(Dec. 21, 2020 9:54 PM)6Jupiter5 Wrote: [ -> ] (Dec. 21, 2020 9:51 PM)Master_chanter0 Wrote: [ -> ]No, you didn't then. Ok I see what you mean.
Supports is a thing you can add when slicing the file (turning it from .stl or .obj to .gcode which is the only file 3D printers can use) that is added to support (hence the name) suspended parts of the file or unstable ones. They are useful like if you want to print, say, a turtle the supports would go under the head. Alright, this has been my technology lesson for the day.
Ok. Do you know any way to make it fit on my launcher?
So by the looks of it it looks like the slots for the protrusions on the disc are open enough that if you extend the middle part a bit towards that thinning the slot
it should fit on a launcher fine.
(Oct. 07, 2020 12:08 AM)GreenK9148 Wrote: [ -> ]Uh, yeah. I learned how to do it. I'm a beginner, and my only platform is tinkercad. But, I'll try my best. Request cap is 5. Keep in mind that these might be paid commissions based on the time I take to do them.
Poll: Just pm me what 4D MFB bey you think I’m designing. Title the pm of the bey and your username. (All excluding phantom Orion)
Commissions:
Samurai Ifrit evo:
Sparking Amatarios:
Custom bey:
Custom bey:
Uh hi I was wondering if I could still commission you to make a bey
(Dec. 24, 2020 6:11 AM)Challen Wrote: [ -> ] (Oct. 07, 2020 12:08 AM)GreenK9148 Wrote: [ -> ]Uh, yeah. I learned how to do it. I'm a beginner, and my only platform is tinkercad. But, I'll try my best. Request cap is 5. Keep in mind that these might be paid commissions based on the time I take to do them.
Poll: Just pm me what 4D MFB bey you think I’m designing. Title the pm of the bey and your username. (All excluding phantom Orion)
Commissions:
Samurai Ifrit evo:
Sparking Amatarios:
Custom bey:
Custom bey:
Uh hi I was wondering if I could still commission you to make a bey
Yes, but it will be a paid commission.
(Dec. 24, 2020 4:29 PM)GreenK9148 Wrote: [ -> ] (Dec. 24, 2020 6:11 AM)Challen Wrote: [ -> ]Uh hi I was wondering if I could still commission you to make a bey
Yes, but it will be a paid commission.
Ok uh do you have a price sheet for like different generations or would the price be determined after I like show the bey design and stuff
(Dec. 24, 2020 7:59 PM)Challen Wrote: [ -> ] (Dec. 24, 2020 4:29 PM)GreenK9148 Wrote: [ -> ]Yes, but it will be a paid commission.
Ok uh do you have a price sheet for like different generations or would the price be determined after I like show the bey design and stuff
It’s based on the time it takes him. So it would be the second choice
(Dec. 24, 2020 7:59 PM)Challen Wrote: [ -> ] (Dec. 24, 2020 4:29 PM)GreenK9148 Wrote: [ -> ]Yes, but it will be a paid commission.
Ok uh do you have a price sheet for like different generations or would the price be determined after I like show the bey design and stuff
It would be the second one. But generally I do similar prices for different generations. Right now Sparking is the cheapest, because most people have requested that.
I do think you should mention that this is layer only or else people are going to go crazy and ask for chassis and drivers.
(Dec. 24, 2020 8:09 PM)GreenK9148 Wrote: [ -> ] (Dec. 24, 2020 7:59 PM)Challen Wrote: [ -> ]Ok uh do you have a price sheet for like different generations or would the price be determined after I like show the bey design and stuff
It would be the second one. But generally I do similar prices for different generations. Right now Sparking is the cheapest, because most people have requested that.
Ok thank you for clarifying I shall consider it
(Dec. 24, 2020 8:09 PM)GreenK9148 Wrote: [ -> ] (Dec. 24, 2020 7:59 PM)Challen Wrote: [ -> ]Ok uh do you have a price sheet for like different generations or would the price be determined after I like show the bey design and stuff
It would be the second one. But generally I do similar prices for different generations. Right now Sparking is the cheapest, because most people have requested that.
Btw would I just pm you to commission you or what is the process and are there any normal prices
(Dec. 24, 2020 8:18 PM)Challen Wrote: [ -> ] (Dec. 24, 2020 8:09 PM)GreenK9148 Wrote: [ -> ]It would be the second one. But generally I do similar prices for different generations. Right now Sparking is the cheapest, because most people have requested that.
Ok thank you for clarifying I shall consider it
(Dec. 24, 2020 8:09 PM)GreenK9148 Wrote: [ -> ]It would be the second one. But generally I do similar prices for different generations. Right now Sparking is the cheapest, because most people have requested that.
Btw would I just pm you to commission you or what is the process and are there any normal prices
We would talk about it over pms. Feel free to pm me about your commission.
K, So the file for the 4D bey is Omega Dragonis. I have ordered it on shapeways and I will post a picture of it when it arrives.
(Jan. 19, 2021 11:42 PM)GreenK9148 Wrote: [ -> ]K, So the file for the 4D bey is Omega Dragonis. I have ordered it on shapeways and I will post a picture of it when it arrives.
I recommend using 0 wall and a short attack type tip to simulate it the best.
Wow, I just looked back at most of my older models, and they are really bad. (except for tempo, because I edit it from time to time). Anyway, here's a Mandalorian sparking chip that I made. (I credited people in the description of the tinkercad file).
Mando chip:
https://www.tinkercad.com/things/fsD6JAj...rking-chip
If this post gets 10 likes. Then I will do a ring for it. The ring will have an armor gimmick to it.
(Jan. 19, 2021 11:42 PM)GreenK9148 Wrote: [ -> ]K, So the file for the 4D bey is Omega Dragonis. I have ordered it on shapeways and I will post a picture of it when it arrives.
Can we see the bey on tinker cad?
(Feb. 09, 2021 12:46 AM)GreenK9148 Wrote: [ -> ]If this post gets 10 likes. Then I will do a ring for it. The ring will have an armor gimmick to it.
I think that it shouldn't be like phoenix, maybe you could make like the ring jet but it get stuck instead of ejecting and you could spin it back to regen like when you're assembling a bey, I don't know if you will understand it and if you can do it but anyway just saying.
(Feb. 10, 2021 10:18 PM)Hollowmind8 Wrote: [ -> ] (Feb. 09, 2021 12:46 AM)GreenK9148 Wrote: [ -> ]If this post gets 10 likes. Then I will do a ring for it. The ring will have an armor gimmick to it.
I think that it shouldn't be like phoenix, maybe you could make like the ring jet but it get stuck instead of ejecting and you could spin it back to regen like when you're assembling a bey, I don't know if you will understand it and if you can do it but anyway just saying.
Too hard to make for someone who isn’t an expert.
(Feb. 10, 2021 10:18 PM)Hollowmind8 Wrote: [ -> ] (Feb. 09, 2021 12:46 AM)GreenK9148 Wrote: [ -> ]If this post gets 10 likes. Then I will do a ring for it. The ring will have an armor gimmick to it.
I think that it shouldn't be like phoenix, maybe you could make like the ring jet but it get stuck instead of ejecting and you could spin it back to regen like when you're assembling a bey, I don't know if you will understand it and if you can do it but anyway just saying.
not like phoenix armor. Like 4D metal fight armor. But, I may be able to do that. Like, regaining clicks, not spin right? The idea of that has been in my head for while now. I think I can do that though.
Its like a layer with a layer, but the 2° layer is in the same place as jet ring free spinning and act like phoenix armor, but doesn't eject and isn't free spinning, so when a bey hit the armor, the armor loose clicks but not the bey
, my request is Ryuga with L Drago's avatar