+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade Products (https://worldbeyblade.org/Forum-Beyblade-Products)
+--- Thread: Product BB-99 Hell Kerbecs BD145DS (/Thread-Product-BB-99-Hell-Kerbecs-BD145DS)
RE: BB-99 Hell Kerbex BD145DS - Rf3K - Oct. 31, 2010
(Oct. 31, 2010 12:24 AM)OkiBlaze Wrote:(Oct. 30, 2010 11:55 PM)Royface3000 Wrote: The way the walls on the track extend upwards also worrys me.. From the picture it looks like it will at least be incompatible with low-reaching metal wheels like Leone and Rock, but I'm optimistic about how it will fit with Ray. I'm also hoping that the track will have some use in defense combos since it should be able to make a decent amount contact considering how high it reaches.
The thing is, if it's supposed to be a defense type track, it would be useless on Ray.
I meant it might be useful for defense when used with Hell. Sorry about my bad wording. I should have put that part of my post in a separate paragraph to avoid confusion.
RE: BB-99 Hell Kerbex BD145DS - Pimpju - Oct. 31, 2010
Looks to me like it will have a hell of a lot of recoil (Heh, pun). I doubt it will be viable as a defence wheel.
RE: BB-99 Hell Kerbex BD145DS - RエスコルピオT125JB - Oct. 31, 2010
[Image: ker5.jpg]
By looking at the circle, there is a wall to block the right-spin shooter, does this means Hell Kerbex is a left-spin bey?
RE: BB-99 Hell Kerbex BD145DS - pegasis105rf - Oct. 31, 2010
(Oct. 31, 2010 2:43 PM)RエスコルピオT125JB Wrote: [Image: ker5.jpg]thanks!
By looking at the circle, there is a wall to block the right-spin shooter, does this means Hell Kerbex is a left-spin bey?
RE: BB-99 Hell Kerbex BD145DS - Raijin - Oct. 31, 2010
I have an idea! - How about Crossfire Kerbex ? Heh? Heh?
(Oct. 31, 2010 6:58 AM)momiji manju Wrote: Looks to me like it will have a hell of a lot of recoil (Heh, pun). I doubt it will be viable as a defence wheel.
Then we can see if it'll do a hell better at attack, maybe?
RE: BB-99 Hell Kerbex BD145DS - Kai-V - Oct. 31, 2010
(Oct. 31, 2010 2:43 PM)RエスコルピオT125JB Wrote: By looking at the circle, there is a wall to block the right-spin shooter, does this means Hell Kerbex is a left-spin bey?I am not sure at all.
Firstly, looking at my Storm Wheel, either Hell is very, very large and disproportionate in the centre, or what you circled is not the actual 'wall' that prevents the insertion of some prongs.
Secondly, still looking at my Storm Wheel, the direction of that 'wall' would be blocking left-spin prongs, not right-spin ...
RE: BB-99 Hell Kerbex BD145DS - adventure time - Oct. 31, 2010
(Oct. 31, 2010 3:10 PM)Kai-V Wrote:(Oct. 31, 2010 2:43 PM)RエスコルピオT125JB Wrote: By looking at the circle, there is a wall to block the right-spin shooter, does this means Hell Kerbex is a left-spin bey?I am not sure at all.
Firstly, looking at my Storm Wheel, either Hell is very, very large and disproportionate in the centre, or what you circled is not the actual 'wall' that prevents the insertion of some prongs.
Secondly, still looking at my Storm Wheel, the direction of that 'wall' would be blocking left-spin prongs, not right-spin ...
I agree with Kai-V.
Though,while acknowledging this, and my storm wheels, im dissapointed if this is another right-spin.
RE: BB-99 Hell Kerbex BD145DS - Kai-V - Oct. 31, 2010
Still, if at least the parts can be good, I think we can forget the fact that it only spins right, hah.
RE: BB-99 Hell Kerbex BD145DS - OkiBlaze - Oct. 31, 2010
I went to check back the image with the combined wheels, and I saw that there's no wall to block right-spin prongs.
[attachment=3784]
RE: BB-99 Hell Kerbex BD145DS - NAP - Oct. 31, 2010
Is it possible that the above pics are of a prototype?
RE: BB-99 Hell Kerbex BD145DS - Kai-V - Oct. 31, 2010
It is possible, but seriously for them to publish it the parts have to be very similar to the actual pieces.
RE: BB-99 Hell Kerbex BD145DS - §ΣρΔΓΛτξΦζÞιΠΞ - Oct. 31, 2010
OkiBlaze
I found my info on a Korean blog site
RE: BB-99 Hell Kerbex BD145DS - Mc Frown - Nov. 01, 2010
(Oct. 31, 2010 6:11 AM)OkiBlaze Wrote:(Oct. 31, 2010 4:11 AM)Mc Frown Wrote: Well of course : \
Actually, I'm not too sure about this. The spikes on the track could prevent any wheels other than Hell from using it, sorta like LDrago's case.
I was responding to Seperated Spine's post, where he asked if you meant the Pre-HWS Leone Wheel, which was a resounding 'duh'.
RE: BB-99 Hell Kerbex BD145DS - Kei - Nov. 01, 2010
(Oct. 31, 2010 10:09 PM)OkiBlaze Wrote: I went to check back the image with the combined wheels, and I saw that there's no wall to block right-spin prongs.
Yeah, and also just looking at Hell's wings, you can tell that it would never be left-spin compatible. It would have way too much recoil.
RE: BB-99 Hell Kerbex BD145DS - OkiBlaze - Nov. 01, 2010
(Nov. 01, 2010 12:47 AM)Mc Frown Wrote:(Oct. 31, 2010 6:11 AM)OkiBlaze Wrote:(Oct. 31, 2010 4:11 AM)Mc Frown Wrote: Well of course : \
Actually, I'm not too sure about this. The spikes on the track could prevent any wheels other than Hell from using it, sorta like LDrago's case.
I was responding to Seperated Spine's post, where he asked if you meant the Pre-HWS Leone Wheel, which was a resounding 'duh'.
Ah, my mistake. Sorry.
RE: BB-99 Hell Kerbex BD145DS - bey-er - Nov. 02, 2010
The metal something likes Killer...
RE: BB-99 Hell Kerbex BD145DS - Crimson Hero - Nov. 03, 2010
It looks like this track has a bearing, and so does the tip
RE: BB-99 Hell Kerbex BD145DS - Ultra - Nov. 03, 2010
What? The track is obviously not a bearing track... and neither is the tip.
RE: BB-99 Hell Kerbex BD145DS - pegasis105rf - Nov. 04, 2010
(Nov. 03, 2010 10:39 PM)megablader2 Wrote: What? The track is obviously not a bearing track... and neither is the tip.yhea isnt the track to big to have a bearing?
RE: Hell Kerbex. - Jaems1 - Nov. 04, 2010
(Oct. 26, 2010 2:52 AM)Separated Spine Wrote: BB-99 Hell Kerbex will be released as a starter set on Christmas
i know, i know, i'm slow..
but if what he says is true then that means that Hell Kerbex will appear in the anime by Christmas. i noticed with G.Perseus, M.LDrago and R.Gill (as well as many other blades) that they usually release it in store on the same day as the beys come out in the anime or a few days earlier.
RE: BB-99 Hell Kerbex BD145DS - Mc Frown - Nov. 04, 2010
(Nov. 04, 2010 12:34 AM)pegasis105rf Wrote:(Nov. 03, 2010 10:39 PM)megablader2 Wrote: What? The track is obviously not a bearing track... and neither is the tip.yhea isnt the track to big to have a bearing?
How could it be 'too big' for a bearing?
RE: Hell Kerbex. - Kai-V - Nov. 04, 2010
(Nov. 04, 2010 1:23 AM)Jaems Wrote: i know, i know, i'm slow..Actually, it can also be several weeks before, or a few days after, but yes, it should appear around that period ... Damian Hart owns it, and after Brazil Gan Gan Galaxy is most likely going to face America, so it is not surprising at all. I would say it was predictable.
but if what he says is true then that means that Hell Kerbex will appear in the anime by Christmas. i noticed with G.Perseus, M.LDrago and R.Gill (as well as many other blades) that they usually release it in store on the same day as the beys come out in the anime or a few days earlier.
RE: BB-99 Hell Kerbex BD145DS - |Joe| - Nov. 04, 2010
It looks to me like Kerbex is attached to Hell with chains, so looks like no special Clear Wheel/Metal Wheel gimmicks.
RE: BB-99 Hell Kerbex BD145DS - Kai-V - Nov. 04, 2010
(Nov. 04, 2010 1:43 AM)Vanthorsan Wrote: It looks to me like Kerbex is attached to Hell with chains, so looks like no special Clear Wheel/Metal Wheel gimmicks.That is part of the Clear Wheel ... I am quite sure Hell and Kerbex are compatible with other Wheels.
RE: BB-99 Hell Kerbex BD145DS - |Joe| - Nov. 04, 2010
Ah I see now, its just the angle of the picture.......I'm gonna go facepalm myself now
