+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade Products (https://worldbeyblade.org/Forum-Beyblade-Products)
+--- Thread: Product B-177 Booster Jet Wyvern.Ar.Js 1D (/Thread-Product-B-177-Booster-Jet-Wyvern-Ar-Js-1D)
RE: B-177 Wyvern Booster - Zeutron - Dec. 24, 2020
(Dec. 24, 2020 8:31 AM)LOL-y Rancher Wrote:(Dec. 24, 2020 8:20 AM)matmat30 Wrote:
Ah cool, thank you!
The Wyvern silhouette looks pretty bulky, assuming that the silhouette of the bey is tilted downwards. It looks pretty similar to Tornado Wyvern so far, with a bit rounder and less pronounced spikes which hopefully means it'll have better defense.
I'm pretty excited about this release, although it doesn't look like there's a Double Chassis sticking out. But the silhouette could just be showing Wyvern's Sparking Ring only, but I wouldn't be surprised if it came with a Single Chassis too.
Yep that’s almost definitely Wyvern. Ring shape is a somewhat new sort of thing so maybe we really can question whether it has the same gimmick or not but it’s been a long time since we have seen that gimmick on a proper layer (not a limit break layer) and it works so I would assume it’s back.
RE: B-177 Wyvern Booster - Legend27 - Dec. 24, 2020
This Wyvern should look nice
RE: B-177 Wyvern Booster - Zeutron - Dec. 24, 2020
(Dec. 24, 2020 9:14 AM)Sahaj Buttar Wrote: This Wyvern should look nice
Not a stretch to say that it probably will. Wyvern beys always look good.
Another thing to note is that the arrival of this bey could potentially create a revolution in the meta if it turns out to be good and reuses the old free spin gimmick. Back in the god era Tornado Wyvern absolutely destroyed left spinning equalization beys as well as stall combos and it was dominating for a while until it’s poor burst resistance began to hinder it. Now we are getting a Wyvern bey heavy enough to compete in the current meta that more than likely won’t have its old issue due to the existence of double chassis so if this thing has its old ability then it will probably be a decently big threat even more so than Lucifer the end. Assuming that’s the case you can then pretty much say goodbye to Lord/Tempest/World combos. Even rage may have some trouble/competition since it won’t be able to produce as much recoil if its fighting a free spin layer.
RE: B-177 Wyvern Booster - marutti - Dec. 24, 2020
Why do you still discuss Wyvern or not?飛竜 isn't Dragon it's Wyvern
Oh I see use Google Translate.
In Japan anyone don't trust Google Translate
only kids like Kindergarten or Elementary School Children use.
RE: B-177 Wyvern Booster - g2_ - Dec. 24, 2020
(Dec. 24, 2020 1:11 PM)marutti Wrote: Why do you still discuss Wyvern or not?飛竜 isn't Dragon it's WyvernSo is it 100% Wyvern?
Oh I see use Google Translate.
In Japan anyone don't trust Google Translate
only kids like Kindergarten or Elementary School Children use.
RE: B-177 Wyvern Booster - marutti - Dec. 24, 2020
Yeah it's Wyvern.
Look at beyblade burst S1 EP9 title it was 立ち上がれ飛竜(ワイバーン)
RE: B-177 Wyvern Booster - g2_ - Dec. 24, 2020
Hell yeah, I love Wyvern.
RE: B-177 Wyvern Booster - EarthHelios - Dec. 24, 2020
I saw the video of Wyvern and it looks cool
RE: B-177 Wyvern Booster - Eclipse Force - Dec. 24, 2020
Real bulky and oval shaped. Lots of tiny gaps, but its like its going for attack anyways. Just me but I highly doubt the ring has free spin. If you look at this image here, my brain is telling me the chassis looking parts are free spin, not the ring itself.
![[Image: DzFHtej.jpg]](https://i.imgur.com/DzFHtej.jpg)
RE: B-177 Wyvern Booster - Zeutron - Dec. 24, 2020
(Dec. 24, 2020 3:28 PM)Eclipse Force Wrote: Real bulky and oval shaped. Lots of tiny gaps, but its like its going for attack anyways. Just me but I highly doubt the ring has free spin. If you look at this image here, my brain is telling me the chassis looking parts are free spin, not the ring itself.
They definitely seem like chassis parts seeing as removing them would make the blades of the ring perfectly consistent. It has to have some kind of gimmick and with those kinds of contact points, free spin is really one of the only options. Of course nothings confirmed but it seems like it’s just tornado Wyvern in sparking the same way Hollow Deathscyther is similar to Killer Deathscyther. IMO I think that both the chassis and ring will be free spinning parts. Also it’s not actually oval shaped per say, the picture you have seems to be somewhat widened from the editing which gives the illusion of an oval shape.
RE: B-177 Wyvern Booster - Needforspeed - Dec. 24, 2020
From the silhouette wyvren shape look like a square i donno how this will perform but i hope they give us something new on wyvren bc free spin is taken by lucifer
RE: B-177 Wyvern Booster - Zeutron - Dec. 24, 2020
(Dec. 24, 2020 4:16 PM)Needforspeed Wrote: From the silhouette wyvren shape look like a square i donno how this will perform but i hope they give us something new on wyvren bc free spin is taken by lucifer
Not actually square shaped. The image from Zankye’s video is a bit better while the one above is actually edited.
RE: B-177 Wyvern Booster - Needforspeed - Dec. 24, 2020
(Dec. 24, 2020 4:17 PM)Zeutron Wrote:Still square ish tho(Dec. 24, 2020 4:16 PM)Needforspeed Wrote: From the silhouette wyvren shape look like a square i donno how this will perform but i hope they give us something new on wyvren bc free spin is taken by lucifer
Not actually square shaped. The image from Zankye’s video is a bit better while the one above is actually edited.
RE: B-177 Wyvern Booster - Zeutron - Dec. 24, 2020
(Dec. 24, 2020 4:19 PM)Needforspeed Wrote:(Dec. 24, 2020 4:17 PM)Zeutron Wrote: Not actually square shaped. The image from Zankye’s video is a bit better while the one above is actually edited.Still square ish tho
I suppose but we also have to take into consideration the angle it’s facing. It’s somewhat titled. The chassis parts also add to the illusion of the square shape.
RE: B-177 Wyvern Booster - Eclipse Force - Dec. 24, 2020
Tilted? It just looks like a square lol.
Actually, consider this:
Wyvron's main gimmick is free spin, its main gimmick is having free spinning parts. First is was the tip, next was the layer. It they want to follow tradition the only logical step would be to introduce a new free spin forge disc, or frame is thats even possible.
RE: B-177 Wyvern Booster - EarthHelios - Dec. 24, 2020
Oh ok TT I guess its called Square Wyvern
RE: B-177 Wyvern Booster - Eclipse Force - Dec. 24, 2020
(Dec. 24, 2020 4:24 PM)EarthHelios Wrote: Oh ok TT I guess its called Square Wyvern
Seriously though its funky.
[font="Proxima Nova Regular", "Helvetica Neue", Helvetica, Arial, sans-serif]
![[Image: IQr7KGc.jpg]](https://i.imgur.com/IQr7KGc.jpg)
[/font]
RE: B-177 Wyvern Booster - Zeutron - Dec. 24, 2020
(Dec. 24, 2020 4:21 PM)Eclipse Force Wrote: Tilted? It just looks like a square lol.
Actually, consider this:
Wyvron's main gimmick is free spin, its main gimmick is having free spinning parts. First is was the tip, next was the layer. It they want to follow tradition the only logical step would be to introduce a new free spin forge disc, or frame is thats even possible.
It is tilted. For the most part, bey silhouettes never have the layed liner up perfectly facing forward.
RE: B-177 Wyvern Booster - EarthHelios - Dec. 24, 2020
So it has like 4 or 5 blades?
RE: B-177 Wyvern Booster - Zeutron - Dec. 24, 2020
(Dec. 24, 2020 4:27 PM)EarthHelios Wrote: So it has like 4 or 5 blades?
It has 8 on the ring. It
RE: B-177 Wyvern Booster - Eclipse Force - Dec. 24, 2020
(Dec. 24, 2020 4:27 PM)Zeutron Wrote:(Dec. 24, 2020 4:21 PM)Eclipse Force Wrote: Tilted? It just looks like a square lol.
Actually, consider this:
Wyvron's main gimmick is free spin, its main gimmick is having free spinning parts. First is was the tip, next was the layer. It they want to follow tradition the only logical step would be to introduce a new free spin forge disc, or frame is thats even possible.
It is tilted. For the most part, bey silhouettes never have the layed liner up perfectly facing forward.
Hollow was facing forward, no?
RE: B-177 Wyvern Booster - Zeutron - Dec. 24, 2020
(Dec. 24, 2020 4:28 PM)Eclipse Force Wrote:(Dec. 24, 2020 4:27 PM)Zeutron Wrote: It is tilted. For the most part, bey silhouettes never have the layed liner up perfectly facing forward.
Hollow was facing forward, no?
No it wasn’t facing forward, I’m certain.
RE: B-177 Wyvern Booster - EarthHelios - Dec. 24, 2020
Who has a bad feeling there gonna play Wyvern dirty and give it Massive
RE: B-177 Wyvern Booster - Zeutron - Dec. 24, 2020
(Dec. 24, 2020 4:29 PM)EarthHelios Wrote: Who has a bad feeling there gonna play Wyvern dirty and give it Massive
If they go for massive I would assume it would be high massive although I hope they go for atomic metal tbh.
RE: B-177 Wyvern Booster - Eclipse Force - Dec. 24, 2020
(Dec. 24, 2020 4:29 PM)Zeutron Wrote:(Dec. 24, 2020 4:28 PM)Eclipse Force Wrote: Hollow was facing forward, no?
No it wasn’t facing forward, I’m certain.
it looked just like this but black
![[Image: 350?cb=20201214172758]](https://static.wikia.nocookie.net/beyblade/images/1/1b/BBSK-Hollow_Deathscyther_12Axe_High_Accel%27_4A.jpg/revision/latest/scale-to-width-down/350?cb=20201214172758)