World Beyblade Organization by Fighting Spirits Inc.
Answered Invincible Noctemis - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade Hobby Q&A (https://worldbeyblade.org/Forum-Beyblade-Hobby-Q-A)
+--- Thread: Answered Invincible Noctemis (/Thread-Answered-Invincible-Noctemis)

Pages: 1 2 3

Invincible Noctemis - Cuza Ackerman 1 - Nov. 02, 2018

Ok, so recently, my friend got the Battle Tower set by Hasbro. Being the blader I was, I was bouncing up and down with joy as I saw the stadium in his hands. So I battled him and could never win against his Noctemis. I brushed it off at first, but then it got more annoying that my best combo couldn't beat him! I decided to take a look and try to take it apart, but it was on so tight I couldn't even TURN it to take it apart! Anybody have a clue to why this is?

RE: Invincible Noctemis - the legend 36 - Nov. 02, 2018

i thought that was geist fafnir

RE: Invincible Noctemis - MWF - Nov. 02, 2018

It could be a mold error.

RE: Invincible Noctemis - DrainBladerAMVS - Nov. 02, 2018

Does he have any TT parts because when a TT driver is on a Hasbro bey it's really tight and hard to turn or maybe I'm just weak

RE: Invincible Noctemis - Jman jman - Nov. 02, 2018

I have the set and my burst all the time. Wait are you battling in the battle tower if you are it is really hard to burst any thing.

RE: Invincible Noctemis - Cuza Ackerman 1 - Nov. 05, 2018

(Nov. 02, 2018  7:27 PM)DrainBladerAMVS Wrote: Does he have any TT parts because when a TT driver is on a Hasbro bey it's really tight and hard to turn or maybe I'm just weak

All he has is Hasbro beys.
(Nov. 02, 2018  8:48 PM)Jman jman Wrote: I have the set and my burst all the time. Wait are you battling in the battle tower if you  are it is really hard to burst any thing.

We battled in the Chaos Core stadium, which has a much bigger battle space.

RE: Invincible Noctemis - Bey Legend XD - Nov. 05, 2018

To burst it or to disassemble the layer?

RE: Invincible Noctemis - Mage - Nov. 05, 2018

What parts were they using?

RE: Invincible Noctemis - Bey Legend XD - Nov. 05, 2018

If it's to burst I think I have an answer, either he used the paper mod where you put paper where the slopes go, and he put a whole bunch, or he just super glued the layer

RE: Invincible Noctemis - CitrusNinja3 - Nov. 05, 2018

What combo were you using?

RE: Invincible Noctemis - Armor - Nov. 05, 2018

(Nov. 05, 2018  2:22 AM)Bey Legend XD Wrote: If it's to burst I think I have an answer, either he used the paper mod where you put paper where the slopes go, and he put a whole bunch, or he just super glued the layer

This is impossible(the super glue). He took it apart, despite the effort, meaning it wasn't glued.

RE: Invincible Noctemis - Dt20000 - Nov. 05, 2018

(Nov. 05, 2018  3:55 AM)Armor Wrote:
(Nov. 05, 2018  2:22 AM)Bey Legend XD Wrote: If it's to burst I think I have an answer, either he used the paper mod where you put paper where the slopes go, and he put a whole bunch, or he just super glued the layer

This is impossible(the super glue). He took it apart, despite the effort, meaning it wasn't glued.

When did they say the took it apart

RE: Invincible Noctemis - Armor - Nov. 05, 2018

My apologies, I misread what he wrote. I guess that's possible.

RE: Invincible Noctemis - Curry boi - Nov. 05, 2018

I say it’s a whole bunch of paper

RE: Invincible Noctemis - Cuza Ackerman 1 - Nov. 05, 2018

(Nov. 05, 2018  3:03 AM)CitrusNinja3 Wrote: What combo were you using?

Strike V3 5 Hold. It destroyed Odax O2, which has the best slopes I've seen

RE: Invincible Noctemis - MWF - Nov. 05, 2018

(Nov. 05, 2018  5:42 PM)Cuza Ackerman 1 Wrote:
(Nov. 05, 2018  3:03 AM)CitrusNinja3 Wrote: What combo were you using?

Strike V3 5 Hold. It destroyed Odax O2, which has the best slopes I've seen

O2 has mediocre slopes. N3 has better slopes. V3 (strike is just a remold).5.H is average. Try X3.7B.X or kalazar K3.0B.At.

RE: Invincible Noctemis - Cuza Ackerman 1 - Nov. 05, 2018

(Nov. 05, 2018  5:47 PM)MWF Wrote:
(Nov. 05, 2018  5:42 PM)Cuza Ackerman 1 Wrote: Strike V3 5 Hold. It destroyed Odax O2, which has the best slopes I've seen

O2 has mediocre slopes. N3 has better slopes. V3 (strike is just a remold).5.H is average. Try X3.7B.X or kalazar K3.0B.At.
Which O2 are you talking about? I got the one from the W2 O2 Dual pack and the slopes are so tight. Not sure about the O2 Starter pack.. Surtr S2 and Odax O2 dual pack's Odax slopes aren't good. Plus, I don't Have X3 or K3, much less those parts.

RE: Invincible Noctemis - Jman jman - Nov. 05, 2018

(Nov. 05, 2018  6:19 PM)Cuza Ackerman 1 Wrote:
(Nov. 05, 2018  5:47 PM)MWF Wrote: O2 has mediocre slopes. N3 has better slopes. V3 (strike is just a remold).5.H is average. Try X3.7B.X or kalazar K3.0B.At.
Which O2 are you talking about? I got the one from the W2 O2 Dual pack and the slopes are so tight. Not sure about the O2 Starter pack.. Surtr S2 and Odax O2 dual pack's Odax slopes aren't good. Plus, I don't Have X3 or K3, much less those parts.

Okay do yo have f3?

RE: Invincible Noctemis - Cuza Ackerman 1 - Nov. 05, 2018

(Nov. 05, 2018  6:28 PM)Jman jman Wrote:
(Nov. 05, 2018  6:19 PM)Cuza Ackerman 1 Wrote: Which O2 are you talking about? I got the one from the W2 O2 Dual pack and the slopes are so tight. Not sure about the O2 Starter pack.. Surtr S2 and Odax O2 dual pack's Odax slopes aren't good. Plus, I don't Have X3 or K3, much less those parts.

Okay do yo have f3?
Yeah
(Nov. 05, 2018  2:18 AM)Mage Wrote: What parts were they using?

Just the stock combo, N3 2 Jaggy

RE: Invincible Noctemis - Mage - Nov. 05, 2018

(Nov. 05, 2018  6:30 PM)Cuza Ackerman 1 Wrote:
(Nov. 05, 2018  6:28 PM)Jman jman Wrote: Okay do yo have f3?
Yeah
(Nov. 05, 2018  2:18 AM)Mage Wrote: What parts were they using?

Just the stock combo, N3 2 Jaggy

Due to the Battle Tower's relatively small battle area and the Hold tip's large surface area, it's very likely for your combo to lose a lot of stamina before getting good hits off the opponent. Jaggy on the other hand, is a lot more controllable and does not move around as much as Hold. Try a more controllable Driver that has less surface area, that will probably help with staying in the fight longer.

RE: Invincible Noctemis - Jman jman - Nov. 05, 2018

(Nov. 05, 2018  6:30 PM)Cuza Ackerman 1 Wrote:
(Nov. 05, 2018  6:28 PM)Jman jman Wrote: Okay do yo have f3?
Yeah
(Nov. 05, 2018  2:18 AM)Mage Wrote: What parts were they using?

Just the stock combo, N3 2 Jaggy
Soft launch f3 should be able burst it if there is no funny business going on.

RE: Invincible Noctemis - Cuza Ackerman 1 - Nov. 05, 2018

(Nov. 05, 2018  9:04 PM)Mage Wrote:
(Nov. 05, 2018  6:30 PM)Cuza Ackerman 1 Wrote: Yeah

Just the stock combo, N3 2 Jaggy

Due to the Battle Tower's relatively small battle area and the Hold tip's large surface area, it's very likely for your combo to lose a lot of stamina before getting good hits off the opponent. Jaggy on the other hand, is a lot more controllable and does not move around as much as Hold. Try a more controllable Driver that has less surface area, that will probably help with staying in the fight longer.

We did the battles in the Chaos Core stadium.

RE: Invincible Noctemis - CitrusNinja3 - Nov. 06, 2018

If you have Legend Spryzen S3 or Spryzen Requiem S3, give those a try.

RE: Invincible Noctemis - Armor - Nov. 06, 2018

Agreed. Also, are you looking to burst, or just beat his combo?

RE: Invincible Noctemis - Cuza Ackerman 1 - Nov. 06, 2018

(Nov. 06, 2018  4:45 AM)Armor Wrote: Agreed. Also, are you looking to burst, or just beat his combo?
Well, not really either of those 2, I just need to figure out what's going on.