(Mar. 03, 2019  6:59 PM)MagikHorse Wrote:

(Mar. 03, 2019  6:27 PM)Ranch+Kerbeus Wrote: So do the Beyblades have metal outsides now? Case they do, will they break or damage the older Dual and God plastic Beyblades?

If this is true, yes, they probably would. On the other hand it doesn't look like this is the case at all given the highly colored edges seen in the RBV 15 leak which insinuates that they still have plastic edges.

(Mar. 03, 2019  11:20 PM)KnightPro Wrote: Where did this whole metal contact point thing come from?? Did you guys see the leaks lol

Spoiler (Click to View)

Not as fancy as a 3D render, i know haha, but I felt like sharing regardless. Note that the Layer Weight is supposed to be sandwiched between the Layer Chip and Base, since the underside of the Weight would interfere with fitting the driver if it was situated below the Base.

(Mar. 04, 2019  1:58 AM)KnightPro Wrote: I wonder if in the show the characters will combine their bey and use them together like they did in Zero G or this might be a MFB thing where they don't use combos in the show but you can customize for fun irl.

(Mar. 03, 2019  11:14 PM)BeyCrafter Wrote:

(Mar. 03, 2019  6:59 PM)MagikHorse Wrote: If this is true, yes, they probably would. On the other hand it doesn't look like this is the case at all given the highly colored edges seen in the RBV 15 leak which insinuates that they still have plastic edges.

I say wait until Dragon is fully revealed so that we can know for sure if the main contact points are fully metal or not

(Mar. 03, 2019  11:14 PM)BeyCrafter Wrote:

(Mar. 03, 2019  6:59 PM)MagikHorse Wrote: If this is true, yes, they probably would. On the other hand it doesn't look like this is the case at all given the highly colored edges seen in the RBV 15 leak which insinuates that they still have plastic edges.

I say wait until Dragon is fully revealed so that we can know for sure if the main contact points are fully metal or not

(Mar. 04, 2019  7:14 AM)CrazyAries Wrote: Here are some of my predictions to GT system:
1. The layer is divided into 3 parts (this is almost confirmed). As there is no official name for them, I call them the Avatar core, GT Chip (the metal part we got with Driger Fang) and GT wheel. These parts could be assembled in different way to make a different layer (like Cosmo Valkyrie and Slash Valkyrie).
2. The GT wheel may have no metal on, and the GT Chip is all the metal we have for a layer (but there could be some exceptions for some very special release).
3. Both GT wheel and GT Chip has different types, and only when a GT wheel matches the GT chip's type, they could be assembled together. But Avatar core have no limitation in this case.
4. The layer will not be disassembled when the bey burst. Some special tools might be need to assemble the Layer.
5. All the Random booster prize Bey we got for GT system might have only a new GT wheel, but no new GT core or other new parts (The RB15 has only a Cosmo for the new part, all other parts are just recolors).

(Mar. 04, 2019  7:14 AM)CrazyAries Wrote: Here are some of my predictions to GT system:
1. The layer is divided into 3 parts (this is almost confirmed). As there is no official name for them, I call them the Avatar core, GT Chip (the metal part we got with Driger Fang) and GT wheel. These parts could be assembled in different way to make a different layer (like Cosmo Valkyrie and Slash Valkyrie).
2. The GT wheel may have no metal on, and the GT Chip is all the metal we have for a layer (but there could be some exceptions for some very special release).
3. Both GT wheel and GT Chip has different types, and only when a GT wheel matches the GT chip's type, they could be assembled together. But Avatar core have no limitation in this case.
4. The layer will not be disassembled when the bey burst. Some special tools might be need to assemble the Layer.
5. All the Random booster prize Bey we got for GT system might have only a new GT wheel, but no new GT core or other new parts (The RB15 has only a Cosmo for the new part, all other parts are just recolors).

(Mar. 05, 2019  4:05 PM)BeyGa Wrote: According to this site, the new March releases will be the following:

B-133 DX Starter Ace/Rock/Grand Dragon
It'll come with 3 layers: Ace, Rock and Grand
GT Chip Dragon
Layer weight
Disc
Driver
New Launcher

B-134 Booster Slash Valkyrie
Layer Slash
GT Chip Valkyrie
Layer weight
Disc
Driver

B-135 Booster Bunshin Ashura
Layer Bunshin
GT Chip Ashura
Layer weight
Disc
Driver

B-136 Entry Set (speculation)
2 Beys
BeyStadium
2 launchers

B-137 Long BeyLauncher

B-138 Long Light Launcher

---

This "layer weight" is that metal piece we've seen on the RBv14 that came along with Driger F. I'm hyped for all the combo possibilities we'll have in this new series!

(Mar. 05, 2019  6:35 PM)BeybladeFanOff Wrote:

(Mar. 05, 2019  4:05 PM)BeyGa Wrote: According to this site, the new March releases will be the following:

B-133 DX Starter Ace/Rock/Grand Dragon
It'll come with 3 layers: Ace, Rock and Grand
GT Chip Dragon
Layer weight
Disc
Driver
New Launcher

B-134 Booster Slash Valkyrie
Layer Slash
GT Chip Valkyrie
Layer weight
Disc
Driver

B-135 Booster Bunshin Ashura
Layer Bunshin
GT Chip Ashura
Layer weight
Disc
Driver

B-136 Entry Set (speculation)
2 Beys
BeyStadium
2 launchers

B-137 Long BeyLauncher

B-138 Long Light Launcher

---

This "layer weight" is that metal piece we've seen on the RBv14 that came along with Driger F. I'm hyped for all the combo possibilities we'll have in this new series!

A new BeyLogger is also confirmed.

(Mar. 04, 2019  1:07 AM)TrainiacJ Wrote: I made a little mock-up of how the GT System probably fits together based on all the leaks and stuff we've seen for a post on one of my blogs and decided to post it here for y'all to see with your eye holes :V

Spoiler (Click to View)

Not as fancy as a 3D render, i know haha, but I felt like sharing regardless. Note that the Layer Weight is supposed to be sandwiched between the Layer Chip and Base, since the underside of the Weight would interfere with fitting the driver if it was situated below the Base.

I also have a bunch of thoughts that are all very speculative-y and sorta incoherent, so approach with a grain of salt, haha

Spoiler (Click to View)

I'm fairly certain the terminology for the parts of the GT Layers is gonna be the "Layer Chip" (the clear plastic bits with the teeth like that Dragon part CoroCoro showed off), "Layer Weight" (that "gachi chip" that came with Driger F"), and "Layer Base" (the rest of the layer, like the contact points and stuff). Those were the terms that were being used on Vocarevare, and I'm guessing whoever runs that site probably translated those terms off of the RB15 box leak.

Also, I think it's extremely apparent that the Layer Weights are going to be mandatory parts and not optional accessories like Level Chips were. Since the rest of the Layer parts are likely going to be pure plastic, the Weight is probably going to be the only source of weight on the completed Layer. Not to mention that without it there would be a gap in the center of the layer, making it unable to interact with a Beylogger. I know that sounds dumb since the Beylogger is irrelevant anyway, but it's the one thing TT has stayed consistent with in their designs, and I'm pretty sure the B-133 DX Starter is coming with a Beylogger anyway??? so yeah Layer Weights are all but confirmed to be mandatory parts and included with each release h

Speaking of Layer Weights, I noticed while looking at the RB15 leaks that all of the GT System beys in it all had a symbol following their combo names after the Disc and Drive initials (for example: Cosmo Valkyrie.11.Et [symbol]), and I'm guessing this symbol is gonna refer to a Layer Weight? Going back to Vocarevare (bc theyre oh so helpful lol), they list Cosmo Valkyrie's combo as "Cosmo Valkyrie 11 Eternal TEN", so I'm guessing the symbol in reference to the Layer Weight is the japanese way of writing the number 10? So I suppose each Layer Weight is gonna have a different number attributed to it? It's confusing to think about and I just want TT to rip off the band-aid and relate a video showing off the layers and hopefully also the nomenclature for the GT Layers' initials? like how is that gonna work?? ugh if i weren't so hyped for this new system i'd be overcome by headaches over it lmao

(Mar. 06, 2019  12:49 AM)XXSYPHERXX Wrote: This new system may turn out similar to the 4D system where fusion wheels where able to change modes.
I Say this because the different Dragons Ace/Rock Etc seem to be able to switch modes.

(Mar. 06, 2019  1:44 AM)MGoldZeo Wrote:

(Mar. 06, 2019  12:49 AM)XXSYPHERXX Wrote: This new system may turn out similar to the 4D system where fusion wheels where able to change modes.
I Say this because the different Dragons Ace/Rock Etc seem to be able to switch modes.

It doesn’t seem likely because layers that can change modes generally share the same name. What’s more likely, and almost confirmed, is that they will give 3 wheels (Ace, Rock, and Gran) and the Dragon core and weight disk.

---

Not to say that it isn’t possible, just not probable.

(Mar. 06, 2019  1:44 AM)MGoldZeo Wrote:

(Mar. 06, 2019  12:49 AM)XXSYPHERXX Wrote: This new system may turn out similar to the 4D system where fusion wheels where able to change modes.
I Say this because the different Dragons Ace/Rock Etc seem to be able to switch modes.

It doesn’t seem likely because layers that can change modes generally share the same name. What’s more likely, and almost confirmed, is that they will give 3 wheels (Ace, Rock, and Gran) and the Dragon core and weight disk.

---

Not to say that it isn’t possible, just not probable.

(Mar. 07, 2019  7:53 PM)Triumph Wrote:

(Mar. 06, 2019  1:44 AM)MGoldZeo Wrote: It doesn’t seem likely because layers that can change modes generally share the same name. What’s more likely, and almost confirmed, is that they will give 3 wheels (Ace, Rock, and Gran) and the Dragon core and weight disk.

---

Not to say that it isn’t possible, just not probable.

They won't lol, just one layer base will be included!

EDIT- I'll be explaining why they're doing so when I get my PC back tonight!

(Mar. 07, 2019  8:22 PM)XXSYPHERXX Wrote:

(Mar. 06, 2019  1:44 AM)MGoldZeo Wrote: It doesn’t seem likely because layers that can change modes generally share the same name. What’s more likely, and almost confirmed, is that they will give 3 wheels (Ace, Rock, and Gran) and the Dragon core and weight disk.

---

Not to say that it isn’t possible, just not probable.

While that may probably be the case why would they waste there time create 3 different wheels when the same thing could be achieved just by create an wheel that can switch modes? Note: i do think your right about the three different wheels i just think it would save time if they just made one.