World Beyblade Organization by Fighting Spirits Inc.
Wing Attacker Draft (Complete and Needs Approval) - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade Wiki (https://worldbeyblade.org/Forum-Beyblade-Wiki)
+--- Thread: Wing Attacker Draft (Complete and Needs Approval) (/Thread-Wing-Attacker-Draft-Complete-and-Needs-Approval)

Pages: 1 2 3


RE: Wing Attacker complete draft ready KEI look - Phoenix Inferno - Oct. 14, 2011

(Oct. 10, 2011  5:28 PM)Dan Wrote: Kei is actually the one deciding if an article is ready for Beywiki.. :V
I realize patience is a hard thing to master, but it is just an article.

Okay I will


RE: Wing Attacker Kei Look now please - Dan - Oct. 16, 2011

(Aug. 26, 2011  3:19 AM)Phoenix Inferno Wrote:
Wing Attacker




1.(AR) Wing Attack Ring. Number 30
2.(WD) Wide WD. Type: Attack
3.(BB) Semi Flat. System 4 layer
4.Gallery
5.Overall


Attack Ring (AR) Wing Attack Ring

8 grams

This AR has an oval shape with two wings on each side with no real prominent contact points. This AR has a gimmick in which two "wings" attached to the AR by metal coils retract outwards from the inside gaps in the AR while the beyblade is spinning. These wings are meant to push away opponents and absorb shock. When these wings are fully extended, the AR's gaps are left open and exposed, leaving the beyblade very vulnerable to attacks by the opposing beyblade. When these gaps are hit, this causes the beyblade to be easily knocked off balance making it easy for the opposing bey to score a sleep out or a stadium out. The Wing Attack Ring is known to have severe breakage issues related to the wings and gaps. Occasionally the wings will be put under too much stress and snap off the Attack Ring. Also coils can come loose making the wings non-retractible. When the gaps of the AR are constantly hit,the AR itself can snap and break apart. Considering its bad design and incapability to produce any Smash Attack due to the wheel having no effective contact points or being properly absorb shock, this AR should in no way be used competitively.



Weight Disk (WD): Wide
See Wide (WD).

Blade Base (BB): Semi-Flat
See Semi-Flat


Gallery


Overall this beyblade has no competive purpose and should only be bought for collection purpose only.




RE: Wing Attacker Kei Look now please - Phoenix Inferno - Oct. 16, 2011

Thank you for helping me I'll add it


RE: Wing Attacker Kei Look - Phoenix Inferno - Oct. 22, 2011

Can someone please post pictures of wing Attacker I Cant I really am to lazy.XD[/b] I IT Great don't erase


RE: Wing Attacker Kei Look - Phoenix Inferno - Oct. 29, 2011

Since thread has fallen out of notice, I will post. It may be warned or deleted, but spare this user. But on this but on another note, please lock this thread when or if this draft is posted on beywiki. Do not warn I know I'm a not knowing user delete this


RE: Wing Attacker Kei Look - Hazel - Oct. 30, 2011

Please remove the "Kei Look" nonsense and just put something more along the lines of "Needs Approval".

Kei is not going to give your thread more of an eye just because his name shows up in the title, and it's just attention-grabby.

You also need to realize that HWS and 4D Beyblades are the current priority of the Beywiki, and that if you really want your article noticed, you need only PM Kei, instead of bumping it constantly. I'm also not sure what you're talking about with "new user spam".


RE: Wing Attacker Needs Approval - Phoenix Inferno - Oct. 30, 2011

I did and some new users don't read the rule pm sent and sometimes end up banned.


RE: Wing Attacker Kei Look now please - Phoenix Inferno - Nov. 04, 2011




Wing Attacker




1.(AR) Wing Attack Ring. Number 30
2.(WD) Wide WD. Type: Attack
3.(BB) Semi Flat. System 4 layer
4.Gallery
5.Overall


Attack Ring (AR) Wing Attack Ring

8 grams

This AR has an oval shape with two blunt wings on each side with no real prominent contact points. This AR has a gimmick in which two "wings" attached to the AR by metal coils retract outwards from the inside gaps in the AR while the beyblade is at a high RPM. These wings are meant to push away opponents and absorb shock. When these wings are fully extended, the AR's gaps are left open and exposed, leaving the beyblade very vulnerable to attacks by the opposing beyblade. When these gaps are hit, this causes the beyblade to be easily knocked off balance making it easy for the opposing bey to score a sleep out or a stadium out. The Wing Attack Ring is known to have severe breakage issues related to the wings and gaps. Occasionally the wings will be put under too much stress and snap off the Attack Ring. Also coils can come loose making the wings non-retractible, but this is easily fixed by un screwing the screws holding the wing and fix the coil. When the gaps of the AR are constantly hit,the AR itself can snap and break apart. Considering its bad design and incapability to produce any Smash Attack due to the wheel having no effective contact points or being properly absorb shock, this AR should in no way be used competitively.



Weight Disk (WD): Wide
See Wide Weight Disks.


Blade Base (BB): Semi-Flat
See Semi Flat.


Gallery


Overall this beyblade has no competive purpose and should only be bought for collection purpose only.

[/quote]


[/quote]

I added the links and a few things also.


RE: Wing Attacker Needs Approval - Phoenix Inferno - Nov. 18, 2011

How is this draft. Criticize away!

(Nov. 18, 2011  10:19 PM)Phoenix Inferno Wrote: How is this draft. I would like to hear some critics.
(Nov. 04, 2011  9:44 PM)Phoenix Inferno Wrote:
Wing Attacker




1.(AR) Wing Attack Ring. Number 30
2.(WD) Wide WD. Type: Attack
3.(BB) Semi Flat. System 4 layer
4.Gallery
5.Overall


Attack Ring (AR) Wing Attack Ring

8 grams

This AR has an oval shape with two blunt wings on each side with no real prominent contact points. This AR has a gimmick in which two "wings" attached to the AR by metal coils retract outwards from the inside gaps in the AR while the beyblade is at a high RPM. These wings are meant to push away opponents and absorb shock. When these wings are fully extended, the AR's gaps are left open and exposed, leaving the beyblade very vulnerable to attacks by the opposing beyblade. When these gaps are hit, this causes the beyblade to be easily knocked off balance making it easy for the opposing bey to score a sleep out or a stadium out. The Wing Attack Ring is known to have severe breakage issues related to the wings and gaps. Occasionally the wings will be put under too much stress and snap off the Attack Ring. Also coils can come loose making the wings non-retractible, but this is easily fixed by un screwing the screws holding the wing and fix the coil. When the gaps of the AR are constantly hit,the AR itself can snap and break apart. Considering its bad design and incapability to produce any Smash Attack due to the wheel having no effective contact points or being properly absorb shock, this AR should in no way be used competitively.

Mold Variations

The Hasbro version of the AR has differences. The AR has the two notches on the end. Also, the AR has a filled in gap on the wings;this decreases breakage issues. These don't effect weight.

Weight Disk (WD): Wide
See Wide Weight Disks.


Blade Base (BB): Semi-Flat
See Semi Flat.


Gallery


Overall this beyblade has no competive purpose and should only be bought for collection purpose only.




I added the links and a few things also.



RE: Wing Attacker Draft (Complete and Needs Approval) - Phoenix Inferno - Nov. 19, 2011

Any more to fix or add to this awesome draft?


RE: Wing Attacker Draft (Complete and Needs Approval) - Imperial - Nov. 21, 2011

(Nov. 04, 2011  9:44 PM)Phoenix Inferno Wrote:
Wing Attacker




1.(AR) Wing Attack Ring. Number 30
2.(WD) Wide WD. Type: Attack
3.(BB) Semi Flat. System 4 layer
4.Gallery
5.Overall


Attack Ring (AR) Wing Attack Ring

8 grams

This AR has an oval shape with two blunt wings on each side with no real prominent contact points. This AR has a gimmick in which two "wings" attached to the AR by metal coils retract outward from the inside gaps in the AR while the beyblade is at a high RPM. These wings are meant to push away opponents and absorb shock. When these wings are fully extended, the AR's gaps are left open and exposed, leaving the beyblade very vulnerable to attacks by the opposing beyblade. When these gaps are hit, this causes the beyblade to be easily knocked off balance making it easy for the opposing bey to score a sleep out or a stadium out. The Wing Attack Ring is known to have severe breakage issues related to the wings and gaps. Occasionally the wings will be put under too much stress and snap off the Attack Ring. Also coils can come loose making the wings non-retractable, but this is easily fixed by unscrewing the screws holding the wing and fixing the coil. When the gaps of the AR are constantly hit, the AR itself can snap and break apart. Considering its bad design and incapability to produce any Smash Attack due to the wheel having no effective contact points or being unable to properly absorb shock, this AR should in no way be used competitively.

Mold Variations
The Hasbro version of the AR has differences. The AR has the two notches on the end. Also, the AR has a filled in gap on the wings;this decreases breakage issues. These don't effect weight.

Weight Disk (WD): Wide
See Wide Weight Disks.


Blade Base (BB): Semi-Flat
See Semi Flat.


Gallery


Overall this beyblade has no competitive purpose and should only be bought for collection purposes.

Some edits.


RE: Wing Attacker Draft (Complete and Needs Approval) - Phoenix Inferno - Nov. 30, 2011

Sorrr the late reply, thank you Imperial. I see no errors, so I'll post it on the OP. Okay might their be any more edits to it?


RE: Wing Attacker Draft (Complete and Needs Approval) - th!nk - Jul. 24, 2012

The writing of this still needs a little tidying up if anyone wants to do it. The AR needs a better conclusion at the end that covers more than just attack, and I'm not sure the gimmick's purpose is described adequately, but it's been a long time since I broke my old fake wing attacker, haha (I bought it as a kid jut for the fake spark draciel bitchip it had lol).
The overall needs more detail, too.

Other than that pretty decent.