Quote:Note: Kindly refer to the picture provided for this name of the separated parts.

The griffolyon figure consist of three main units namely Head & body unit, Wing unit (x2), Leg unit ( Right x2, Left x2 ). The Body unit is comprises of two parts that are Upper part & Tail part, while the Wing unit consist of three parts known as Upper part, Middle part & Lower part. The Leg unit is then also separated into three parts, which are Thigh part, Calf part & Claw part.

Griffolyon figure
[Image: griffoloyonfigurelabell.jpg]


While in the Griffolyon Hidden Spirit Beyblade Form, the figure of the Griffolyon will form two layers of circular ring named as Griffon unit ( upper layer of ring) and Leg’s ring unit ( lower layer of the ring ). Together, the Head & body unit, and the Wing unit of the Griffolyon figure will form the Griffon unit where as the Leg units will form the Leg’s ring unit.

Griffolyon Hidden Spirit Beyblade Form
[Image: sideviewm.jpg]

Griffon unit
[Image: 061020121153.jpg]

Leg's Ring unit
[Image: dsc0240jk.jpg]


Note: Kindly refer to the original sheet of the instruction for the griffolyon’s transforming guide and the pictures provided for parts assembly.

Instruction sheet
[Image: scansheetgriffolyoninst.jpg]

Leg units set up
[Image: dsc0241x.jpg]

Horizontal peg and Vertical peg
[Image: labelledlegunit.jpg]

• 1. Disassemble the wings and the legs from the body unit. The Head unit together with the Tail unit is rotated for 180 degree while they remain attached to the Upper part of the Body unit.
  
  2. The Upper part and the Middle part of a wing unit are folded until it is aligned with the Lower part of the wing unit. Do the same for the other wing unit.
  
  3. Both of the Wing units are combined together and is attached to the two holes that exist between the Upper part and the Lower part of the Body unit that forms the upper layer of the circular ring in which form Griffon unit.
  
  4. As for the Leg units, the Calf part is folded up and the Claw part is rotated for 270 degree.
  
  5. While the Left leg units are placed so that it is upside down (flipped) and the Right leg units are place the other way round, each of the left leg is then placed next to the right left in the form a ring. Next, the ‘horizontal peg’ of the Right leg units are fitted into the holes of the flipped Left leg units, while the ‘horizontal peg’ of the Left leg units are fitted into the holes on the Right leg units. Each of the holes can be found at the upper part of the Thigh part of every leg unit. Each of the claw unit is then clipped on each of the corresponding ‘vertical pegs’ that are located on the lower part of the Thigh part of every leg unit. The combined Leg units will then form the lower layer of the circular ring that will form the Griffolyon Hidden Spirit Beyblade Form.
  
  6. The pegs on the Griffolyon Base are inserted into the upper holes of the Griffon unit while the pegs on the Leg’s circular ring unit are attached into the lower holes of the Griffon unit.
  
  7. The Griffolyon Hidden Spirit Beyblade Form is now ready for display.
  

(Oct. 24, 2012  10:03 PM)Cannon Wrote: In paint, you can resize it by putting your picture in there, then clicking the Resize tool somewhat near the Select tool.

(Oct. 25, 2012  1:05 PM)Nocto Wrote: We really don't want them re-sized for the article, some of them don't even reach 600px height.
All we should do is force them to appear smaller on the screen, without actually making them smaller. And I'm guessing that's all Kai-V wanted in the first place.

Spoiler (Click to View)

[Image: griffoloyonfigurelabell.jpg]
[Image: sideviewm.jpg]
[Image: 061020121153.jpg]
[Image: dsc0240jk.jpg]
[Image: scansheetgriffolyoninst.jpg]
[Image: dsc0241x.jpg]
[Image: labelledlegunit.jpg]