(Feb. 14, 2019  5:06 PM)crystal azule Wrote:

(Feb. 14, 2019  1:32 PM)TheLOLManiac Wrote: Hey what if I live in another country. How do I pay then? If my money isn't the same!I really really really want my ow n custom beyblade?. I mean I could pay the amount you want just don't know how to change my money into US dollars

Honestly you can just pay with something like paypal that converts and deals with rates for you.

---

(Feb. 13, 2019  11:20 PM)trueblader51 Wrote: for number 7 i understand but for number 8 but you can't use a grocery store because when you go to a restaurant you pay after you eat and also you can pay for your groceries after you get them if you order online.

The fact for number 8 is their is no 100% secure way that either of you can keep to your deal but logically you should pay him first as in theory it would be worse for him to lose his goods then a small sum of money from you.

(Feb. 14, 2019  9:53 PM)trueblader51 Wrote:

(Feb. 14, 2019  5:06 PM)crystal azule Wrote: Honestly you can just pay with something like paypal that converts and deals with rates for you.

---

The fact for number 8 is their is no 100% secure way that either of you can keep to your deal but logically you should pay him first as in theory it would be worse for him to lose his goods then a small sum of money from you.

what if i pay half the money he sends the product then i send the rest that way if either one of us don't keep our deal we both lose something

(Nov. 15, 2018  1:23 PM)Burst3DPrinter Wrote: So I am working on a 3D Printed request service. I accept 10 requests at a time. so far ALL SPOTS ARE FULL. Here is the link to the request form: https://goo.gl/forms/LDWv0B2jH9sEEJCT2 [Closed until some of the orders are shipped]

NOTE: MY VACATION IS OVER BUT MY 3D PRINTER BROKE...(ಥ_ಥ) BUT IT WILL BE FIXED BY FEBRUARY 11TH
1.abidjkhan7 (waiting for metal)
2.ken_the360
3.IceCreeper909
4.kingbladersoul
5.crystal azule
6.omega263 (need to print)
7.Ntruder19
8.tpoez28
9.EMAIL VIA FORM (need to print)
10.EMAIL VIA FORM (need to print)

As of right now, the requests are for free but in the future it will be 
$5 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick, +$10.00 USD for all metal) for a complete bey. 
$1.50 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick +$5.00 USD for all metal) for a Layer
$2.50 USD for a Disk
$1.00  USD for a Driver (+$5.00 USD for all metal)

I also plan on making launchers and stadiums sometime in the future.

Expect the process to be lengthy because I first need to develop concept sketches then try to integrate them into my 3D modeling software.

Here are some images for one of the designs:
tpoez28 -incomplete
https://drive.google.com/file/d/1dlrRSm4q7FzAlZ6N4_YRu9mwKkYgEwzT/view?usp=sharing (CHO-Z METAL)
https://drive.google.com/file/d/1ASqlK_B4n4lj3Q8dQmGe1l-rpexBo5_b/view?usp=sharing (DRIVER)
https://drive.google.com/file/d/1XaebhOjOvgHT2vvUTR8KdFU6PktZCSXN/view?usp=sharing (DISK)
https://drive.google.com/file/d/1BUug8sZUhW1Lv1JJKEOPiBaYsFXSSQ6x/view?usp=sharing (LAYER)

Molds (4 Bladed Discs -Even Distribution)
https://drive.google.com/open?id=15g_PMOGeEo8_JR_VFesap5G98VRzbM5W

abidjkhan7 -complete
https://drive.google.com/file/d/1Z5YAjK6QGlShRdYbe8uAEogPraYp7-0P/view?usp=sharing (Layer -Gimmick, Top View)
https://drive.google.com/file/d/1Mv0hPI3ZP5Q7uQ-OCdqDrC-M1UafE1NV/view?usp=sharing  (Layer -Gimmick, Bottom View)
https://drive.google.com/file/d/1NIoxIkgKtW2oSc7B9YT4VMH2nyZcB7zx/view?usp=sharing (Layer -Gimmick, Side View)
https://drive.google.com/file/d/1m07lTKKVvpIS1uGDh3pnM3iC6uwMY1R-/view?usp=sharing (Layer -Base)
https://drive.google.com/open?id=1hE04Ic1bqdj_1oLAIdbH4zIo0IVL5Vz1 (Cho Z Metal)

(Mar. 01, 2019  4:41 AM)Charged Diamond Wrote: It’s alright if you needed to take a break. I hope you’re feeling better now. It’s great to see you back! Btw, just a question: You said that you couldn’t go Burst stoppers, Level chips, etc. But can you make it so a Beyblade cannot whatsoever? I have an idea that could make this work, and if you are interested, I can show you.

Just a question you don’t need to answer: What’s the difference between the LR of Requiem and Legend and the LR of Eclipse?

(Feb. 08, 2019  7:52 PM)BEYBLADE BEN Wrote: Can you just design me a Bey? I'm willing to pay you if you can do so. I don't need it printed, I already own a 3D printer so I just would need the files. I would give you credit on my Youtube channel. (Link down below)

(Feb. 11, 2019  4:09 AM)Adarsh Abhinav Wrote:

(Feb. 11, 2019  3:51 AM)boigamer25 Wrote: Really? I've used that before, I just didn't think that he would use it. It's actually really simple to use so I can see why he does.

Though I use different modelling softwares, But TinkerCAD is best way to start.

(Mar. 05, 2019  6:19 PM)Burst3DPrinter Wrote:

(Feb. 08, 2019  7:52 PM)BEYBLADE BEN Wrote: Can you just design me a Bey? I'm willing to pay you if you can do so. I don't need it printed, I already own a 3D printer so I just would need the files. I would give you credit on my Youtube channel. (Link down below)

Regarding just making the file, I am able to do so and the price of said file would be half of what the original price would've been if I were to print it

---

(Feb. 11, 2019  4:09 AM)Adarsh Abhinav Wrote: Though I use different modelling softwares, But TinkerCAD is best way to start.

I know how to use TinkerCAD and Autodesk Inventor PRO (because I took an engineering course at my school). I want to at some point use Inventor but it is too expensive.

(Mar. 05, 2019  6:19 PM)Burst3DPrinter Wrote:

(Feb. 08, 2019  7:52 PM)BEYBLADE BEN Wrote: Can you just design me a Bey? I'm willing to pay you if you can do so. I don't need it printed, I already own a 3D printer so I just would need the files. I would give you credit on my Youtube channel. (Link down below)

Regarding just making the file, I am able to do so and the price of said file would be half of what the original price would've been if I were to print it

---

(Feb. 11, 2019  4:09 AM)Adarsh Abhinav Wrote: Though I use different modelling softwares, But TinkerCAD is best way to start.

I know how to use TinkerCAD and Autodesk Inventor PRO (because I took an engineering courcse at my school). I want to at some point use Inventor but it is too expensive.

(Mar. 17, 2019  6:51 PM)Bluesamurai_YT Wrote: How do i send a file to get it 3d printed of i use my phone to design my bey

(Mar. 17, 2019  6:51 PM)Bluesamurai_YT Wrote: How do i send a file to get it 3d printed of i use my phone to design my bey

(Mar. 15, 2019  1:22 AM)HappyRhino Wrote:

(Mar. 05, 2019  6:19 PM)Burst3DPrinter Wrote: Regarding just making the file, I am able to do so and the price of said file would be half of what the original price would've been if I were to print it

---

I know how to use TinkerCAD and Autodesk Inventor PRO (because I took an engineering courcse at my school). I want to at some point use Inventor but it is too expensive.

What will it cost please and would the Beyblade have metal teeth?

(Mar. 18, 2019  10:28 PM)Burst3DPrinter Wrote:

(Mar. 15, 2019  1:22 AM)HappyRhino Wrote: What will it cost please and would the Beyblade have metal teeth?

It depens on if you just want the layer, if you want any gimmicks (if so how many), and if you just want the teeth to be metal.

EX 1: Full metal layer with no gimmicks is $6.50 USD

EX 2: Full metal layer with gimmicks is $6.50 USD + $0.50 USD per gimmick

EX 3: Layer with metal teeth as a gimmick: $2.00 USD

(Nov. 15, 2018  1:23 PM)Burst3DPrinter Wrote: So I am working on a 3D Printed request service. I accept 10 requests at a time. so far ALL SPOTS ARE FULL. Here is the link to the request form: https://goo.gl/forms/LDWv0B2jH9sEEJCT2 [Closed until some of the orders are shipped]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

IMPORTANT UPDATE: Regarding gimmicks, I wont be bale to do burst stoppers, levelup chips, or Requiem/Legend Spriggan's dual spin feature. 

IMPORTANT UPDATE: Regarding just making the file, I am able to do so and the price of said file would be half of what the original price would've been if I were to print it

I can't make layers that allow levelup chips because I have not been able to find Cho Z base layer files that are compatible with it. That is not to say I can't do any levelup chips, it just means you would get the levelup chip by itself without a layer that is compatible with it.

I can't do the burst stoppers because there are no files for it and because I don't know how to get it to function with the base models I use for TinkerCAD.

I can't do Spriggan's dual spin for a similar reason that I can't do the levelup chips. That is not to say I can't do any dual spin, it just means it would work like Left Artemis and Right Apollos does. I also plan on doing frames and disks compatible with frames but I am still working that out.

TL DR: I can't do these gimmicks because of the lack of files on the internet needed.

IMPORTANT UPDATE (1/3): Regarding Pricing, these are subject to change. Due to the amount of resources I have right now, only the top 3 will be able to be for free as I only have enough material to spare for those to be for free. If you are wondering why that is, I thought that I would be getting funding soon but there is a possibility that I will have nothing as prior to now, I was guaranteed some amount of money. 
                                     
[b]IMPORTANT UPDATE (2/3): [/b]If you are wondering why I am talking about funding, I am apart of a program run by a non-profit organization that helps teens create, start, and manage small businesses. This or next week is what the program calls a business expo -This is where a group of volunteers with a pool of money pick their top 5 favorite businesses to fund- due to how this works, there may be some people that end up with nothing as the volunteers are adults that know nothing about this community.

IMPORTANT UPDATE (3/3): Those that will have to pay will only have to pay 10% of the total cost. For example, if the total cost was $5.00 USD, they would pay only $0.50 USD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
abidjkhan7 (waiting for metal)
IceCreeper909
crystal azule
kingbladersoul
omega263 (need to print)
Ntruder19
tpoez28
EMAIL VIA FORM (need to print)
EMAIL VIA FORM (need to print)
 
$5 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick, +$10.00 USD for all metal) for a complete bey. 
$1.50 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick +$5.00 USD for all metal) for a Layer
$2.50 USD for a Disk
$1.00  USD for a Driver (+$5.00 USD for all metal)

1/2 of Total Cost for just Files

Expect the process to be lengthy because I first need to develop concept sketches then try to integrate them into my 3D modeling software.

Here are some images for one of the designs:
tpoez28 -incomplete
https://drive.google.com/file/d/1dlrRSm4q7FzAlZ6N4_YRu9mwKkYgEwzT/view?usp=sharing (CHO-Z METAL)
https://drive.google.com/file/d/1ASqlK_B4n4lj3Q8dQmGe1l-rpexBo5_b/view?usp=sharing (DRIVER)
https://drive.google.com/file/d/1XaebhOjOvgHT2vvUTR8KdFU6PktZCSXN/view?usp=sharing (DISK)
https://drive.google.com/file/d/1BUug8sZUhW1Lv1JJKEOPiBaYsFXSSQ6x/view?usp=sharing (LAYER)

Molds (4 Bladed Discs -Even Distribution)
https://drive.google.com/open?id=15g_PMOGeEo8_JR_VFesap5G98VRzbM5W

abidjkhan7 -complete
https://drive.google.com/file/d/1Z5YAjK6QGlShRdYbe8uAEogPraYp7-0P/view?usp=sharing (Layer -Gimmick, Top View)
https://drive.google.com/file/d/1Mv0hPI3ZP5Q7uQ-OCdqDrC-M1UafE1NV/view?usp=sharing  (Layer -Gimmick, Bottom View)
https://drive.google.com/file/d/1NIoxIkgKtW2oSc7B9YT4VMH2nyZcB7zx/view?usp=sharing (Layer -Gimmick, Side View)
https://drive.google.com/file/d/1m07lTKKVvpIS1uGDh3pnM3iC6uwMY1R-/view?usp=sharing (Layer -Base)
https://drive.google.com/open?id=1hE04Ic1bqdj_1oLAIdbH4zIo0IVL5Vz1 (Cho Z Metal)

(Mar. 20, 2019  5:57 AM)N10 Wrote:

(Mar. 18, 2019  10:28 PM)Burst3DPrinter Wrote: It depens on if you just want the layer, if you want any gimmicks (if so how many), and if you just want the teeth to be metal.

EX 1: Full metal layer with no gimmicks is $6.50 USD

EX 2: Full metal layer with gimmicks is $6.50 USD + $0.50 USD per gimmick

EX 3: Layer with metal teeth as a gimmick: $2.00 USD

How are metal teeth different from normal plastic teeth? Other than that metal teeth are much less likely to break than plastic ones.

---

(Nov. 15, 2018  1:23 PM)Burst3DPrinter Wrote: So I am working on a 3D Printed request service. I accept 10 requests at a time. so far ALL SPOTS ARE FULL. Here is the link to the request form: https://goo.gl/forms/LDWv0B2jH9sEEJCT2 [Closed until some of the orders are shipped]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

IMPORTANT UPDATE: Regarding gimmicks, I wont be bale to do burst stoppers, levelup chips, or Requiem/Legend Spriggan's dual spin feature. 

IMPORTANT UPDATE: Regarding just making the file, I am able to do so and the price of said file would be half of what the original price would've been if I were to print it

I can't make layers that allow levelup chips because I have not been able to find Cho Z base layer files that are compatible with it. That is not to say I can't do any levelup chips, it just means you would get the levelup chip by itself without a layer that is compatible with it.

I can't do the burst stoppers because there are no files for it and because I don't know how to get it to function with the base models I use for TinkerCAD.

I can't do Spriggan's dual spin for a similar reason that I can't do the levelup chips. That is not to say I can't do any dual spin, it just means it would work like Left Artemis and Right Apollos does. I also plan on doing frames and disks compatible with frames but I am still working that out.

TL DR: I can't do these gimmicks because of the lack of files on the internet needed.

IMPORTANT UPDATE (1/3): Regarding Pricing, these are subject to change. Due to the amount of resources I have right now, only the top 3 will be able to be for free as I only have enough material to spare for those to be for free. If you are wondering why that is, I thought that I would be getting funding soon but there is a possibility that I will have nothing as prior to now, I was guaranteed some amount of money. 
                                     
[b]IMPORTANT UPDATE (2/3): [/b]If you are wondering why I am talking about funding, I am apart of a program run by a non-profit organization that helps teens create, start, and manage small businesses. This or next week is what the program calls a business expo -This is where a group of volunteers with a pool of money pick their top 5 favorite businesses to fund- due to how this works, there may be some people that end up with nothing as the volunteers are adults that know nothing about this community.

IMPORTANT UPDATE (3/3): Those that will have to pay will only have to pay 10% of the total cost. For example, if the total cost was $5.00 USD, they would pay only $0.50 USD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
abidjkhan7 (waiting for metal)
IceCreeper909
crystal azule
kingbladersoul
omega263 (need to print)
Ntruder19
tpoez28
EMAIL VIA FORM (need to print)
EMAIL VIA FORM (need to print)
 
$5 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick, +$10.00 USD for all metal) for a complete bey. 
$1.50 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick +$5.00 USD for all metal) for a Layer
$2.50 USD for a Disk
$1.00  USD for a Driver (+$5.00 USD for all metal)

1/2 of Total Cost for just Files

Expect the process to be lengthy because I first need to develop concept sketches then try to integrate them into my 3D modeling software.

Here are some images for one of the designs:
tpoez28 -incomplete
https://drive.google.com/file/d/1dlrRSm4q7FzAlZ6N4_YRu9mwKkYgEwzT/view?usp=sharing (CHO-Z METAL)
https://drive.google.com/file/d/1ASqlK_B4n4lj3Q8dQmGe1l-rpexBo5_b/view?usp=sharing (DRIVER)
https://drive.google.com/file/d/1XaebhOjOvgHT2vvUTR8KdFU6PktZCSXN/view?usp=sharing (DISK)
https://drive.google.com/file/d/1BUug8sZUhW1Lv1JJKEOPiBaYsFXSSQ6x/view?usp=sharing (LAYER)

Molds (4 Bladed Discs -Even Distribution)
https://drive.google.com/open?id=15g_PMOGeEo8_JR_VFesap5G98VRzbM5W

abidjkhan7 -complete
https://drive.google.com/file/d/1Z5YAjK6QGlShRdYbe8uAEogPraYp7-0P/view?usp=sharing (Layer -Gimmick, Top View)
https://drive.google.com/file/d/1Mv0hPI3ZP5Q7uQ-OCdqDrC-M1UafE1NV/view?usp=sharing  (Layer -Gimmick, Bottom View)
https://drive.google.com/file/d/1NIoxIkgKtW2oSc7B9YT4VMH2nyZcB7zx/view?usp=sharing (Layer -Gimmick, Side View)
https://drive.google.com/file/d/1m07lTKKVvpIS1uGDh3pnM3iC6uwMY1R-/view?usp=sharing (Layer -Base)
https://drive.google.com/open?id=1hE04Ic1bqdj_1oLAIdbH4zIo0IVL5Vz1 (Cho Z Metal)

Also, hello Burst3DPrinter, I have a few things I want to say:
1) I wish you good luck at the business expo as from what you are saying, you're probably going to "fight" a uphill battle. I could see the possibility of some of the volunteers playing with beyblades when they are kids and still don't know about the WBO or its community, but you never know. Even if they don't know about the community, some of them might know that beyblade is (still) a thing and see the idea of your service. If you could do or are doing a presentation, I would recommend that you dedicate a part of the presentation getting the volunteers up to speed about the WBO and maybe some other things, but only include important details and, from my high school freshman or sophomore history teacher, get to the point.

2) I kinda interested in the program you're in. What is the schedule like and are there any requirements like age or GPA or the like? I might consider signing up if possible.

3) I find it weird that the price of a 3D model is half the full price, but the price of getting a fully made part is 10% of the full price.

(Mar. 20, 2019  11:45 AM)HappyRhino Wrote:

(Mar. 20, 2019  5:57 AM)N10 Wrote: How are metal teeth different from normal plastic teeth? Other than that metal teeth are much less likely to break than plastic ones.

---

Also, hello Burst3DPrinter, I have a few things I want to say:
1) I wish you good luck at the business expo as from what you are saying, you're probably going to "fight" a uphill battle. I could see the possibility of some of the volunteers playing with beyblades when they are kids and still don't know about the WBO or its community, but you never know. Even if they don't know about the community, some of them might know that beyblade is (still) a thing and see the idea of your service. If you could do or are doing a presentation, I would recommend that you dedicate a part of the presentation getting the volunteers up to speed about the WBO and maybe some other things, but only include important details and, from my high school freshman or sophomore history teacher, get to the point.

2) I kinda interested in the program you're in. What is the schedule like and are there any requirements like age or GPA or the like? I might consider signing up if possible.

3) I find it weird that the price of a 3D model is half the full price, but the price of getting a fully made part is 10% of the full price.

The advantage to having metal teeth it that your Beyblade won’t wear down until it’s like as burstable as dictator, which is usually the result with plastic teeth. I get what your saying about the pricing and it confuses me too

(Mar. 20, 2019  5:57 AM)N10 Wrote:

(Mar. 18, 2019  10:28 PM)Burst3DPrinter Wrote: It depens on if you just want the layer, if you want any gimmicks (if so how many), and if you just want the teeth to be metal.

EX 1: Full metal layer with no gimmicks is $6.50 USD

EX 2: Full metal layer with gimmicks is $6.50 USD + $0.50 USD per gimmick

EX 3: Layer with metal teeth as a gimmick: $2.00 USD

How are metal teeth different from normal plastic teeth? Other than that metal teeth are much less likely to break than plastic ones.

---

(Nov. 15, 2018  1:23 PM)Burst3DPrinter Wrote: So I am working on a 3D Printed request service. I accept 10 requests at a time. so far ALL SPOTS ARE FULL. Here is the link to the request form: https://goo.gl/forms/LDWv0B2jH9sEEJCT2 [Closed until some of the orders are shipped]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

IMPORTANT UPDATE: Regarding gimmicks, I wont be bale to do burst stoppers, levelup chips, or Requiem/Legend Spriggan's dual spin feature. 

IMPORTANT UPDATE: Regarding just making the file, I am able to do so and the price of said file would be half of what the original price would've been if I were to print it

I can't make layers that allow levelup chips because I have not been able to find Cho Z base layer files that are compatible with it. That is not to say I can't do any levelup chips, it just means you would get the levelup chip by itself without a layer that is compatible with it.

I can't do the burst stoppers because there are no files for it and because I don't know how to get it to function with the base models I use for TinkerCAD.

I can't do Spriggan's dual spin for a similar reason that I can't do the levelup chips. That is not to say I can't do any dual spin, it just means it would work like Left Artemis and Right Apollos does. I also plan on doing frames and disks compatible with frames but I am still working that out.

TL DR: I can't do these gimmicks because of the lack of files on the internet needed.

IMPORTANT UPDATE (1/3): Regarding Pricing, these are subject to change. Due to the amount of resources I have right now, only the top 3 will be able to be for free as I only have enough material to spare for those to be for free. If you are wondering why that is, I thought that I would be getting funding soon but there is a possibility that I will have nothing as prior to now, I was guaranteed some amount of money. 
                                     
[b]IMPORTANT UPDATE (2/3): [/b]If you are wondering why I am talking about funding, I am apart of a program run by a non-profit organization that helps teens create, start, and manage small businesses. This or next week is what the program calls a business expo -This is where a group of volunteers with a pool of money pick their top 5 favorite businesses to fund- due to how this works, there may be some people that end up with nothing as the volunteers are adults that know nothing about this community.

IMPORTANT UPDATE (3/3): Those that will have to pay will only have to pay 10% of the total cost. For example, if the total cost was $5.00 USD, they would pay only $0.50 USD
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
abidjkhan7 (waiting for metal)
IceCreeper909
crystal azule
kingbladersoul
omega263 (need to print)
Ntruder19
tpoez28
EMAIL VIA FORM (need to print)
EMAIL VIA FORM (need to print)
 
$5 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick, +$10.00 USD for all metal) for a complete bey. 
$1.50 USD (+$1.00 USD for Cho-Z, +0.50 USD per Gimmick +$5.00 USD for all metal) for a Layer
$2.50 USD for a Disk
$1.00  USD for a Driver (+$5.00 USD for all metal)

1/2 of Total Cost for just Files

Expect the process to be lengthy because I first need to develop concept sketches then try to integrate them into my 3D modeling software.

Here are some images for one of the designs:
tpoez28 -incomplete
https://drive.google.com/file/d/1dlrRSm4q7FzAlZ6N4_YRu9mwKkYgEwzT/view?usp=sharing (CHO-Z METAL)
https://drive.google.com/file/d/1ASqlK_B4n4lj3Q8dQmGe1l-rpexBo5_b/view?usp=sharing (DRIVER)
https://drive.google.com/file/d/1XaebhOjOvgHT2vvUTR8KdFU6PktZCSXN/view?usp=sharing (DISK)
https://drive.google.com/file/d/1BUug8sZUhW1Lv1JJKEOPiBaYsFXSSQ6x/view?usp=sharing (LAYER)

Molds (4 Bladed Discs -Even Distribution)
https://drive.google.com/open?id=15g_PMOGeEo8_JR_VFesap5G98VRzbM5W

abidjkhan7 -complete
https://drive.google.com/file/d/1Z5YAjK6QGlShRdYbe8uAEogPraYp7-0P/view?usp=sharing (Layer -Gimmick, Top View)
https://drive.google.com/file/d/1Mv0hPI3ZP5Q7uQ-OCdqDrC-M1UafE1NV/view?usp=sharing  (Layer -Gimmick, Bottom View)
https://drive.google.com/file/d/1NIoxIkgKtW2oSc7B9YT4VMH2nyZcB7zx/view?usp=sharing (Layer -Gimmick, Side View)
https://drive.google.com/file/d/1m07lTKKVvpIS1uGDh3pnM3iC6uwMY1R-/view?usp=sharing (Layer -Base)
https://drive.google.com/open?id=1hE04Ic1bqdj_1oLAIdbH4zIo0IVL5Vz1 (Cho Z Metal)

Also, hello Burst3DPrinter, I have a few things I want to say:
1) I wish you good luck at the business expo as from what you are saying, you're probably going to "fight" a uphill battle. I could see the possibility of some of the volunteers playing with beyblades when they are kids and still don't know about the WBO or its community, but you never know. Even if they don't know about the community, some of them might know that beyblade is (still) a thing and see the idea of your service. If you could do or are doing a presentation, I would recommend that you dedicate a part of the presentation getting the volunteers up to speed about the WBO and maybe some other things, but only include important details and, from my high school freshman or sophomore history teacher, get to the point.

2) I kinda interested in the program you're in. What is the schedule like and are there any requirements like age or GPA or the like? I might consider signing up if possible.

3) I find it weird that the price of a 3D model is half the full price, but the price of getting a fully made part is 10% of the full price.

(Mar. 20, 2019  3:07 PM)MagixG Wrote:

(Mar. 20, 2019  11:45 AM)HappyRhino Wrote: The advantage to having metal teeth it that your Beyblade won’t wear down until it’s like as burstable as dictator, which is usually the result with plastic teeth. I get what your saying about the pricing and it confuses me too

The disadvantage to metal teeth is that the teeth may not wear down themselves and might me stronger, but they'll wear down the driver, which will end up with the same, if not worse results than with plastic teeth.

(Mar. 21, 2019  12:17 AM)boigamer25 Wrote: Hi, I've been trying to get this question answered for a while now, but are spring parts possible like Valkyrie's gimmick?