World Beyblade Organization by Fighting Spirits Inc.
Beyblade parts you want to see come true! - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade General (https://worldbeyblade.org/Forum-Beyblade-General)
+--- Thread: Beyblade parts you want to see come true! (/Thread-Beyblade-parts-you-want-to-see-come-true)



RE: Beyblade parts you want to see come true! - momdukes100 - Aug. 27, 2011

i was looking on bey wiki or something and it had this bey call stone monkey and the fusion wheel was a stone.i wish they really mad that bey


RE: Beyblade parts you want to see come true! - T. L-Drago 9207 - Aug. 28, 2011

FRF Firm Rubber Flat (made of the same rubber as that of R145)
FRS Firm Rubber Sharp (would be made in the same mold as RS, but with the same kind of rubber as R145)


RE: Beyblade parts you want to see come true! - AwesomeDragoon - Aug. 28, 2011

this might have been said already but

J145
(Jump)
it would work kinda like Einstien MS's RC or the Hasbro Jumping Base except it would have some sorta mechinism that lets it keep bouncing
that would (imo) be the most fun track ever (but it would COMPLETELY SUCK against pretty much any opposing bey.) but it would still be fun in an ENCLOSED STADIUM cause it would be out of control


RE: Beyblade parts you want to see come true! - LeonTempest - Aug. 28, 2011

Magnacore FaceBolt, along with a new magnacore stadium, and Hasbro's R2F un-nerfed Tired

Plastic and HMS beys reborn through MFB in some way


RE: Beyblade parts you want to see come true! - Dracomageat - Aug. 28, 2011

(Aug. 28, 2011  3:22 AM)DRAGOONMS9894 Wrote: this might have been said already but
J145

I suggested J140 (becomes 160 after jumping) as a one shot jumper before on the grounds that it would have a good chance at off balancing 230 track beys without being too tall itself. I'm not sure if the repeat jump mechanism is possible.

(Aug. 28, 2011  3:50 PM)LeonTempestXIII Wrote: Magnacore FaceBolt, along with a new magnacore stadium

I don't see what's wrong with the old stadium but magnecore is a popular suggestion and I already suggested neodymium MFs as a way to do it.

(Aug. 28, 2011  3:50 PM)LeonTempestXIII Wrote: Plastic and HMS beys reborn through MFB in some way

This has its own topic.


RE: Beyblade parts you want to see come true! - LeonTempest - Aug. 28, 2011

Of course it has its own topic, I am the one that made that topic. =/

Neodymium would be a good choice for a magnet face bolt. I am actualy suprised TT hasn't done so yet.

Here is an idea; A beyblade made from Orihalcon!




RE: Beyblade parts you want to see come true! - Dracomageat - Aug. 28, 2011

Orihalcon?


RE: Beyblade parts you want to see come true! - AwesomeDragoon - Aug. 28, 2011

(Aug. 28, 2011  5:25 PM)Dracomageat Wrote:
(Aug. 28, 2011  3:22 AM)DRAGOONMS9894 Wrote: this might have been said already but
J145

I suggested J140 (becomes 160 after jumping) as a one shot jumper before on the grounds that it would have a good chance at off balancing 230 track beys without being too tall itself. I'm not sure if the repeat jump mechanism is possible.

the way i understood u it sounds like u explained it like the trygle or C. dragoon tip part

also i didnt think the repeat jump thing would be possiblle i just thought it was a fun idea Tongue_out





RE: Beyblade parts you want to see come true! - LeonTempest - Aug. 28, 2011

Wikipedia isn't my favorite source of all time, but this wil give you a pretty good understanding of what it is.

http://en.wikipedia.org/wiki/Orichalcum

To sum it up, it is a legendary metal that has never been truely discovered. Some think it may have just been metals that we know of today, like gold, while others believe it to be something else entirly, something humanity has yet to rediscover. Orichalcum has many different ways of being spelled and pronounced, like "Oricalcon", "Orichalcon", "Orichalcum", and "Oricalcum".

Orichalcum has been mentioned and signifigant in many forms of media. Anime's like "Black Cat" and "Slayers" both have the metal involved with the shows, and games like "Maplestory" do as well.

To get this back on topic, one part that I would absolutely love to see other than what I named above would be the release of all the previous Etrenal parts, but with bearings, since it seems bearings are making a huge comeback with MFB.


RE: Beyblade parts you want to see come true! - Dracomageat - Aug. 28, 2011

(Aug. 28, 2011  7:58 PM)LeonTempestXIII Wrote: Orichalcum

That was all you needed to say.


RE: Beyblade parts you want to see come true! - Twisted Tempo - Aug. 28, 2011

cool


RE: Beyblade parts you want to see come true! - Dracomageat - Aug. 28, 2011

(Aug. 28, 2011  7:51 PM)DRAGOONMS9894 Wrote: the way i understood u it sounds like u explained it like the trygle or C. dragoon tip part

My J140 would be similar in shape to M145 and would have an internal spring mechanism triggered by a strong hit (including forceful launches and wall collisions). The track would then part in the middle and the now released spring would be shielded by a bit of plastic that would also act as the locking mechanism. This would, of course, alter the height (approx 140-160).


RE: Beyblade parts you want to see come true! - LeonTempest - Aug. 28, 2011

You asked, and I answered. What was wrong with my response, other than we both should have pm'd eachother instead of posting this conversation here?

In a desperate attempt to keep this thread on topic now, I would love to see more HF/S variants, such as HF/B, or HF/D, or even HF/F. And then different material version of that, like metal or the inner tip (not the HF mode) would be made of rubber, similarily to CS in a way.

I would also be curuous to see how HFConfused preforms when compared to HF/S
twisted Tempo:

...you should probobly say more than that...what is cool and why? And you should really name parts you want to see in MFB on this thread like what we are all doing, otherwise do not post in this thread.


RE: Beyblade parts you want to see come true! - Dracomageat - Aug. 28, 2011

(Aug. 28, 2011  8:21 PM)LeonTempestXIII Wrote: You asked, and I answered. What was wrong with my response, other than we both should have pm'd eachother instead of posting this conversation here?

If you're talking to me, I was simply stating that I only needed to see the conventional spelling to understand what you meant.

(Aug. 28, 2011  8:21 PM)LeonTempestXIII Wrote: In a desperate attempt to keep this thread on topic now, I would love to see more HF/S variants, such as HF/B, or HF/D, or even HF/F. And then different material version of that, like metal or the inner tip (not the HF mode) would be made of rubber, similarily to CS in a way.

I suggested HF/MS in the old beyblade remake topic for my dranzer but I didn't think of HF/RS, that would be weird. B and D would be too wide to fit through HF like that.

(Aug. 28, 2011  8:21 PM)LeonTempestXIII Wrote: I would also be curuous to see how HFConfused preforms when compared to HF/S

Dranzer V2 has S:HF while Dranzer S has HF/MS. Comparing them may yield an answer to that question.


RE: Beyblade parts you want to see come true! - LeonTempest - Aug. 28, 2011

*Remembers his Dranzer S and V2...

How could I have forgotten about that? Well, in all due honesty, change tips such as those have improved with MFB. The entire 4D series isn't as bad as I anticipated it would be from what I have heard.

Dranzer F had the worst change BB of all time...in mid battle it always get's stuck in between 2 of the modes, followed by the bey losing stamina rapidly, without much movement at all. =(



RE: Beyblade parts you want to see come true! - Dracomageat - Aug. 28, 2011

My Dranzer F rarely did that but I will admit that it was really very annoying when it did happen.


RE: Beyblade parts you want to see come true! - LeonTempest - Aug. 28, 2011

I think over the course of my life I have had close to 4 Dranzer F's...they all did that. The one I still have no still does that...Maybe it was just hasbro's version, or maybe I did it wrong?

I did get lucky soemtimes and the bey worked perfectly, as long as it wasn't be smashed into stadium walls by Dragoon F, then it was game over...

HF/RS or HF/CS would be really good to have.... to get really creative, one could have a plastic HF and a metal HF that looks likes an HF/S without the S. Ten, a series of plastic, metal and rubber tips could be placed inside of it, creating insane new combos.


RE: Beyblade parts you want to see come true! - Dracomageat - Aug. 28, 2011

HF/CS doesn't sound particularly plausible due to CS' width. I'd suggest RHF/S instead so it acts like CS when in S mode.


RE: Beyblade parts you want to see come true! - LeonTempest - Aug. 28, 2011

Rubber on the outside (HF) would not work, the tip would need to be more durable for the manual mode change required. Frankly, just a normal RHF sounds pointless...


RE: Beyblade parts you want to see come true! - T. L-Drago 9207 - Aug. 29, 2011

I...have devised two spin tracks using parts from WA130 and ED145.

WA145 and ED130!


RE: Beyblade parts you want to see come true! - BoltBlader007 - Aug. 29, 2011

i'd like to see a poison like fusion wheel but with little pieces of rubber on it


RE: Beyblade parts you want to see come true! - AllGenBlader - Aug. 29, 2011

RHF Rubber Hole Flate
series were most attack weals are remade the same exept for its made so there a lot of recoil


RE: Beyblade parts you want to see come true! - T. L-Drago 9207 - Aug. 29, 2011

(Aug. 29, 2011  12:20 AM)BoltBlader007 Wrote: i'd like to see a poison like fusion wheel but with little pieces of rubber on it

think it should be named Venom?

also, DW105, and it'd be essentially a W105 with extra wings!


RE: Beyblade parts you want to see come true! - TenshouTsubasa - Aug. 29, 2011

Trypio's wheel in MFB version.


RE: Beyblade parts you want to see come true! - TwiztidBlader - Aug. 29, 2011

I'd like to see uhhhhhh maybe an ECS Eternal Coat Sharp or CSD Coat Semi-Defense