World Beyblade Organization by Fighting Spirits Inc.
*New* 3-D Printed Bey Commission - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Other (https://worldbeyblade.org/Forum-Other)
+--- Forum: Closed Threads (https://worldbeyblade.org/Forum-Closed-Threads)
+--- Thread: *New* 3-D Printed Bey Commission (/Thread-New-3-D-Printed-Bey-Commission)

Pages: 1 2 3

*New* 3-D Printed Bey Commission - Dacatman - Jan. 25, 2020

I make beys on Tinkercad and this thread will allow you give me your ideas to make and you can check out my account on Tinkercad, “Creator The Blader” and I will post the design titled Commission for: “Your Username”.



Layers:
  • Single/Dual Layers
  • God Layers (two gimmick, made three at max)
  • Super/Cho-Z (and yes, BURST STOPPERS)(One gimmick since their is metal)
  • GT (one gimmick if only base, two if base and weight fusion)
  • Infinite/Mugen Lock (Compatible w/ Big Bang Armor)(obviously no gimmicks other than the Mugen Lock and metal)
Discs:
  • Any type of Disc (one or less gimmicks if non-frame compatible, if frame compatible.
  • Frames (one gimmick if like Expand gimmick, simple)
Drivers:
  • Any single driver (one or less gimmicks)
  • Disc and Driver fusions (two or less gimmicks)
Please fill out this form: https://docs.google.com/forms/d/1fpZbS6X7s2TaD0BzWh3u_ovWu9nLo5E7yL6d8TnVwUM

I will put your designs on a list until I am done with the one before then I will say when I start and finish your design so you can check it out.

RE: *New* 3-D Printed Bey Commission - #Fafnir - Jan. 25, 2020

(Jan. 25, 2020  8:48 PM)Dacatman Wrote: I make beys on Tinkercad and this thread will allow you give me your ideas to make and you can check out my account on Tinkercad, “Creator The Blader” and I will post the design titled Commission for: “Your Username”.



Layers:
  • Single/Dual Layers
  • God Layers
  • Super/Cho-Z (and yes, BURST STOPPERS)
  • GT
  • Infinite/Mugen Lock (Compatible w/ Big Bang Armor)
Discs:
  • Any type of Disc
  • Frames
Drivers:
  • Any single driver (one or less gimmicks)
  • Disc and Driver fusions (two or less gimmicks)
I will put your designs on a list until I am done with the one before then I will say when I start and finish your design so you can check it out.

I would like to put in a request.

RE: *New* 3-D Printed Bey Commission - Dacatman - Jan. 25, 2020

(Jan. 25, 2020  8:51 PM)#Fafnir Wrote:
(Jan. 25, 2020  8:48 PM)Dacatman Wrote: I make beys on Tinkercad and this thread will allow you give me your ideas to make and you can check out my account on Tinkercad, “Creator The Blader” and I will post the design titled Commission for: “Your Username”.



Layers:
  • Single/Dual Layers
  • God Layers
  • Super/Cho-Z (and yes, BURST STOPPERS)
  • GT
  • Infinite/Mugen Lock (Compatible w/ Big Bang Armor)
Discs:
  • Any type of Disc
  • Frames
Drivers:
  • Any single driver (one or less gimmicks)
  • Disc and Driver fusions (two or less gimmicks)
I will put your designs on a list until I am done with the one before then I will say when I start and finish your design so you can check it out.

I would like to put in a request.
Ok, I updated the rules read those then put in a request.

RE: *New* 3-D Printed Bey Commission - MasterOfTheSky - Jan. 25, 2020

I would like you to create my request: can i have a cho-z layer with burst stoppers + metal
a frame as well

RE: *New* 3-D Printed Bey Commission - #Fafnir - Jan. 25, 2020

(Jan. 25, 2020  8:54 PM)Dacatman Wrote:
(Jan. 25, 2020  8:51 PM)#Fafnir Wrote: I would like to put in a request.
Ok, I updated the rules read those then put in a request.

I would like a left rotating Infinite lock layer(one piece if possible). I'd like for the layer to have 3 main contact points, and 3 sub-main contact points.

RE: *New* 3-D Printed Bey Commission - Dacatman - Jan. 25, 2020

(Jan. 25, 2020  8:58 PM)MasterOfTheSky Wrote: I would like you to create my request: can i have a cho-z layer with burst stoppers + metal with a frame as well

I need much, much more information, also I’m waiting on someone else’s request I am going to start on first.

RE: *New* 3-D Printed Bey Commission - MasterOfTheSky - Jan. 25, 2020

(Jan. 25, 2020  8:59 PM)Dacatman Wrote:
(Jan. 25, 2020  8:58 PM)MasterOfTheSky Wrote: I would like you to create my request: can i have a cho-z layer with burst stoppers + metal with a frame as well

I need much, much more information, also I’m waiting on someone else’s request I am going to start on first.

Well i figured that much

RE: *New* 3-D Printed Bey Commission - Spider Sniper - Jan. 25, 2020

I searched your name, and wow, are your Beys good!

RE: *New* 3-D Printed Bey Commission - Dacatman - Jan. 25, 2020

(Jan. 25, 2020  8:59 PM)#Fafnir Wrote:
(Jan. 25, 2020  8:54 PM)Dacatman Wrote: Ok, I updated the rules read those then put in a request.

I would like a left rotating Infinite lock layer(one piece if possible).  I'd like for the layer to have 3 main contact points, and 3 sub-main contact points.

Ok, let me finish up the infinite lock system then make it left spin, I’ll be working on the contact points until then.

RE: *New* 3-D Printed Bey Commission - #Fafnir - Jan. 25, 2020

(Jan. 25, 2020  9:02 PM)Dacatman Wrote:
(Jan. 25, 2020  8:59 PM)#Fafnir Wrote: I would like a left rotating Infinite lock layer(one piece if possible).  I'd like for the layer to have 3 main contact points, and 3 sub-main contact points.

Ok, let me finish up the infinite lock system then make it left spin, I’ll be working on the contact points until then.

Awesome, thanks!

RE: *New* 3-D Printed Bey Commission - Dacatman - Jan. 25, 2020

(Jan. 25, 2020  9:03 PM)#Fafnir Wrote:
(Jan. 25, 2020  9:02 PM)Dacatman Wrote: Ok, let me finish up the infinite lock system then make it left spin, I’ll be working on the contact points until then.

Awesome, thanks!

I also need an avatar to incorporate into the design.

RE: *New* 3-D Printed Bey Commission - MasterOfTheSky - Jan. 25, 2020

(Jan. 25, 2020  9:00 PM)MasterOfTheSky Wrote:
(Jan. 25, 2020  8:59 PM)Dacatman Wrote: I need much, much more information, also I’m waiting on someone else’s request I am going to start on first.

Well i figured that much

Can i have a cho z beyblade with two metal swords left spinning, 2 burst stoppers and can the frame be based on the slash valkyrie base with 3 contact points and about as big as glaive. Can you base the avatar design of the beyblade on the Erymanthian Boar (from Greek mythology) my tinker cad username is UnionAchilles

RE: *New* 3-D Printed Bey Commission - MasterOfTheSky - Jan. 25, 2020

your designs are nice i especially like centennial dragon!

RE: *New* 3-D Printed Bey Commission - Dacatman - Jan. 25, 2020

(Jan. 25, 2020  9:00 PM)Spider Sniper Wrote: I searched your name, and wow, are your Beys good!

Thank you!

RE: *New* 3-D Printed Bey Commission - #Fafnir - Jan. 25, 2020

(Jan. 25, 2020  9:04 PM)Dacatman Wrote:
(Jan. 25, 2020  9:03 PM)#Fafnir Wrote: Awesome, thanks!

I also need an avatar to incorporate into the design.

Hmm, what about a warrior wielding an axe?

RE: *New* 3-D Printed Bey Commission - Dacatman - Jan. 25, 2020

(Jan. 25, 2020  9:10 PM)#Fafnir Wrote:
(Jan. 25, 2020  9:04 PM)Dacatman Wrote: I also need an avatar to incorporate into the design.

Hmm, what about a warrior wielding a axe?

Ok...

RE: *New* 3-D Printed Bey Commission - Spider Sniper - Jan. 25, 2020

(Jan. 25, 2020  9:10 PM)Dacatman Wrote:
(Jan. 25, 2020  9:00 PM)Spider Sniper Wrote: I searched your name, and wow, are your Beys good!

Thank you!

Np, credit is where credit is due

RE: *New* 3-D Printed Bey Commission - The Rex - Jan. 26, 2020

I’m thinking about making a order

RE: *New* 3-D Printed Bey Commission - djdrago5673 - Jan. 26, 2020

I would like to request if you don't mind

RE: *New* 3-D Printed Bey Commission - Dacatman - Jan. 26, 2020

(Jan. 26, 2020  12:40 AM)djdrago5673 Wrote: I would like to request if you don't mind

I don’t.

RE: *New* 3-D Printed Bey Commission - KnightPro - Jan. 26, 2020

Hi could I request??

RE: *New* 3-D Printed Bey Commission - Dacatman - Jan. 26, 2020

(Jan. 26, 2020  1:04 AM)KnightPro Wrote: Hi could I request??

Sure?

RE: *New* 3-D Printed Bey Commission - BuilderROB - Jan. 26, 2020

I have a commission:

Urgent Ursa

Energy Layer: Urgent Ursa
Urgent Ursa is a left spin dual layer attack type. There are blades that look like Achilles’ top and bottom blades but in left spin. To the left and right are Spears. They are shaped similar to a Xcalibur sword tip, but instead of a sword, they are spears. The spear had two heads. The bit beast is a armored bear that is getting ready to grab its spear by the teeth. In between the blades and the spears are Ursa’s golden claws.

[Image: 3fr5ym.jpg]

By the way it has no metal. Also make it more round please, as my drawing was very oval like but I don't want it that way in real life.

RE: *New* 3-D Printed Bey Commission - KnightPro - Jan. 26, 2020

(Jan. 26, 2020  1:06 AM)Dacatman Wrote:
(Jan. 26, 2020  1:04 AM)KnightPro Wrote: Hi could I request??

Sure?

Bey Name: Control Ifrit 
The Layer base is similar to the original ifrit but has more contact points that portrude similar to bigbang genesis. It is a orange color scheme and the blades are orange aswell.

Layer Type: Super Z | GIMMICK: When launched, the control layer base has a tighter spring due to the driver ''Poise''

Driver: Poise | an electric disk and driver with the shape of hybrid and the tip has a liner wheel. When activated the liner wheel revs up allowing the bey to spawn sparratic movements.

RE: *New* 3-D Printed Bey Commission - Orbit - Jan. 26, 2020

Can you make a Cho z bey that is much like archer Hercules but is more oval shaped, and instead of the metal bows coming out only while it has high spin speeds, it is now a big burst stopper. It is called Cho z Hercules also in between the two bows there is some spike supposed to symbolize an arrow head, take that away, it lowers attack power and I’m going for something like flash.
Layer: Cho Z Hercules - like archer but more oval-shaped, bows are burst stoppers, and remove things that lowers the amount of recoil.
Disk: 10
Frame: Cross
Driver: Low