World Beyblade Organization by Fighting Spirits Inc.
Beyblade parts you want to see come true! - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade General (https://worldbeyblade.org/Forum-Beyblade-General)
+--- Thread: Beyblade parts you want to see come true! (/Thread-Beyblade-parts-you-want-to-see-come-true)



RE: Beyblade parts you want to see come true! - DragoonTalon - May. 07, 2011

I actually have beyblades. Talon Dragoon LMLW85LRF, Talon is a MFB version of Dragon MS, LMLW is a metal large left wing, and LRF is, well, LRF. As well as Strata Gaia Dragoon EConfused, Strata is like Gaia Dragoon MS, and EConfused is earth shaker, which is a RF with insides that make the bottom shake the stadium.


RE: Beyblade parts you want to see come true! - sasuke41915 - May. 07, 2011

A rubber ball would be nice for defense


RE: Beyblade parts you want to see come true! - Annoying-Fork - May. 07, 2011

Mortal Kombat themed Wheel's. I am serious here.

Example: Shuriken Saibot ED125MF


RE: Beyblade parts you want to see come true! - DragoonTalon - May. 07, 2011

I have another beyblade. Hadoken Ryu MLB85SRF. Hadoken is a series of balls attached to a hand punching. MLB is Metal large Ball, which is 3 free spinning large metal balls. SRF,-which is Soft Rubber Flat- is an R2F, but with much softer rubber.


RE: Beyblade parts you want to see come true! - Raijin - May. 07, 2011

I was thinking MFS - Metal Flat Sharp. Similar to Metal Change Core from Dark Effigy. That Core was pretty awesome.


RE: Beyblade parts you want to see come true! - faissaloo - May. 07, 2011

I would really like a mfb version of engine gear.


RE: Beyblade parts you want to see come true! - Lexos - May. 07, 2011

I would like another 'Rubber' piece, much like meteo l drago.
A good zombie metal wheel or clear wheel.
The plastics seem to contain much more zombie style structure capabilities....


RE: Beyblade parts you want to see come true! - Cyber Blader - May. 07, 2011

I want to see a beyblade that changes directions mid battle, like Dranzer GT.


RE: Beyblade parts you want to see come true! - DragoonTalon - May. 07, 2011

I could see the Gravity Perseus evo doing that if it's released cyber.


RE: Beyblade parts you want to see come true! - ƛnubis - May. 08, 2011

Full rubber beyblades would be cool.


RE: Beyblade parts you want to see come true! - mikado282745 - May. 08, 2011

one part id like to see is something like ED145 but with wings made of metal and with a bearing so it can spin easier


RE: Beyblade parts you want to see come true! - GaleForce - May. 08, 2011

@scipio132 That would be weird ^^ But useless.


RE: Beyblade parts you want to see come true! - Sniper - May. 08, 2011

i would like to see a wider rubber defence or a eternal version of a attack performance tip like HF,RF,R2F etc


RE: Beyblade parts you want to see come true! - BeyFan - May. 08, 2011

Would like a WHF. Just having a wider version would lead to less warping. I know, it is a outclassed part.


RE: Beyblade parts you want to see come true! - Gen SimpL - May. 08, 2011

i have many parts that i want to see
i have already said 4 which are
XRF(Xtreme Rubber Flat)
RB(Rubber Ball)
MD (Metal Defence)
WFS(Wide Flat Sharp)

some other parts i would like
RD(rubber defense) it would be cool, but it would turn into an attack type as soon as its knocked on its side
C: curve, its like the same shape as flat, but its like a ball at the end, but just a ball, not like FS with a flat and sharp, just the hemispherical ball
Severe: a metal wheel like basalt, WITHOUT THE STAIRCASE, but weighs less, not lesser than earth though
Quetzacoatel: highly unlikly, but i would just want it
CC/CB: Coat Curve/Ball : just cuz it would be awsome
SJD: spring jump defence: LIKE A HOPPER ATTACKER TIP but the springs inside
BS/C: Bearing sharp/core (nto sure what to call it) BEARING FOR THE WIN
RBS/C : rubber bearing sharp/core(lolz)
EG/RF: engine gear rubber flat, can charge for 3 tabs ( or combos, like 2 burst , then 1 burst power) just for kicks
A: Arc, basiclly a ball, with a sharp in it ( NOT A BALL SHARP)
YEAH thats it lolz


RE: Beyblade parts you want to see come true! - Uwik - May. 08, 2011

XMF.. Xtreme Metal Flat would be quite fun to play around with. For tracks, BD-230 (with the boost disk really thick, at least 1 cm), now that would be something.


RE: Beyblade parts you want to see come true! - Katanazero - May. 08, 2011

Metal wheel: Killer wheel with 7 wings GrinDDD
And heavier with a bit of angle on the wings too.
Clear wheel: Aegis wheel that comes out in 'MFB Cyber Pegasis' game,
track: UW that folds and comes out during spin, also a low track with a bearing, so that you can use it on MLD
bottom:
a sharp that looks like a screw's tip.
a bearing WD so you can use iwth MLD GrinDDDDD
MAXIMUM DRAAAAAIN~
Meteo L drago B105BWD

I'll draw a picture to show you B105 Smile if you want lol


RE: Beyblade parts you want to see come true! - Xlr8 - May. 08, 2011

(May. 07, 2011  8:19 PM)Raijin Wrote: I was thinking MFS - Metal Flat Sharp. Similar to Metal Change Core from Dark Effigy. That Core was pretty awesome.

rajin i have created this tip but can't use it in tourneys if u want to know how to make it just pm me


RE: Beyblade parts you want to see come true! - Sniper - May. 08, 2011

(May. 08, 2011  10:27 AM)darkblader12 Wrote: i have many parts that i want to see
i have already said 4 which are
XRF(Xtreme Rubber Flat)
RB(Rubber Ball)
MD (Metal Defence)
WFS(Wide Flat Sharp)

some other parts i would like
RD(rubber defense) it would be cool, but it would turn into an attack type as soon as its knocked on its side
C: curve, its like the same shape as flat, but its like a ball at the end, but just a ball, not like FS with a flat and sharp, just the hemispherical ball
Severe: a metal wheel like basalt, WITHOUT THE STAIRCASE, but weighs less, not lesser than earth though
Quetzacoatel: highly unlikly, but i would just want it
CC/CB: Coat Curve/Ball : just cuz it would be awsome
SJD: spring jump defence: LIKE A HOPPER ATTACKER TIP but the springs inside
BS/C: Bearing sharp/core (nto sure what to call it) BEARING FOR THE WIN
RBS/C : rubber bearing sharp/core(lolz)
EG/RF: engine gear rubber flat, can charge for 3 tabs ( or combos, like 2 burst , then 1 burst power) just for kicks
A: Arc, basiclly a ball, with a sharp in it ( NOT A BALL SHARP)
YEAH thats it lolz

(Quetzacoatel: highly unlikly, but i would just want it) this is already a beyblade >_<


RE: Beyblade parts you want to see come true! - stevebak - May. 09, 2011

OK let me try:
1. THBD195/230/255GB or for short THBD195GB (triple height boost disk -----gravity ball
2. MRB metal rubberball
3. F:Q final quacke for capricorne starts as a F ends with Q
4. 230R a 230 track with rubber based layer for defense.


RE: Beyblade parts you want to see come true! - DragoonTalon - May. 09, 2011

Wait, wait, I have one... MBD230


RE: Beyblade parts you want to see come true! - Lexos - May. 09, 2011

Witch metal with Metal coating at the top and extreme smash capabilities.
Hunter energy ring?
Track - RD145 (like ed145 but with rubber that spins left)
bottom- tall metal sharp


RE: Beyblade parts you want to see come true! - DragoonTalon - May. 09, 2011

Heavy Basalt ___ MBD230SRS


RE: Beyblade parts you want to see come true! - njrk97 - May. 09, 2011

i would like to see mor beyblads with the hole over lapping metal wheel and energy ring why is lrdrago and peruis th only ones


RE: Beyblade parts you want to see come true! - Grand_Ketos - May. 09, 2011

id like to see a beyblade that has a timed engine that when set off jets out extra atk rings possibly pushing the opposing blade off its balance.

How bout a stadium with a spinning center??? O.o