(Jun. 21, 2014  4:32 PM)Neo~ Wrote:

(Jun. 21, 2014  4:31 PM)MasterSwordsman Wrote:

(Jun. 21, 2014  9:42 AM)Neo~ Wrote: Then try making a simple all circular Beyblade.

good idea, and the fact that there are no rivits that cause wind resistance means that it will have pretty good stamina.

And start maybe with an all metal 230 track, and metal WD.
That's simpler.

(Jun. 21, 2014  6:17 PM)Kalthesuperior Wrote: [Image: 1403370267322.jpg]
So I found this in the playground half buried in the sandbox. A completely round scythe wheel that allows dual spinning.

Actual scythe wheels aren't completely round and only allow right spin, I think.

(Jun. 21, 2014  6:30 PM)CHOSENBEYBLADER Wrote: Take off a plastic ring of a dragoon g and put it on dark bull spin track then put on a earth metal with a libra plastic and put on a metal face and the tip should be a RDF(rubber defence flat )this combo is BEAST

(Jun. 21, 2014  6:38 PM)MidnightGFX Wrote:

(Jun. 21, 2014  6:17 PM)Kalthesuperior Wrote: [Image: 1403370267322.jpg]
So I found this in the playground half buried in the sandbox. A completely round scythe wheel that allows dual spinning.

Actual scythe wheels aren't completely round and only allow right spin, I think.

Yes, they're only supposed to spin right.

From what I know, Beyblades that spin in both directions that aren't supposed to are from a fake brand. In this case, this would probably be from Rapidity, a fake brand that nobody under any circumstance should buy off of.

Despite that, I found it quite cool that you were able to find it, hah.

Spoiler (Click to View)

Ok, now going on to what beys would be like if they were made of different metals
Magnesium:
ooooohhhh-ahhhhhhhhh, sparks, love em' magnesium sparks when it it hits another metal, so given how you would count that as fun, it is cool and not cool, good fact is they FREAKiNG SPARK, EPIC!!!!! not cool part is that that results in a fire hazard, or burn hazard. another not cool thing is that magnesium is brittle, and so it could snap more easily, and finally, magnesium is the LIGHTEST metal in existence, so beys would not spin as long, beys would weigh about 38% less than they do with the standard metal used.

Titanium:
Not bad, actually the bey would weigh roughly 44% more than it did before, given how titanium can bend crazy without losing shape, if could work for long-term use as well, only issue is titanium costs more than aluminum, so it would cost much more, beys that were about 21$ would cost about 30$, huge increase in price, right?

Chromium:
Ooh! Shiny!!!! chrome would be nice, its tougher than aluminum, and not to mention, shinier. It also would make fusion wheels weigh over 2 TIMES AS MUCH, which means the bey could battle for longer, which means that bey battle times would go from 2-5 minute battles, to 3-6 minute battles, making more fun, especially if the beys are attack types. Weakness, chromium costs, alot, it would make the average bey cost around 35$, which compared to normal prices, thats rather expensive.

Tungsten:
So HEAVYYYYY!!!!!!! Yup, tungsten weighs alot, an average bey's weight (25 grams) would increase to upwards of 80 grams! now not only would it DRAMATICALLY effect the bey's weight, but it would increase stamina due to momentum. beys could battle for longer because it would withstand more attacks, and beys could be launched at a much higher speed without reaching terminal velocity (The highest RPM that the bey could withstand) only issue is, with a heavy bey, means the need for tougher gears in ripcord launchers (this is not an issue with string launchers, but string launchers with a heavy bey can take tremendous strength) if you have used basalt diablo horogium, or diablo destroy, you will know what i mean. you strip gears like mad.
Although this would not be a hard fix, given you could just use metal gears for the launcher.
for those who want to know how long a battle could last with tungsten fusion wheels here ya go:
5-8 minute battles!
and BEST of all the features
the bey would not cost much more than it does already, only about a 2-3$ increase in price, which for what you get, it would be worth the extra price.

Now, this metal would be best for any bey, but would cost crazy!
Iridium:
Beys would have even MORE dramatic weight increase than tungsten, same exact result, only even better. issue is iridium is about 900$ for just 10 grams, which is not enough to even make the smallest fusion wheel, it would take roughly 115 grams of iridium to make a standard fusion wheel. so it would cost thousands of dollars to make it.

(Jun. 21, 2014  10:43 PM)MasterSwordsman Wrote: Kalthesuperior, how heavy is it, last time i got sick from lead poisoning due to a fake fusion wheel, if its anything heavier than 30 grams, wash your hands, thats likely made of lead, nobody wants ta get sick. yah, one big danger of fakes is fusion wheels are made as cheap as possible, lead is a cheap metal, and if not careful in a bey battle, could spew lead and who knows what will happen after that.

REAL fusion wheels are made of aluminum, and is heat-treated.(this information is based of my knowledge, it's weight, and properties) and also are die-cast very frequently.

FAKES are made of any kind of cheap metal, such as lead, tungsten, tin anything that would not cost much to make into a fusion wheel, i am VERY SURE that metal performance tips are made of tin, given they are rather hard, and they bend WAY too easily, some fake sellers are flat-out liars and the fusion wheel is made of plastic, or even worse, fakers who dont even intend on giving you something when you buy something.

What beys SHOULD be made out of is Carbon Steel, given they maintain performance much better, and plus everybody likes that "Ding!" kind of sound, and given how carbon steel absorbs hits better, they make that awesome sound.

I'm putting the rest in a spoiler given it's gonna go on for a couple of pages

Spoiler (Click to View)

Ok, now going on to what beys would be like if they were made of different metals
Magnesium:
ooooohhhh-ahhhhhhhhh, sparks, love em' magnesium sparks when it it hits another metal, so given how you would count that as fun, it is cool and not cool, good fact is they FREAKiNG SPARK, EPIC!!!!! not cool part is that that results in a fire hazard, or burn hazard. another not cool thing is that magnesium is brittle, and so it could snap more easily, and finally, magnesium is the LIGHTEST metal in existence, so beys would not spin as long, beys would weigh about 38% less than they do with the standard metal used.

Titanium:
Not bad, actually the bey would weigh roughly 44% more than it did before, given how titanium can bend crazy without losing shape, if could work for long-term use as well, only issue is titanium costs more than aluminum, so it would cost much more, beys that were about 21$ would cost about 30$, huge increase in price, right?

Chromium:
Ooh! Shiny!!!! chrome would be nice, its tougher than aluminum, and not to mention, shinier. It also would make fusion wheels weigh over 2 TIMES AS MUCH, which means the bey could battle for longer, which means that bey battle times would go from 2-5 minute battles, to 3-6 minute battles, making more fun, especially if the beys are attack types. Weakness, chromium costs, alot, it would make the average bey cost around 35$, which compared to normal prices, thats rather expensive.

Tungsten:
So HEAVYYYYY!!!!!!! Yup, tungsten weighs alot, an average bey's weight (25 grams) would increase to upwards of 80 grams! now not only would it DRAMATICALLY effect the bey's weight, but it would increase stamina due to momentum. beys could battle for longer because it would withstand more attacks, and beys could be launched at a much higher speed without reaching terminal velocity (The highest RPM that the bey could withstand) only issue is, with a heavy bey, means the need for tougher gears in ripcord launchers (this is not an issue with string launchers, but string launchers with a heavy bey can take tremendous strength) if you have used basalt diablo horogium, or diablo destroy, you will know what i mean. you strip gears like mad.
Although this would not be a hard fix, given you could just use metal gears for the launcher.
for those who want to know how long a battle could last with tungsten fusion wheels here ya go:
5-8 minute battles!
and BEST of all the features
the bey would not cost much more than it does already, only about a 2-3$ increase in price, which for what you get, it would be worth the extra price.

Now, this metal would be best for any bey, but would cost crazy!
Iridium:
Beys would have even MORE dramatic weight increase than tungsten, same exact result, only even better. issue is iridium is about 900$ for just 10 grams, which is not enough to even make the smallest fusion wheel, it would take roughly 115 grams of iridium to make a standard fusion wheel. so it would cost thousands of dollars to make it.

(Jun. 21, 2014  11:58 PM)yt152430 Wrote: Real wheels are made of zinc not aluminium

(Jun. 24, 2014  8:48 AM)Kalthesuperior Wrote: I made my own beyblade mostly out of non-beyblade parts

I call it...

Spoiler (Click to View)

Yoyobey!!!
[Image: 1403594039342.jpg]
[Image: 1403594196927.jpg]
[Image: 1403594341512.jpg]

So it's only the clear wheel that I took out from serpent.(And the Ray fusion wheel for added weight) The rest is from a yoyo I found lying around in my bedroom. The thing has a clutch system inside it, but it does absolutely nothing.

(Jun. 25, 2014  1:27 AM)Neo~ Wrote:

(Jun. 24, 2014  8:48 AM)Kalthesuperior Wrote: I made my own beyblade mostly out of non-beyblade parts

I call it...

Spoiler (Click to View)

Yoyobey!!!
[Image: 1403594039342.jpg]
[Image: 1403594196927.jpg]
[Image: 1403594341512.jpg]

So it's only the clear wheel that I took out from serpent.(And the Ray fusion wheel for added weight) The rest is from a yoyo I found lying around in my bedroom. The thing has a clutch system inside it, but it does absolutely nothing.

SPIN VIDEO PLEASE

(Jun. 25, 2014  2:18 AM)Kalthesuperior Wrote:

(Jun. 25, 2014  1:27 AM)Neo~ Wrote:

(Jun. 24, 2014  8:48 AM)Kalthesuperior Wrote: I made my own beyblade mostly out of non-beyblade parts

I call it...

Spoiler (Click to View)

Yoyobey!!!
[Image: 1403594039342.jpg]
[Image: 1403594196927.jpg]
[Image: 1403594341512.jpg]

So it's only the clear wheel that I took out from serpent.(And the Ray fusion wheel for added weight) The rest is from a yoyo I found lying around in my bedroom. The thing has a clutch system inside it, but it does absolutely nothing.

SPIN VIDEO PLEASE

I would put a video if I could, but I have no video cam.
Also found out it looks like a 4D beywheel with a multiwheel system.
The bottom part of this yoyobey is what I call the supreme ultra x-treme mega/giga round flat (SUX-TM/GROF) the bottom's around 2 inches in diameter, and the way it spins becomes pretty crazy.

(Jun. 25, 2014  7:20 PM)Kalthesuperior Wrote: Remodeled it to spin more:

1/2 yoyobey
[Image: 140371949729.jpg]
[Image: 140372002555.jpg]

(Jun. 25, 2014  10:14 PM)Kalthesuperior Wrote: Forgot to add this side view:

[Image: 1403730543424.jpg]

Now you can really see how it looks.

Plus I added bearings.

(Jun. 27, 2014  8:20 AM)Sensei Wrote: now that is starting to look more like a bey, anyway, when i start to feel better (I got slashed in the arm by my sword
I am going to try and make a bey fusion wheel out of meteorite (Bought one off ebay), it seems heavy, and looks like if I were to forge it, that it would make a good bey, a bey that is really made from a star that fell from the sky (more like a rock that fell from the sky)
hopefully i can get over this annoying wound on my arm and start making my bey.

(Jun. 28, 2014  1:19 AM)Kalthesuperior Wrote: [Image: 1403913906584.jpg]

Anyone want to tell me what I should do with the parts of this F230 to improve it?

I've already greased it to help it spin more in LAD bit haven't thought of anything else.

(Jun. 29, 2014  2:16 AM)Echizen Wrote:

(Jun. 28, 2014  1:19 AM)Kalthesuperior Wrote: [Image: 1403913906584.jpg]

Anyone want to tell me what I should do with the parts of this F230 to improve it?

I've already greased it to help it spin more in LAD bit haven't thought of anything else.

I think it's illegal to add grease or a lubricant. The only thing you can do is wash it off tbh.

(Jun. 29, 2014  3:36 AM)Kalthesuperior Wrote:

(Jun. 29, 2014  2:16 AM)Echizen Wrote:

(Jun. 28, 2014  1:19 AM)Kalthesuperior Wrote: [Image: 1403913906584.jpg]

Anyone want to tell me what I should do with the parts of this F230 to improve it?

I've already greased it to help it spin more in LAD bit haven't thought of anything else.

I think it's illegal to add grease or a lubricant. The only thing you can do is wash it off tbh.

Dude, this is the ILLEGAL BEYBLADE MODIFICATIONS DISCUSSION XD
Of course it's illegal. If you have an idea on how I could make it spin better, please tell me.