+- World Beyblade Organization (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade Hobby Q&A (https://worldbeyblade.org/Forum-Beyblade-Hobby-Q-A)
+--- Thread: Answered Teeth Wear (/Thread-Answered-Teeth-Wear)
Teeth Wear - mj9 - May. 15, 2017
Yes teeth wear one of the main problems that plagued Burst at the start
So it is common knowledge that both Valkyrie and Deathscyther both suffer from teeth wear is there any other layers that do since the issue did not get fixed until xcalibur's release and it affected layers that were labeled as attack types
Did these layers suffer from teeth wear?
Odin
Minoboros
Amae
Amaterios
If so were there any other layers that suffered from this issue
Thanks in advance
RE: Teeth Wear - FIREFIRE CPB - May. 15, 2017
I'm pretty sure Minoboros wear quite fast, mine worn out after just a week and it's unusable now...
As far as I remember, it's not the case with Odin (atleast I didn't experienced after 2 months of use).
RE: Teeth Wear - ToxicAtom - May. 15, 2017
The taller the teeth, the more they wear, especially if they're the old style. Be wary of any teeth as long as Valkyrie's
RE: Teeth Wear - spiderboy153 - May. 15, 2017
my god valkriys teeth wore down too
RE: Teeth Wear - Kai-V - May. 15, 2017
(May. 15, 2017 1:57 PM)spiderboy153 Wrote: my god valkriys teeth wore down too
That is almost impossible. Can you post a photograph? All Beyblades since Xcalibur have had wider teeth rings, so they are a lot less likely to wear down.
By the way, I find that my Odin is much easier to burst than a year ago or so when I won a tournament with it.
RE: Teeth Wear - Wombat - May. 15, 2017
I asked a similar question about Minoboros earlier this year, and from what other people have asked (and my own experience) it doesn't seem to wear.
I don't think Odin wears, it's still as difficult to burst for me as it was about a year and a half ago, and I've used it quite a lot since then. I think the whole "Odin wears down" thing started when the community was first widely discovering that Deathscyther wore down quickly, and since Deathscyther and Odin were being compared a lot during that time people started thinking Odin wore down quickly too, when in reality there isn't a whole lot to wear down in the first place.
On the other hand, @[Cake] and I are pretty certain that the first, tall tooth on the Neptune Layer wears down over time - it's a lot more gradual and less noticeable than Valkyrie or Deathscyther because it's only one tooth wearing down and since Neptune is less prone to bursting than either of those Layers, the tooth doesn't undergo the same amount of stress as Valkyrie's or Deathscyther's teeth do. But after over a year of using N_R as a practice dummy for Attack types, I have noticed that Neptune has become somewhat easier to burst.
RE: Teeth Wear - MonoDragon - May. 15, 2017
The best way to confirm an answer is to get new and heavily worn layers, single and dual, and use a gauge to measure the force it takes to skip the teeth.
But alas who buy something like that for a top game?
Personally though. I find no reason that Dual Layer teeth don't wear down eventually. It's plastic, even when made thicker it's still gonna wear down with use, just a lot more slowly
RE: Teeth Wear - Sunburnninja - May. 15, 2017
Amae?
RE: Teeth Wear - Jimmyjazz39 - May. 15, 2017
im pretty sure amaterious suffers from teeth wear but i dont think the others do
RE: Teeth Wear - Kei - May. 16, 2017
(May. 15, 2017 8:34 PM)Wombat Wrote: On the other hand, @[Cake] and I are pretty certain that the first, tall tooth on the Neptune Layer wears down over time - it's a lot more gradual and less noticeable than Valkyrie or Deathscyther because it's only one tooth wearing down and since Neptune is less prone to bursting than either of those Layers, the tooth doesn't undergo the same amount of stress as Valkyrie's or Deathscyther's teeth do. But after over a year of using N_R as a practice dummy for Attack types, I have noticed that Neptune has become somewhat easier to burst.
I can confirm this. My first Neptune is unusable in tournaments now (at least by my admittedly high standards) after using it for a long time. The wear was definitely very gradual.
RE: Teeth Wear - mj9 - May. 16, 2017
Okay thanks for your help guys
RE: Teeth Wear - _PegasusGaming_ - May. 20, 2017
Just wanted to chip in: I got my V2 and my D2 a while ago and used excessively in battle. No signs of teeth wear. my V2 is the Reinforced, so did the reinforced version fix the teeth?
RE: Teeth Wear - mj9 - May. 20, 2017
(May. 20, 2017 3:23 AM)_PegasusGaming_ Wrote: Just wanted to chip in: I got my V2 and my D2 a while ago and used excessively in battle. No signs of teeth wear. my V2 is the Reinforced, so did the reinforced version fix the teeth?
The teeth issue was fixed as of the basic layer xcalibur release
RE: Teeth Wear - _PegasusGaming_ - May. 20, 2017
I feel like such an idiot then xD
(May. 20, 2017 3:45 AM)mj9 Wrote:(May. 20, 2017 3:23 AM)_PegasusGaming_ Wrote: Just wanted to chip in: I got my V2 and my D2 a while ago and used excessively in battle. No signs of teeth wear. my V2 is the Reinforced, so did the reinforced version fix the teeth?
The teeth issue was fixed as of the basic layer xcalibur release
I should have gotten the hint... *sighs*
Thanks though!
RE: Teeth Wear - Mage - May. 20, 2017
(May. 20, 2017 3:23 AM)_PegasusGaming_ Wrote: Just wanted to chip in: I got my V2 and my D2 a while ago and used excessively in battle. No signs of teeth wear. my V2 is the Reinforced, so did the reinforced version fix the teeth?
Nope, V2 is part of the dual layer system and all the layer's teeth are hard to wear down. The reinforced ver. only changed the wings to be stronger.
Oops, late
RE: Teeth Wear - _PegasusGaming_ - May. 20, 2017
(May. 20, 2017 4:12 AM)Mage Wrote:(May. 20, 2017 3:23 AM)_PegasusGaming_ Wrote: Just wanted to chip in: I got my V2 and my D2 a while ago and used excessively in battle. No signs of teeth wear. my V2 is the Reinforced, so did the reinforced version fix the teeth?
Nope, V2 is part of the dual layer system and all the layer's teeth are hard to wear down. The reinforced ver. only changed the wings to be stronger.
Oops, late
That's where I realized I screwed up. I assumed Valkyrie and Deathscyther to be their dual layer counterparts ;-;
RE: Teeth Wear - Mage - May. 20, 2017
But there was never a reinforced Valkyrie...
RE: Teeth Wear - Doubledealer - Jan. 27, 2022
Do gt chips have teeth wear?
RE: Teeth Wear - xros - Jan. 27, 2022
(Jan. 27, 2022 8:00 PM)Doubledealer Wrote: Do gt chips have teeth wear?
Apparently my Pro Series Spriggan chip wears a bit fast but I've heard Pro Series itself is the problem, I don't know about TT though.
RE: Teeth Wear - Doubledealer - Jan. 27, 2022
(Jan. 27, 2022 8:53 PM)xros I’m pretty sure soul Balkesh and zwei luinor had teeth wear Wrote:(Jan. 27, 2022 8:00 PM)Doubledealer Wrote: Do gt chips have teeth wear?
Apparently my Pro Series Spriggan chip wears a bit fast but I've heard Pro Series itself is the problem, I don't know about TT though.
(Jan. 27, 2022 8:59 PM)Doubledealer Wrote:(Jan. 27, 2022 8:53 PM)xros I’m pretty sure soul Balkesh and zwei luinor had teeth wear and they fixed it on future pro series gt beys Wrote: Apparently my Pro Series Spriggan chip wears a bit fast but I've heard Pro Series itself is the problem, I don't know about TT though.
Speaking of spriggan on my version of the gt chip you in there’s a sign saying a1 can anyone tell me what it means