Possible 3D Print/Modification Format - Printable Version +- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org) +-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion) +--- Forum: Beyblade General (https://worldbeyblade.org/Forum-Beyblade-General) +--- Thread: Possible 3D Print/Modification Format (/Thread-Possible-3D-Print-Modification-Format) Pages:
1
2
|
Possible 3D Print/Modification Format - The Blacknight - Feb. 09, 2021 Ok, so i definitely think we need one of these. made this thread to brainstorm rule ideas, formatting, etc. Possible Rules: weight cannot exceed 10 grams more than the heaviest wbo legal TT/Hasbro combination. no metal protrusions. Bey must be part of an existing system. no lego beys. RE: Possible 3D Print/Modification Format - Golden Freddy - Feb. 09, 2021 (Feb. 09, 2021 5:56 PM)The Blacknight Wrote: Ok, so i definitely think we need one of these. made this thread to brainstorm rule ideas, formatting, etc. So cho x beys are banned? RE: Possible 3D Print/Modification Format - The Blacknight - Feb. 09, 2021 (Feb. 09, 2021 6:02 PM)Golden Freddy Wrote:(Feb. 09, 2021 5:56 PM)The Blacknight Wrote: Ok, so i definitely think we need one of these. made this thread to brainstorm rule ideas, formatting, etc. i meant no metal protrusions as metal contact points. RE: Possible 3D Print/Modification Format - Golden Freddy - Feb. 09, 2021 (Feb. 09, 2021 6:04 PM)The Blacknight Wrote:(Feb. 09, 2021 6:02 PM)Golden Freddy Wrote: So cho x beys are banned? Cho x beys have that RE: Possible 3D Print/Modification Format - CheetoBlader - Feb. 09, 2021 (Sep. 10, 2020 7:08 PM)CitrusNinja3 Wrote:Something that Citrus had said before.(Sep. 10, 2020 3:29 PM)Dacatman Wrote: I was asking to see if anyone wanted this as well as me. RE: Possible 3D Print/Modification Format - 6Jupiter5 - Feb. 09, 2021 Personally, although I do want to see it happen, it’s just too much work and money spent on internet strangers especially when you add deck formats. RE: Possible 3D Print/Modification Format - GreenK9148 - Feb. 09, 2021 I would like to see this happen. Although, I'm doubtful it will go through. maybe only allow 3D printed layers. and test the combo against top tier combos. RE: Possible 3D Print/Modification Format - The Blacknight - Feb. 09, 2021 here's an idea: Set a few file designers, and the files can be distributed for money. If you want to submit a bey, send the file to the designers. If tested, tweaked(if necessary), and approved, the file will be for sale at the original creator's designated price. Half the proceeds can go to the creator and half to the WBO. The designers can also produce their own files and designers and creators can print beys for others(for a higher price, of course). This way, the WBO gets money, the creators get money, and the designers get money. RE: Possible 3D Print/Modification Format - Golden Freddy - Feb. 09, 2021 (Feb. 09, 2021 8:43 PM)The Blacknight Wrote: here's an idea: Set a few file designers, and the files can be distributed for money. If you want to submit a bey, send the file to the designers. If tested, tweaked(if necessary), and approved, the file will be for sale at the original creator's designated price. Half the proceeds can go to the creator and half to the WBO. The designers can also produce their own files and designers and creators can print beys for others(for a higher price, of course). This way, the WBO gets money, the creators get money, and the designers get money. So the wbbo gets money for what? Saying your bey is good to go? It seems like the wbbo gets money for no work RE: Possible 3D Print/Modification Format - DeltaZakuro - Feb. 09, 2021 (Feb. 09, 2021 9:02 PM)Golden Freddy Wrote:(Feb. 09, 2021 8:43 PM)The Blacknight Wrote: here's an idea: Set a few file designers, and the files can be distributed for money. If you want to submit a bey, send the file to the designers. If tested, tweaked(if necessary), and approved, the file will be for sale at the original creator's designated price. Half the proceeds can go to the creator and half to the WBO. The designers can also produce their own files and designers and creators can print beys for others(for a higher price, of course). This way, the WBO gets money, the creators get money, and the designers get money. Bruh... Money is how mods keep the site running. This should be known stuff. RE: Possible 3D Print/Modification Format - Golden Freddy - Feb. 09, 2021 (Feb. 09, 2021 9:09 PM)DeltaZakuro Wrote:(Feb. 09, 2021 9:02 PM)Golden Freddy Wrote: So the wbbo gets money for what? Saying your bey is good to go? It seems like the wbbo gets money for no work And they should find a way to get money through other means. Not just high jacking someone’s hard work. RE: Possible 3D Print/Modification Format - The Blacknight - Feb. 10, 2021 (Feb. 09, 2021 9:28 PM)Golden Freddy Wrote:(Feb. 09, 2021 9:09 PM)DeltaZakuro Wrote: Bruh... Money is how mods keep the site running. This should be known stuff. It’s not like h to e person won’t get money. Depending on the popularity of the bey, they could make a lot. But how is the wbo gonna pay for prizes, tournaments, etc.? Money makes the world go round. You would be telling the site to sell your product. They should get some money in return. That’s how retail stores like Walmart and target work lol RE: Possible 3D Print/Modification Format - Golden Freddy - Feb. 10, 2021 (Feb. 10, 2021 3:18 AM)The Blacknight Wrote:(Feb. 09, 2021 9:28 PM)Golden Freddy Wrote: And they should find a way to get money through other means. Not just high jacking someone’s hard work. Ok but is there a option where the wbbo can say you can use your bey but not have it sold. Cause some people just want their own bey that no one can use like in the anime. RE: Possible 3D Print/Modification Format - TheFeatherArrow - Feb. 10, 2021 (Feb. 09, 2021 8:43 PM)The Blacknight Wrote: here's an idea: Set a few file designers, and the files can be distributed for money. If you want to submit a bey, send the file to the designers. If tested, tweaked(if necessary), and approved, the file will be for sale at the original creator's designated price. Half the proceeds can go to the creator and half to the WBO. The designers can also produce their own files and designers and creators can print beys for others(for a higher price, of course). This way, the WBO gets money, the creators get money, and the designers get money. Isnt this almost the exact same thing that TT and Hasbro are doing(only difference is they dont need to split the money with anyone)? Wouldn't this idea form a metagame soon enough just like the current formats that we already have? Idk, it seems unnecessary to me. RE: Possible 3D Print/Modification Format - The Blacknight - Feb. 10, 2021 (Feb. 10, 2021 3:25 AM)Golden Freddy Wrote:if your bey is really good(like tempest), yet no one else has it, isn't that a but unfair?(Feb. 10, 2021 3:18 AM)The Blacknight Wrote: It’s not like h to e person won’t get money. Depending on the popularity of the bey, they could make a lot. But how is the wbo gonna pay for prizes, tournaments, etc.? Money makes the world go round. You would be telling the site to sell your product. They should get some money in return. That’s how retail stores like Walmart and target work lol RE: Possible 3D Print/Modification Format - TheFeatherArrow - Feb. 10, 2021 (Feb. 10, 2021 3:08 PM)The Blacknight Wrote:(Feb. 10, 2021 3:25 AM)Golden Freddy Wrote: Ok but is there a option where the wbbo can say you can use your bey but not have it sold. Cause some people just want their own bey that no one can use like in the anime.if your bey is really good(like tempest), yet no one else has it, isn't that a but unfair? And this is why this type of format will not work. People say it offers a more creative aspect to bladers, but after a while a metagame will start coming in and make it not different to any of the formats we have. RE: Possible 3D Print/Modification Format - The Blacknight - Feb. 10, 2021 (Feb. 10, 2021 3:03 PM)TheFeatherArrow Wrote:(Feb. 09, 2021 8:43 PM)The Blacknight Wrote: here's an idea: Set a few file designers, and the files can be distributed for money. If you want to submit a bey, send the file to the designers. If tested, tweaked(if necessary), and approved, the file will be for sale at the original creator's designated price. Half the proceeds can go to the creator and half to the WBO. The designers can also produce their own files and designers and creators can print beys for others(for a higher price, of course). This way, the WBO gets money, the creators get money, and the designers get money. Exactly. If it aint broke, dont fix it. It would form a metagame, but the whole point is that people can ADD to the metagame. It's a beyblade democracy. ofc, we might wanna give a bit more money to the creators, but depending on the popularity, this could keep the WBO running, pay for prizes and tourneys, and a lot more stuff. (Feb. 10, 2021 3:11 PM)TheFeatherArrow Wrote:(Feb. 10, 2021 3:08 PM)The Blacknight Wrote: if your bey is really good(like tempest), yet no one else has it, isn't that a but unfair? again, add to the metagame. if you think you can change smth, then you can. RE: Possible 3D Print/Modification Format - TheFeatherArrow - Feb. 10, 2021 Also, how would others have access to these beys? Would they print them/buy them? RE: Possible 3D Print/Modification Format - The Blacknight - Feb. 10, 2021 (Feb. 10, 2021 3:17 PM)TheFeatherArrow Wrote: Also, how would others have access to these beys? Would they print them/buy them? They would buy the files, put in an order for someone else to print RE: Possible 3D Print/Modification Format - Golden Freddy - Feb. 10, 2021 (Feb. 10, 2021 3:08 PM)The Blacknight Wrote:(Feb. 10, 2021 3:25 AM)Golden Freddy Wrote: Ok but is there a option where the wbbo can say you can use your bey but not have it sold. Cause some people just want their own bey that no one can use like in the anime.if your bey is really good(like tempest), yet no one else has it, isn't that a but unfair? No because you have to make a bey that’s better RE: Possible 3D Print/Modification Format - The Blacknight - Feb. 10, 2021 (Feb. 10, 2021 8:40 PM)Golden Freddy Wrote:Actually, that’s a good idea(Feb. 10, 2021 3:08 PM)The Blacknight Wrote: if your bey is really good(like tempest), yet no one else has it, isn't that a but unfair? RE: Possible 3D Print/Modification Format - SeaBASS90 - Feb. 10, 2021 Ok, I know this is off-topic, but I really need to download a Hasbro 3D printing file. Could someone send me one? RE: Possible 3D Print/Modification Format - Drbstp - Feb. 10, 2021 (Feb. 10, 2021 8:40 PM)Golden Freddy Wrote:I’m going to write up a simple proposal for a “Modded Format” where all parts and Beys are welcome; if and any only if you’re battling in that specific category. All Beys and underdogs will be welcome to battle against each other if they feel as though their Beys are strong enough to withstand the pressure with no penalties to the Bladers. Parents would sign waivers and Beys would be inspected for potentially dangerous parts. You can have the 3D part; I support it fam!(Feb. 10, 2021 3:08 PM)The Blacknight Wrote: if your bey is really good(like tempest), yet no one else has it, isn't that a but unfair? RE: Possible 3D Print/Modification Format - 6Jupiter5 - Feb. 10, 2021 More rule: 1 bey only (this is done to reduce work on part of others) Layers only (for 3d printing) 3D remakes of already existing beys are allowed RE: Possible 3D Print/Modification Format - Golden Freddy - Feb. 10, 2021 (Feb. 10, 2021 9:04 PM)6Jupiter5 Wrote: More rule: Why not drivers? |