World Beyblade Organization by Fighting Spirits Inc.
Beyblade parts you want to see come true! - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade General (https://worldbeyblade.org/Forum-Beyblade-General)
+--- Thread: Beyblade parts you want to see come true! (/Thread-Beyblade-parts-you-want-to-see-come-true)



RE: Beyblade parts you want to see come true! - kbuno50 - Jan. 06, 2012

A special clear wheel, which is made out of METAL, not plastic to add weight to your bey.


RE: Beyblade parts you want to see come true! - -Vulcan- - Jan. 07, 2012

I know I already asked for this, but I still want a metal D-series bottom. Seriously.
Other crazy ideas:
- A 4D wheel that utilizes C145's gimmick. Maybe 4-6 "claws" attached to the perimeter of the PC frame?
- A compact metal wheel might be interesting. Like about the same width as a clear wheel.
- A jumping 4D bottom. Basically a MFB version of Spring Core. If the tip had the same shape as a D bottom, it *might* be effective. It would just stay in the center of the stadium and would constantly hit opponents.
- A different version of F:D that starts off in RHF mode and then switches to S (ideally they would make the tip more of a D or B shape). I guess you could call it F:S 2.


RE: Beyblade parts you want to see come true! - Megalishes - Jan. 07, 2012

I want there to be a beyblade made of pure metal except for the tip , partly plastic


RE: Beyblade parts you want to see come true! - kbuno50 - Jan. 07, 2012

A metal wheel, named "stone", which is like a 4D version of rock.




RE: Beyblade parts you want to see come true! - dragoonevo - Jan. 07, 2012

rfuv (rubber flat ultimate version), there is an illgal modfication which you can make to make this take out the tip from rubber flat, and insert the rubber from a mechanical pencil, into the casing for rf, and there you have it illgal rfuv.


RE: Beyblade parts you want to see come true! - T. L-Drago 9207 - Jan. 07, 2012

A part based on an illegal customization? That's crazy!


RE: Beyblade parts you want to see come true! - dragoonevo - Jan. 07, 2012

(Jan. 07, 2012  2:28 AM)-Vulcan- Wrote: I know I already asked for this, but I still want a metal D-series bottom. Seriously.
Other crazy ideas:
- A 4D wheel that utilizes C145's gimmick. Maybe 4-6 "claws" attached to the perimeter of the PC frame?
- A compact metal wheel might be interesting. Like about the same width as a clear wheel.
- A jumping 4D bottom. Basically a MFB version of Spring Core. If the tip had the same shape as a D bottom, it *might* be effective. It would just stay in the center of the stadium and would constantly hit opponents.
- A different version of FGrin that starts off in RHF mode and then switches to S (ideally they would make the tip more of a D or B shape). I guess you could call it FConfused 2.

i agree takara tomy should make final drive in reverse, where it starts of as rhf, and ends up as d, or ball.




RE: Beyblade parts you want to see come true! - $greenbucks$ - Jan. 07, 2012

RWD- Rubber Wide Defense


RE: Beyblade parts you want to see come true! - dragoonevo - Jan. 07, 2012

a very compact mfb beyblade, focusing all of its wight in the middle, to create high stamina.


RE: Beyblade parts you want to see come true! - UGottaCetus - Jan. 10, 2012

I think it would beneat to make a stadium with fans inside of it to help stamina types, give more use to the air pushing tracks like T125 and W105, and make the battle really "windy"Tongue_out.


RE: Beyblade parts you want to see come true! - Hazel - Jan. 10, 2012

(Jan. 10, 2012  9:02 PM)UGottaCetus Wrote: I think it would beneat to make a stadium with fans inside of it to help stamina types, give more use to the air pushing tracks like T125 and W105, and make the battle really "windy"Tongue_out.

...if there were vents in the Stadium floor, it would make the battle impossible. Fans from the sides wouldn't help those tracks. Fans from above you could easily macguyver and make for yourself.


RE: Beyblade parts you want to see come true! - UGottaCetus - Jan. 10, 2012

I was talking about an air hockey type thing with tiny little holes and a fan underneath, but yeah I could get some fans and put them on above the stadium.


RE: Beyblade parts you want to see come true! - Hazel - Jan. 10, 2012

Any holes at all would completely obliterate the enjoyability of the Stadium, really.


RE: Beyblade parts you want to see come true! - Arupaeo - Jan. 10, 2012

Only for sharp-ish tips - which of course is most of the non-attack tips in use today. Say, I bet that M145Q would do really well on an air-hockey stadium... :p


RE: Beyblade parts you want to see come true! - Hazel - Jan. 10, 2012

(Jan. 10, 2012  10:19 PM)Arupaeo Wrote: Only for sharp-ish tips - which of course is most of the non-attack tips in use today. Say, I bet that M145Q would do really well on an air-hockey stadium... :p

I'm pretty sure the right set of circumstances could propel even flat tips(and probably to hilarious results, R2F) into an airborne state from a small bump in the road, though.


RE: Beyblade parts you want to see come true! - Karl - Jan. 12, 2012

heres one that would be a killer smash attack:
it would have a lot of recoil though Uncertain:. i call it, demolish!


RE: Beyblade parts you want to see come true! - Janstarblast - Jan. 12, 2012

I would have liked it more should it have spun in the opposite direction, tbh.
The recoil would be MAJOR. The bey would simply stop dead upon contact with the opposing bey.
Not to mention that this does not seem to satisfy aerodynamics, and may end up having a rather low spin time in comparison to others...


RE: Beyblade parts you want to see come true! - Hazel - Jan. 12, 2012

That MW looks suspiciously similar to Omega's contact points...


RE: Beyblade parts you want to see come true! - xSora10 - Jan. 12, 2012

Which leads me to hope that Omega does not actually have the problems that Janstar posted.

Anyway, I'm just hoping to find a really good attack tip, that is better than RF. I doubt it, but if they find a better aerodynamic or aesthetic design for a rubber attack tip, that attacks even BETTER than RF, that would be awesome.


RE: Beyblade parts you want to see come true! - Hazel - Jan. 12, 2012

I'm pretty sure it doesn't need to get any better than RF and R2F...


RE: Beyblade parts you want to see come true! - xSora10 - Jan. 12, 2012

Maybe not, but if it could. I can't think of any improvements, personally, except maybe the fact that the rubber won't wear down, and the rubber shape would already be like a worn down RF.


RE: Beyblade parts you want to see come true! - Janstarblast - Jan. 13, 2012

Nah, that's probably not possible.
To prevent it from wearing, TT will have to use extremely hard rubber.
The rubber would be SO hard, that it won't grip the stadium floor like RF does... Remember Fantom Grip from plastics?
So, it would be an epic fail when it comes to aggressive movement patterns, recoil reduction, etc.
Not to mention that it will wear down anyway... Everything wears down... Plastic/Metal/Rubber tips; all wear down over time. So, let it be as it is now. Just to make a rubber tip last longer, you'd end up devastating its usefulness.


RE: Beyblade parts you want to see come true! - bulbasup - Jan. 13, 2012

i know many people hav already said this but... the revival of DRAGOON!!!, so pasically dragoon ms, the plastic part of the AR=clear wheel. metal part should be made bigger= MF metal wheel. track and tip= 90 RF Smile....maybe i'll draw it


RE: Beyblade parts you want to see come true! - Janstarblast - Jan. 13, 2012

Dragoon MS' AR wasn't the best, you know.
But well, it might be a good move to get some Dragoon fans to buy beys.
And of course, it won't hurt to get an RF with that. Wink


RE: Beyblade parts you want to see come true! - bulbasup - Jan. 13, 2012

yes thankyou.... then maybe a metal remake of dragoon g's ar? but dragoon was know for having 4... points? i dont know, is protrusions the right word.. help!