhinav - Dec. 11, 2018

(Dec. 11, 2018  10:38 AM)Mohith0412 Wrote:
(Dec. 11, 2018  9:52 AM)Psysai Wrote: Thanks for the info.?


The same day after 7-8 hours

Hey If anyone else has got legend spriggan and requiem. Can they confirm if the teeth on lS is stronger than sR?
Cause I think I have received a bad mold of requiem, my legend spriggan is beating requiem without any clicks. Really bummed out. Is this the same case with anyone else?

My friend got X3 and his teeth are also bad.
Whereas the teeth on Satomb are very good.

Obviously lS teeth are better than sR... Im not sure abt Sr tho... XD

(Dec. 11, 2018  7:35 AM)Adarsh Abhinav Wrote: 1. Hasbro Made a Wrecked gV and called it Strike Genesis Valtryak, But it had it's gimmick, And Chip too
2. chips were only available via mail order stuff 
3. If tN comes here then we will get ultimate reboot. But if this wave isn't successful, we won't be getting Beyblade till next generation, which is most likely since anime is not anytime soon.

Till now, frm the looks of it... This wave is a bit too succesful fr my liking...

Any idea what is the best mold fr requiem? (like A1, A2, etc...)

a1, and Sr has better teeth, Dunno what's going on. OR wait, is that  just burst resistance.
Hey guys, I will confirm soon, getting almost everything in this wave. BTW, Rendage will do that before me


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - karthik20066002 - Dec. 11, 2018

Are cho z beys available


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Turbo blader - Dec. 11, 2018

(Dec. 11, 2018  12:56 PM)karthik20066002 Wrote: Are cho z beys available

Man, it's god beys wave 1 , no chance of cho Z beys!


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Muhir - Dec. 11, 2018

I also Have unboxed valtreyk v3!
https://youtu.be/fHP4GsGoTeA


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - karthik20066002 - Dec. 12, 2018

(Dec. 11, 2018  1:02 PM)Are you serious Wrote:
(Dec. 11, 2018  12:56 PM)karthik20066002 Wrote: Are cho z beys available

Man, it's god beys wave 1 , no chance of cho Z beys!

Damn it ?????


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Turbo blader - Dec. 12, 2018

(Dec. 12, 2018  12:58 PM)karthik20066002 Wrote:
(Dec. 11, 2018  1:02 PM)Are you serious Wrote: Man, it's god beys wave 1 , no chance of cho Z beys!

Damn it  ?????

Maybe  it can come in end of 2019...


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - ThePheonix - Dec. 12, 2018

(Dec. 12, 2018  1:08 PM)Turbo blader Wrote:
(Dec. 12, 2018  12:58 PM)karthik20066002 Wrote:
Damn it  ?????

Maybe  it can come in end of 2019...

Hasbro is stopping Burst by the end of 2019... i think...


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Mohith0412 - Dec. 12, 2018

(Dec. 12, 2018  1:12 PM)ThePheonix Wrote:
(Dec. 12, 2018  1:08 PM)Turbo blader Wrote: Maybe  it can come in end of 2019...

Hasbro is stopping Burst by the end of 2019... i think...

Lol...that's what u get fr taking out metal from beys which are supposed to be made of metal.


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Turbo blader - Dec. 12, 2018

But Indian beys will have metal..
I am Damn sure...


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Adarsh Abhinav - Dec. 12, 2018

(Dec. 12, 2018  1:12 PM)ThePheonix Wrote:
(Dec. 12, 2018  1:08 PM)Turbo blader Wrote: Maybe  it can come in end of 2019...

Hasbro is stopping Burst by the end of 2019... i think...

TT packaging always welcomed


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Mohith0412 - Dec. 12, 2018

(Dec. 12, 2018  2:50 PM)Adarsh Abhinav Wrote:
(Dec. 12, 2018  1:12 PM)ThePheonix Wrote: Hasbro is stopping Burst by the end of 2019... i think...

TT packaging always welcomed
Im damn sure we will get funskool packing itself. Bcoz if hasbro dies, funskool will still exist. So same packaging..

https://i.postimg.cc/zDwqCjgF/Screenshot-2018-12-12-20-37-11-062.jpg
Lol first time kS is getting close to selling out.

How good of a seller is t for toys?


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - renidage - Dec. 12, 2018




RE: Indian Beyblade Burst Release Thread:- Information (List) and News - dranzer blader - Dec. 13, 2018

So here’s my first evolution battle this Legend Spriggan is just epic it doesn’t even burst by hand spin of lost longinus


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Turbo blader - Dec. 13, 2018

(Dec. 13, 2018  4:50 PM)dranzer blader Wrote:
So here’s my first evolution battle this Legend Spriggan is just epic it doesn’t even burst by hand spin of lost longinus

The battle was good... But does your S2 bad teeth or worst teeths?


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Adarsh Abhinav - Dec. 13, 2018

S2 has third worst teeth after aB and mG


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Mohith0412 - Dec. 13, 2018

(Dec. 13, 2018  6:20 PM)Adarsh Abhinav Wrote: S2 has third worst teeth after aB and mG

Where is W2? Coz mine is veerrrryyy much weaker in clicks than my friends S2. That vould ne bcoz my wyvern mold is A4.


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - dranzer blader - Dec. 14, 2018

(Dec. 13, 2018  5:55 PM)Turbo blader Wrote:
(Dec. 13, 2018  4:50 PM)dranzer blader Wrote:
So here’s my first evolution battle this Legend Spriggan is just epic it doesn’t even burst by hand spin of lost longinus

The battle was good... But does your S2 bad teeth or worst teeths?
No bro my S2 is really strong it can even burst god Valkyrie but it looses to only 1 bey which lS it can burst all the beys that I have currently except lS even gV can get bursted by it

(Dec. 13, 2018  5:55 PM)Turbo blader Wrote:
(Dec. 13, 2018  4:50 PM)dranzer blader Wrote:
So here’s my first evolution battle this Legend Spriggan is just epic it doesn’t even burst by hand spin of lost longinus

The battle was good... But does your S2 bad teeth or worst teeths?
No bro my S2 is really strong it can even burst god Valkyrie but it looses to only 1 bey which lS it can burst all the beys that I have currently except lS even gV can get bursted by it


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - renidage - Dec. 14, 2018




RE: Indian Beyblade Burst Release Thread:- Information (List) and News - GOD CHIPS - Dec. 14, 2018

(Dec. 13, 2018  6:43 PM)Mohith0412 Wrote:
(Dec. 13, 2018  6:20 PM)Adarsh Abhinav Wrote: S2 has third worst teeth after aB and mG

Where is W2? Coz mine is veerrrryyy much weaker in clicks than my friends S2. That vould ne bcoz my wyvern mold is A4.

Due to the round like shape of W2 , it doesn't gets bursted that easily . my combo W2.knuckle.Weight is somewhat hard to burst . Vs my V2.Spread.Orbit


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Adarsh Abhinav - Dec. 14, 2018

(Dec. 14, 2018  6:18 PM)GOD CHIPS Wrote:
(Dec. 13, 2018  6:43 PM)Mohith0412 Wrote: Where is W2? Coz mine is veerrrryyy much weaker in clicks than my friends S2. That vould ne bcoz my wyvern mold is A4.

Due to the round like shape of W2 , it doesn't gets bursted that easily . my combo W2.knuckle.Weight is somewhat hard to burst . Vs my V2.Spread.Orbit

I see too sqauares stacked when I think of W2. And teeth are similar to aB or wait, is it opposite?
K2 was far better


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - GOD CHIPS - Dec. 14, 2018

(Dec. 14, 2018  6:21 PM)Adarsh Abhinav Wrote:
(Dec. 14, 2018  6:18 PM)GOD CHIPS Wrote: Due to the round like shape of W2 , it doesn't gets bursted that easily . my combo W2.knuckle.Weight is somewhat hard to burst . Vs my V2.Spread.Orbit

I see too sauares stacked when I think of W2. And teeth are similar to aB or wait, is it opposite?

Have you forgotten the MOST recoil heavy BAD teeth layer i.e Hazard Kerbeus (except KEVO's )


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - GOD CHIPS - Dec. 15, 2018

Congrats to @[Mohith0412] for getting Legend Spriggen !


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Turbo blader - Dec. 15, 2018

(Dec. 15, 2018  2:19 PM)GOD CHIPS Wrote: Congrats to @[inferno blader] for getting Legend Spriggen !

Who'se that guy?


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Adarsh Abhinav - Dec. 15, 2018

I am Doing a giveaway. And I am getting my Order on 17 perhaps


RE: Indian Beyblade Burst Release Thread:- Information (List) and News - Mohith0412 - Dec. 15, 2018

(Dec. 15, 2018  2:19 PM)GOD CHIPS Wrote: Congrats to @[inferno blader] for getting Legend Spriggen !

That wiil be me... U might want to edit that post in case there is an actual inferno blader in wbo... It will be weird... And its actually my buddy @[StarSlasher367]'s bey... He is my friend who shares the channel for making videos. He might not be there for a few, as I have more experience than him in both beyblade and youtube, so when he is absent i sometimes make vids like the first 7 vids on my channel. But he isnt that experienced in youtube. He is learning fast, but i cant trust him for a video in which he is alone YET. But maybe soon. He never is on wbo and the account is just fr namesake... So i can tag him whenever i want and he wont have a clue.