(Jan. 05, 2018  3:10 AM)MonoDragon Wrote: 1. No one knows yet. Early signs say it's not nearly as good as Drain Fafnir due to having only two points of rubber contact

2/3.  Ask that in the Buying Section

4. Yes, while not as tight as A1 Mold God Chips, they're still tight and are great on Layers with already great teeth such as Sieg Xcalibur and Alter Chronos

5. The spring is meant to absorb and minimize impacts from launch and battle. In practice though, it does nothing (no pun intended)

6. Despite how the Disk looks, it's perfectly balanced and performance on't change no matter what orientation it's in

7. It's meant to stabilize a Beyblade if launched at too much of an angle. Performance wise I would call Kries Satan a 5 or a 6. There are better Defense Layers with better stamina and Burst resistance such as Alter Chronos and Drain Fafnir

(Jan. 05, 2018  3:14 AM)Kreissatan4ever Wrote:

(Jan. 05, 2018  3:10 AM)MonoDragon Wrote: 1. No one knows yet. Early signs say it's not nearly as good as Drain Fafnir due to having only two points of rubber contact

2/3.  Ask that in the Buying Section

4. Yes, while not as tight as A1 Mold God Chips, they're still tight and are great on Layers with already great teeth such as Sieg Xcalibur and Alter Chronos

5. The spring is meant to absorb and minimize impacts from launch and battle. In practice though, it does nothing (no pun intended)

6. Despite how the Disk looks, it's perfectly balanced and performance on't change no matter what orientation it's in

7. It's meant to stabilize a Beyblade if launched at too much of an angle. Performance wise I would call Kries Satan a 5 or a 6. There are better Defense Layers with better stamina and Burst resistance such as Alter Chronos and Drain Fafnir

How do I get to the buying section and could you go more in depth with the metal god chips also what do you mean by A1 mold, do you mean the god chips that originally come with each god bey?

(Jan. 05, 2018  3:19 AM)MonoDragon Wrote:

(Jan. 05, 2018  3:14 AM)Kreissatan4ever Wrote: How do I get to the buying section and could you go more in depth with the metal god chips also what do you mean by A1 mold, do you mean the god chips that originally come with each god bey?

https://imgur.com/a/TvsGb

"A1" refers to the mold used for the God Chips. You can see the letter and number on the underside of every God Chip

A1 God Chips are the thickest and thus press down on the teeth more, making a combination tighter and harder to Burst. Metal God Chips (at least the ones I have) are A3. Some releases have A1 God Chips, others have God Chips that are designated B or C which are looser. Basically, A God Chips are good, A1 is best.

And before you ask, I don't know which releases have what molds

(Jan. 05, 2018  3:29 AM)Kreissatan4ever Wrote:

(Jan. 05, 2018  3:19 AM)MonoDragon Wrote: https://imgur.com/a/TvsGb

"A1" refers to the mold used for the God Chips. You can see the letter and number on the underside of every God Chip

A1 God Chips are the thickest and thus press down on the teeth more, making a combination tighter and harder to Burst. Metal God Chips (at least the ones I have) are A3. Some releases have A1 God Chips, others have God Chips that are designated B or C which are looser. Basically, A God Chips are good, A1 is best.

And before you ask, I don't know which releases have what molds

Ah okay thanks for telling me


Also which releases have what molds? Just kidding but on the topic of them are the ones you have who have them ere hasbro, TT or both? If they are TT which is the kind I have what we could do is compare what god layers beys do you have that use god chips and if we do have at least some beys we could compare them to see if there are types of god chips certain beys share/could possible share/differ with god chip molds even if it’s a small sample group it could help figure things out to some extent

(Jan. 05, 2018  3:30 AM)MonoDragon Wrote:

(Jan. 05, 2018  3:29 AM)Kreissatan4ever Wrote: Ah okay thanks for telling me


Also which releases have what molds? Just kidding but on the topic of them are the ones you have who have them ere hasbro, TT or both? If they are TT which is the kind I have what we could do is compare what god layers beys do you have that use god chips and if we do have at least some beys we could compare them to see if there are types of god chips certain beys share/could possible share/differ with god chip molds even if it’s a small sample group it could help figure things out to some extent

Hasbro Evolution/Switch-Strike Layers have non-removable God Chips

(Jan. 05, 2018  3:33 AM)Kreissatan4ever Wrote:

(Jan. 05, 2018  3:30 AM)MonoDragon Wrote: Hasbro Evolution/Switch-Strike Layers have non-removable God Chips

Oh, I don’t have any hasbro god beys so I didn’t know. So what TT god beys do you have? Also I have an unrelated side question what is the use for each of the accessories used for the TT burst launcher grip?

(Jan. 05, 2018  3:35 AM)MonoDragon Wrote:

(Jan. 05, 2018  3:33 AM)Kreissatan4ever Wrote: Oh, I don’t have any hasbro god beys so I didn’t know. So what TT god beys do you have? Also I have an unrelated side question what is the use for each of the accessories used for the TT burst launcher grip?

To be honest, other than the grips, pretty much every grip accessory doesn't do anything in practice

(Jan. 05, 2018  3:36 AM)Kreissatan4ever Wrote:

(Jan. 05, 2018  3:35 AM)MonoDragon Wrote: To be honest, other than the grips, pretty much every grip accessory doesn't do anything in practice

What about the one knuckle grip?

(Jan. 05, 2018  3:38 AM)MonoDragon Wrote:

(Jan. 05, 2018  3:36 AM)Kreissatan4ever Wrote: What about the one knuckle grip?

By grips I meant things like grip rubbers or the heavy grips as preference of feel depends on the person.

The knuckle grip is garbage and completely uncomforable

(Jan. 05, 2018  3:46 AM)Kreissatan4ever Wrote:

(Jan. 05, 2018  3:38 AM)MonoDragon Wrote: By grips I meant things like grip rubbers or the heavy grips as preference of feel depends on the person.

The knuckle grip is garbage and completely uncomforable

Okay I get it. My hand is a bit too large for the grip thickness wise which grip should I use? also I’ve seen grips where there’s spots shaped for each of the fingers similar to how the handles of some guns are.

Btw sorry if I’m asking too many questions.

(Jan. 05, 2018  4:01 AM)MonoDragon Wrote:

(Jan. 05, 2018  3:46 AM)Kreissatan4ever Wrote: Okay I get it. My hand is a bit too large for the grip thickness wise which grip should I use? also I’ve seen grips where there’s spots shaped for each of the fingers similar to how the handles of some guns are.

Btw sorry if I’m asking too many questions.

Get the B-60 Grip weights. They'll make the grip thicker

(Jan. 05, 2018  4:24 AM)Kreissatan4ever Wrote:

(Jan. 05, 2018  4:01 AM)MonoDragon Wrote: Get the B-60 Grip weights. They'll make the grip thicker

Where can I get them? Also on the top of the god chip molds my galaxy zeus doesn’t have a number

(Jan. 05, 2018  4:54 AM)MonoDragon Wrote:

(Jan. 05, 2018  4:24 AM)Kreissatan4ever Wrote: Where can I get them? Also on the top of the god chip molds my galaxy zeus doesn’t have a number

Dunno

Look at the bottom of the god chip

(Jan. 05, 2018  4:55 AM)Kreissatan4ever Wrote:

(Jan. 05, 2018  4:54 AM)MonoDragon Wrote: Dunno

Look at the bottom of the god chip

I did look

(Jan. 05, 2018  5:09 AM)MonoDragon Wrote:

(Jan. 05, 2018  4:55 AM)Kreissatan4ever Wrote: I did look

https://youtu.be/sVi39J9QrK8

(Jan. 05, 2018  5:19 AM)Kreissatan4ever Wrote:

(Jan. 05, 2018  5:09 AM)MonoDragon Wrote: https://youtu.be/sVi39J9QrK8

The only a1 I have is for sieg xcalibur

(Jan. 05, 2018  5:21 AM)MonoDragon Wrote:

(Jan. 05, 2018  5:19 AM)Kreissatan4ever Wrote: The only a1 I have is for sieg xcalibur

Then take it out and put it on a Beyblade with weak teeth

(Jan. 05, 2018  5:22 AM)Kreissatan4ever Wrote:

(Jan. 05, 2018  5:21 AM)MonoDragon Wrote: Then take it out and put it on a Beyblade with weak teeth

I haven’t used my god layers at all so the teeth are pretty much mint

(Jan. 05, 2018  5:26 AM)MonoDragon Wrote:

(Jan. 05, 2018  5:22 AM)Kreissatan4ever Wrote: I haven’t used my god layers at all so the teeth are pretty much mint

By weak, I mean Beyblades that have short teeth to begin with

(Jan. 05, 2018  2:25 PM)ptf606 Wrote: MonoDragon
Which is better? A2 or A3? They are my MGC numbers. Also should I replace my B3 aC god chip with my A3 one that came with sX?

(Jan. 05, 2018  3:37 PM)MonoDragon Wrote:

(Jan. 05, 2018  2:25 PM)ptf606 Wrote: MonoDragon
Which is better? A2 or A3? They are my MGC numbers. Also should I replace my B3 aC god chip with my A3 one that came with sX?

I think A2 is better.

Alter Chronos already has great teeth so you can use a Metal God Chip or an A God Chip depending on if you want more weight or not

(Jan. 05, 2018  6:26 PM)Kreissatan4ever Wrote:

(Jan. 05, 2018  3:37 PM)MonoDragon Wrote: I think A2 is better.

Alter Chronos already has great teeth so you can use a Metal God Chip or an A God Chip depending on if you want more weight or not

What beys benefit most from metal god chips?