World Beyblade Organization by Fighting Spirits Inc.
[Plastics] :: Q&A Thread - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade Customizations (https://worldbeyblade.org/Forum-Beyblade-Customizations)
+---- Forum: Plastic and HMS Customizations (https://worldbeyblade.org/Forum-Plastic-and-HMS-Customizations)
+---- Thread: [Plastics] :: Q&A Thread (/Thread-Plastics-Q-A-Thread)



RE: [Plastics] :: Q&A Thread - Poseidon - Aug. 09, 2014

Honestly, if you're using paypal, there's really no/ minimal risk. You can make a case ect if you've been scammed.

The questions already been replyed too, please stop asking so often, be patient- even if it wasn't answered.


RE: [Plastics] :: Q&A Thread - ~Stoney~ - Aug. 09, 2014

(Aug. 09, 2014  9:47 PM)tails375 Wrote: how much is drigger v worth un boxed built?

Read my last post instead of asking a third time, please.


RE: [Plastics] :: Q&A Thread - Neo - Aug. 09, 2014

Um..
I have a NIB Dragoon V2 RC, and it doesn't seem to work? I'm using alkaline batteries.

(Aug. 09, 2014  9:40 PM)JinbeeTheShark Wrote: What about a Flash Leopard 2 that is new but not in box?(It's Worth)

There's some on eBay for $63 something.


RE: [Plastics] :: Q&A Thread - Poseidon - Aug. 09, 2014

Flash leopard two is not worth nearly as much as that. Mint condition I'd say 25 max, that's probably pushing it as well.
You can find them in lots pretty easily.


RE: [Plastics] :: Q&A Thread - Jinbee - Aug. 09, 2014

Ah, thanks, still it's good that its cheap so people could replace it easily.


RE: [Plastics] :: Q&A Thread - Neo - Aug. 09, 2014

(Aug. 09, 2014  10:35 PM)Poseidon Wrote: Flash leopard two is not worth nearly as much as that. Mint condition I'd say 25 max, that's probably pushing it as well.
You can find them in lots pretty easily.

I've never seen one in a lot. I saw an attack ring. That's it.
It wasn't a big Hasbro release..


RE: [Plastics] :: Q&A Thread - Poseidon - Aug. 09, 2014

No way, I've got tons. Trust me, it's not worth that much.


RE: [Plastics] :: Q&A Thread - Neo - Aug. 09, 2014

(Aug. 09, 2014  10:58 PM)Poseidon Wrote: No way, I've got tons. Trust me, it's not worth that much.

I was talking NIB Takara..


RE: [Plastics] :: Q&A Thread - Poseidon - Aug. 09, 2014

Either way, it's quite a common release, not as rare as you're making it out to be.


RE: [Plastics] :: Q&A Thread - Neo - Aug. 09, 2014

(Aug. 09, 2014  11:02 PM)Poseidon Wrote: Either way, it's quite a common release, not as rare as you're making it out to be.

It's rarer then V2 Beyblades so..
Anyways, know what batteries I use for RC?


RE: [Plastics] :: Q&A Thread - Poseidon - Aug. 09, 2014

...nah haha
Might not be the batteries that are the problem, unless it's say the light not flashing or whatever. Are you using the right launcher, as only that launchers frequenxy would work, I'm guessing?


RE: [Plastics] :: Q&A Thread - Neo - Aug. 09, 2014

(Aug. 09, 2014  11:23 PM)Poseidon Wrote: ...nah haha
Might not be the batteries that are the problem, unless it's say the light not flashing or whatever. Are you using the right launcher, as only that launchers frequenxy would work, I'm guessing?

Uh..it flashes for a second...sometimes.


RE: [Plastics] :: Q&A Thread - Poseidon - Aug. 09, 2014

Well, try some fresh batteries I guess. I'm not sure what other batteries would work, but it could be that the controllers faulty.


RE: [Plastics] :: Q&A Thread - Neo - Aug. 09, 2014

(Aug. 09, 2014  11:26 PM)Poseidon Wrote: Well, try some fresh batteries I guess. I'm not sure what other batteries would work, but it could be that the controllers faulty.

I got it to charge.
How long do I charge and how do I control it in battle?


RE: [Plastics] :: Q&A Thread - Poseidon - Aug. 09, 2014

You just pull on that trigger I believe. https://www.youtube.com/watch?v=Xc8zUACwlo8
Try a half a hour, and work from there


RE: [Plastics] :: Q&A Thread - Neo - Aug. 09, 2014

(Aug. 09, 2014  11:34 PM)Poseidon Wrote: You just pull on that trigger I believe. https://www.youtube.com/watch?v=Xc8zUACwlo8
Try a half a hour, and work from there

So charge for 1/2 hour?0


RE: [Plastics] :: Q&A Thread - Poseidon - Aug. 09, 2014

Yeah, and if that's not enough do some more at say quarter hour intervals.


RE: [Plastics] :: Q&A Thread - V2 - Aug. 10, 2014

(Aug. 09, 2014  8:06 PM)Neo Wrote:
(Aug. 09, 2014  4:34 PM)BrioShield Wrote:
(Aug. 09, 2014  4:52 AM)Neo Wrote: Knight Dranzer doesn't count.
Search beyblade lot; vintage beyblade on eBay a lot. Always check ending soonest. Watch lots with Dranzer's.
I could even sell you a Dranzer F if ya wanted.

(Aug. 09, 2014  5:54 AM)Wombat Wrote: Yes, it's a Dranzer. But so is Master Dranzer who looks just like Metal Draciel and has an AR called Turtle Survivor.

Your best bet is to look on the Selling and Trading forum here on the WBO. Someone will probably sell you S/F/V/ACB for under $20.

He never even specified he was looking for a "Kai anime version Dranzer".
Dranzer King's point is a fair one. Whether Knight Dranzer "counts" or not is up to the person asking the question.
It just isn't a very good Beyblade. He could find a Dranzer S/F for under $20, which I'm sure is the kind he wants.



LISTEN:

He said he wanted a Dranzer beyblade.
Dranzer King suggested Knight Dranzer.

You didn't say "there are better Dranzers for the same price" or "It's not your best choice", you said
"Knight Dranzer doesn't count" and you really aren't in the position to say what counts or not.

(Aug. 09, 2014  8:20 AM)KirbyRobot Wrote: Guys I don't plan on buying things from forums, my family is always suspicious so sorry, and besides I only trust official websites with official people, who will actually send you an Item, and again I don't want any E-bay stuff. Dranzer, No E-Bay, DONE

(Aug. 09, 2014  4:47 AM)DRANZER KING Wrote: Get knight dranzer from amazon for under $20. Or you could go through the trouble of YJA.
Just found out that Knight Dranzer is more for decoration than anything, but hey, I can make money for another dranzer Grin


Toku Taku Toys http://hobbyjapan.ocnk.net/,
owned and run by OkinawamTS, a user on the WBO.

May I suggest Dranzer S as a supremely wise first choice
http://hobbyjapan.ocnk.net/product/1301


His prices are in Japanese Yen, and his shipping is by weight. Accepted payments methods are paypal and bank transfer.

Shipping: http://hobbyjapan.ocnk.net/help

Countries that do not accept the Registerd SAL shipping method (ie, you'll need to choose a different and probably more expensive shipping method):
http://hobbyjapan.ocnk.net/news#2

Good luck with your purchase Smile


RE: [Plastics] :: Q&A Thread - Neo - Aug. 10, 2014

(Aug. 10, 2014  12:11 AM)BrioShield Wrote:
(Aug. 09, 2014  8:06 PM)Neo Wrote:
(Aug. 09, 2014  4:34 PM)BrioShield Wrote: He never even specified he was looking for a "Kai anime version Dranzer".
Dranzer King's point is a fair one. Whether Knight Dranzer "counts" or not is up to the person asking the question.
It just isn't a very good Beyblade. He could find a Dranzer S/F for under $20, which I'm sure is the kind he wants.



LISTEN:

He said he wanted a Dranzer beyblade.
Dranzer King suggested Knight Dranzer.

You didn't say "there are better Dranzers for the same price" or "It's not your best choice", you said
"Knight Dranzer doesn't count" and you really aren't in the position to say what counts or not.

(Aug. 09, 2014  8:20 AM)KirbyRobot Wrote: Guys I don't plan on buying things from forums, my family is always suspicious so sorry, and besides I only trust official websites with official people, who will actually send you an Item, and again I don't want any E-bay stuff. Dranzer, No E-Bay, DONE

(Aug. 09, 2014  4:47 AM)DRANZER KING Wrote: Get knight dranzer from amazon for under $20. Or you could go through the trouble of YJA.
Just found out that Knight Dranzer is more for decoration than anything, but hey, I can make money for another dranzer Grin


Toku Taku Toys http://hobbyjapan.ocnk.net/,
owned and run by OkinawamTS, a user on the WBO.

May I suggest Dranzer S as a supremely wise first choice
http://hobbyjapan.ocnk.net/product/1301


His prices are in Japanese Yen, and his shipping is by weight. Accepted payments methods are paypal and bank transfer.

Shipping: http://hobbyjapan.ocnk.net/help

Countries that do not accept the Registerd SAL shipping method (ie, you'll need to choose a different and probably more expensive shipping method):
http://hobbyjapan.ocnk.net/news#2

Good luck with your purchase Smile
Let's drop it.


RE: [Plastics] :: Q&A Thread - V2 - Aug. 10, 2014

Sounds good.


RE: [Plastics] :: Q&A Thread - Neo - Aug. 10, 2014

Is there a way to keep Auto Change Base in Sharp Mode?


RE: [Plastics] :: Q&A Thread - ashton pinto - Aug. 10, 2014

(Aug. 10, 2014  12:34 AM)BrioShield Wrote: Sounds good.

I had asked oki whether he accepts bank transfer , he said its only for japanese people ..
so, just paypal


RE: [Plastics] :: Q&A Thread - Neo - Aug. 10, 2014

I can't get the RC bey blade to work after I take it off?


RE: [Plastics] :: Q&A Thread - Poseidon - Aug. 10, 2014

Errrr, so if it definitely charged? Cause if it is a NIB, there's only a small chance that it's broken.


RE: [Plastics] :: Q&A Thread - Neo - Aug. 10, 2014

I'm not sure. Step by step anyone ?