3D Printable Beyblade Burst Layer / Frame Design Archive - TL14 - Jun. 12, 2018
Disclaimer: I know that @[K1D] already made a thread for 3D printed Beyblade parts but this thread is exclusively for Layers and Frames. I think that making a seperate thread for only Layer and Frame designs instead of every 3D printed Beyblade part will maintain an easy overview of all shared Beyblade Burst Layer and Frame designs made by fans. This will make it easier to search and find a specific design you are looking for. Sincerely, TL14 :)
Your design post should contain:
1. The Name of the part.
2. The Type of the part.
3. [Optional] The full combo with that part.
4. [Optional] Info about the part's origin and (fictional) owner of the combo.
5. [Optional] The special move of your combo.
6. [Optional] What does it Bit Beast / Bey Avatar look like?
7. [Optional] A video about the part or the combo.
8. [Optional] Other things about your own Bey you would like to let us know about.
Have Fun! :)
Owner: Hikaru Kurokawa (a fictional character who I based on my experience with Beyblading)
Age:
Prototype Khalahad Arc: Chapter 1-3
6 yo (chapter 1; Autumn 2004), 7 yo(chap. 2; Winter 2004) 8 yo (chap. 3; Winter 2005),
Kosmic Khalahad Arc: Chapter 4
11 yo (chap. 4; Summer 2010),
Horizon Khalahad Arc: Chapter 5
12 yo (chap. 5; Spring 2011)
Demon Khalahad Arc: Chapter 6
15 yo (chap. 6; Summer 2014), 16 yo (chap. 7; Autumn 2015),
Nebula Khalahad Arc: Chapter 8
17 yo (chap. 8; Summer 2016),
Dark Nebula Khalahad: Chapter 9
19 yo (chap. 9; Summer 2018),
Quasar Khalahad: chapter 10
20+ yo (final chap. 10; Autumn)
Single Layer Beyblade Name: Khalahad Polish Wedge (link: https://www.instagram.com/p/Bj7NU7iDpNN/?taken-by=turbolibra14
Type: Stamina
BeyAvatar: A fusion between a bear and a werewolf with an owl head and wings. (The BeyAvatar will evolve as the story goes on)
Special Move: Stardust Claw (utilizes his claws on its Layer for a great barrage of attacks)
Origin of Khalahad: Chapter 1
Khalahad was Hikaru's first Bey. Autumn 2004:
When Hikaru was about 6 years old, he and his dad went into the forest to chop wood because his dad works as a lumberjack. But when his dad was about to chop the 14th oak, a bird nest fell down and inside it was a Beyblade! Hikaru suddenly heard a voice coming from his Bey calling out to him: "Khala... Khalahad! I AM... KHALAHAD." Then the voice was gone. Hikaru's dad was quite confused about what his son had found but he let Hikaru keep it thinking it was just a little piece of plastic that a bird left there. He also didn't hear the voice. Only Hikaru did. In the middle of the night Hikaru woke up from a bright light coming from his desk. It was Khalahad. He was glowing like crazy! Then the voice called out to him again: "Khala... Khalahad! I AM... KHALAHAD. Spin... meeee!" Then the glow faded. Hikaru was not sure if it was real or if he was dreaming. Never the less, Hikaru couldn't sleep well that night. The next day Hikaru visited his new friend Karlo Kortez. He just moved here from portugal a few weeks ago but he is a huge Beyblade fan. Karlo told him that what he had found was indeed a Beyblade and it must have been a rare one because he has never seen something like that before. Also the combination had the parts Polish and Wedge which was a very unique mixture. Hikaru had no idea before that what a Beyblade even was and he was quite surprised and happy that he had found such a cool toy. Karlo turned around and pulled out out a Beyblade from under his bed. Karlo then said: "This is my Beyblade: Zilvern Central Gyro! It's an eternally spinning silver Wyvern. Nothing can stop it." Hikaru was astonished by the high tech of this Beyblade. But then Khalahad glew again and a voice called out to him: "Khala... Khalahad! I AM... KHALAHAD. Spin... meeee! NOW!" Karlo said: Bro. Are you now ready or do you want to keep staring onto your Blade forever?" Hikaru quickly replied in cofusion: "Yea... yes. Sure. Let's start." Both Bladers put their Bey onto the launcher and pulled the ripcord while saying: "3, 2, 1, Let it Rip!" Now the Beys were clashing in the basic yellow triangle stadium. Hikaru then screamed: "Go Khalahad! Show him what you're made of! I beleive in your POWER!" Khalahad responded by glowing again. Then a beast climbed out of his Bey and glew in a colorful light. The bey sped up and hit Zilvern into the pocket winning the first round. Hikaru was super happy because he just won his first battle. But Karlo replied: "This is not over yet! It's time for round number two!" When both Bladers launched their Beys again, Karlo launched more angled than usual. This made his Bey speed up and slam right onto Khalahad. BOOM! Khalahad bursted and his pieces were scattered around the room. Karlo spoke: "Hah. I won because a burst finish gives you two points!" Hikaru was shocked about his loss because he thought he would be invincible. He started tearing up a little but his friend said that he has a great bey and that they are now good friends. This cheered him up a little and made Hikaru smile again. They promised to see each other again in the upcoming Beyblade Blackwater District Tournament.
PS: Hikaru will get a new Bey soon and there will be some time skips.
Dual Layer Beyblade Name: Kosmic Khalahad Infinity Eternal (link: https://www.instagram.com/p/Bj7NgoVjSp9/?taken-by=turbolibra14 )
Type: Stamina
BeyAvatar: A fusion between a bear and a werewolf with an owl head and wings. (The BeyAvatar will evolve as the story goes on)
Special Move: Kosmic Wing (utilizes his claws on its Layer for a great barrage of attacks)
Origin of Kosmic Khalahad: Chapter 2
Kosmic Khalahad was Hikaru's second Bey. Winter 2004:
Hikaru and his friend Karlo were training in the past few weeks like crazy. They practiced every day from sunrise to sunset. They battled on ice, in water, on rocks and even in trees. They've battled in every enviroment and homemade stadium they could think of. But when Karlo launched his Bey, but was unconcentraded because he saw a magpie flying by, his Zilvern Central Gyro rolled out of the stadium and onto the street. Unfortunatly it got run over by a car and it was completely broken. Karlo cried out: "What should I do now? I don't have a Beyblade nomore" Karlo was very upse that day. The next day he was still depressed but decided to go with Hikaru to the tournament anyways since they made a promise to each other. The day of the Beyblade Blackwater District Tournament has come. Karlos dad, Klaus is his name, was driving them to the Beyblade Blackwater District Tournament. When they arrived at the tournament dome and were about to enter Klaus said to his son Karlo: "Hey buddy. I know you've been very upset recetly because your Beyblade got run over by a car and broke. But as you may know I collect rare Beyblade parts and I've build this for you my son. It's a Ninja Zilvern Quater Nothing. The Hyperblade Color scheme of purple and red does not only look cool but it also has great secrets in its performance. Try different techniques and you will discover it's true potential." Now Klaus turned to Hikaru and said: "Oh and for you Hikaru, I have something as well. Take a look at this. It's pretty awesome. Don't you think? I hope you like it." Klaus handed Hikaru a long winder along with a Light Launcher. Hikaru replied with a big smile on his face: "Oh wow! Ive never seen something like that before. I only had this Proto Launcher before. This one should be much better. Thank you sir." As the two friernds went inside they were astonished by how many bladers were there. The first few battles were just against some random, generic and stock Beys. Hikaru still had some trouble defeating his opponents but he still won most of his battles because of his Beys' LAD. Meanwhile Karlo was having a blast with his new Ninja Zilvern Quater Nothing after he had found out what his new unbalanced and spring loaded Bey can do. When he launched it at an angle it was drifting like a pendulum at very high speed. It was awesome. Eventually both of them made it into the semi finals. To be continued soon...
PS: Hikaru will get a new Bey soon and there will be some time skips.
Dual Layer Beyblade Name: Horizon Khalahad 7-Star Friction
Type: Balance
BeyAvatar: A fusion between a bear and a werewolf with an owl head and wings. (The BeyAvatar will evolve as the story goes on)
Special Move: Horizon Breaker (uses it's recoil to charge up and pick up speed)
Origin of Horizon Khalahad: Chapter 3
Horizon Khalahad was Hikaru's third Bey. Summer 2010:
~Story will be continued soon. Please have patience.~
PS: Hikaru will get a new Bey soon and there will be some time skips.
I will update this post once in a while and new evolutions and more story will be added. Videos of the 3D printed Beys will also be uploaded once they arrive. Stay tuned. :)
Sincerely, TL14
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - Ekathee360 - Jun. 13, 2018
Layer: tyespro. the layer has four spikes and the layer abilitie is the four spikes can change to two spikes.
The colors are green/black/ and purple.
Disc:12
Frame: bump
Driver: zeta: the driver is the normal color red.
Owner ty shakaderia son of Zander shakaderia.
God chip: just a normal green metal god chip.
Please respond if so thank you.
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - Dragunix - Jun. 13, 2018
Layer: Nova Dragoon (Attack type)
Like a cho-z right spin lS, but with upper force like tN instead of sharp contact points. White layer has ruby highlights on dragon heads, with gold eyes Has metal underneath filling most gaps, as well as a azure (blue) center engraved with a black Dragooon (ZRG) style logo. Silver wings line and encase the center Teeth are similar to that of layers like sX and Sr
Full combo (Revamp of og idea from the thread):
Nova Dragoon 7 Inferno (I) Erupt (Er)
Layer above, with 7 and a metal lined frame like a 6 bladed flipped reach frame. The driver is basically R2F but diameter is barely skinnier than jolt.
Obtained after Arctic Circle thing (see the make your own burst character thread by admiral w).
See same thread for Raos, page 2, scroll down.
See thread for launches (burst seems to have some of those as "Sp. Moves, idk if those fit that way here)
Avatar is a white dragon with silver armor. In the center of the abdomen armorpiece lies a translucent ruby orb housing magma. The dragon has azure (blue) eyes and resembles western style dragons with elements of OG dragoon.
See thread mentioned above for info.
I really need to get back to this thing on the other thread and threads...rip.
Note: not printed. I really hope someone knows how to get started in 3-D printing, seeing as I really want to make this bey real. Does anyone have a good knowledge of 3D Printing?
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - Thunder Blur - Jun. 13, 2018
Do you have this beyblade modeled or printed?
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - Dragunix - Jun. 14, 2018
(Jun. 13, 2018 3:50 PM)Thunder Blur Wrote: Do you have this beyblade modeled or printed?
Who are you asking?
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - Thunder Blur - Jun. 14, 2018
(Jun. 14, 2018 2:12 AM)Dragunix Wrote: (Jun. 13, 2018 3:50 PM)Thunder Blur Wrote: Do you have this beyblade modeled or printed?
Who are you asking?
You, my dude
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - Dragunix - Jun. 14, 2018
(Jun. 14, 2018 2:52 AM)Thunder Blur Wrote: (Jun. 14, 2018 2:12 AM)Dragunix Wrote: Who are you asking?
You, my dude Well, no...not really? Why may you ask???
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - Thunder Blur - Jun. 14, 2018
(Jun. 14, 2018 4:38 AM)Dragunix Wrote: (Jun. 14, 2018 2:52 AM)Thunder Blur Wrote: You, my dude Well, no...not really? Why may you ask???
Well this is an archive of 3d printed beyblades.
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - Dragunix - Jun. 14, 2018
(Jun. 14, 2018 5:40 AM)Thunder Blur Wrote: (Jun. 14, 2018 4:38 AM)Dragunix Wrote: Well, no...not really? Why may you ask???
Well this is an archive of 3d printed beyblades.
Oh whoops...forgot that TL14 had Khalahad printed...
Should I just delete my post?
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - Thunder Blur - Jun. 14, 2018
(Jun. 14, 2018 5:44 AM)Dragunix Wrote: (Jun. 14, 2018 5:40 AM)Thunder Blur Wrote: Well this is an archive of 3d printed beyblades.
Oh whoops...forgot that TL14 had Khalahad printed...
Should I just delete my post?
I think you're ok
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - Dragunix - Jun. 14, 2018
Btw do you or anybody else know how to start modeling? Not sure if my computer will support freecad or other programs, and I'm not very certain on how to make/find and download bases
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - TL14 - Jun. 14, 2018
(Jun. 14, 2018 8:24 AM)Dragunix Wrote: Btw do you or anybody else know how to start modeling? Not sure if my computer will support freecad or other programs, and I'm not very certain on how to make/find and download bases
I use tinkercad. Good things are that it's 100% free, easy to learn and use, web based and you get no viruses at all and it's very safe to use. The only downside is that you don't have that many design options but with a bit of creativity you can make really awesome designs. It's like the 3D modeling version of Lego and Minecraft.
RE: 3D Printed Beyblade Burst Layer / Frame Design Archive - Dragunix - Jun. 14, 2018
(Jun. 14, 2018 1:49 PM)TL14 Wrote: (Jun. 14, 2018 8:24 AM)Dragunix Wrote: Btw do you or anybody else know how to start modeling? Not sure if my computer will support freecad or other programs, and I'm not very certain on how to make/find and download bases
I use tinkercad. Good things are that it's 100% free, easy to learn and use, web based and you get no viruses at all and it's very safe to use. The only downside is that you don't have that many design options but with a bit of creativity you can make really awesome designs. It's like the 3D modeling version of Lego and Minecraft.
A few questions...
What printer/service do you use? And what is the best option?
Second...I saw on another 3d printing related thread that freecad seems to be a good software to use...any ideas on other easy but very creative design programs? I'm not very fond of Google Sketchup atm XD...
RE: 3D Printable Beyblade Burst Layer / Frame Design Archive - TL14 - Jun. 14, 2018
(Jun. 14, 2018 1:58 PM)Dragunix Wrote: (Jun. 14, 2018 1:49 PM)TL14 Wrote: I use tinkercad. Good things are that it's 100% free, easy to learn and use, web based and you get no viruses at all and it's very safe to use. The only downside is that you don't have that many design options but with a bit of creativity you can make really awesome designs. It's like the 3D modeling version of Lego and Minecraft.
A few questions...
What printer/service do you use? And what is the best option?
Second...I saw on another 3d printing related thread that freecad seems to be a good software to use...any ideas on other easy but very creative design programs? I'm not very fond of Google Sketchup atm XD...
I get my designs printed at trinckle but for worldwide shipping I would reccomend shapeways. So far I only have experience with tinkercad but there may be better programms.
RE: 3D Printable Beyblade Burst Layer / Frame Design Archive - Logic123ABC - May. 11, 2019
Layer: Apex leviathan(Balance type)
My bey is left spin, and very heavy. Leviathan is mostly round but has three main contact points,which are good for smash attack. It has a gray and Navy blue leviathan in the middle, but most of the beyblade is tiel.
The full combo is o bump, and charge (from ace dragon)
|