World Beyblade Organization by Fighting Spirits Inc.
Beyblade parts you want to see come true! - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade General (https://worldbeyblade.org/Forum-Beyblade-General)
+--- Thread: Beyblade parts you want to see come true! (/Thread-Beyblade-parts-you-want-to-see-come-true)



RE: Beyblade parts you want to see come true! - Annoying-Fork - Feb. 01, 2011

Since Season 3 is introducing a new base system, we could also see actual successors to metal wheels themselves.


RE: Beyblade parts you want to see come true! - Black Ghost - Feb. 01, 2011

M145 Track (I ment Metal 145, the shape of R145 exept the rubber is metal)


RE: Beyblade parts you want to see come true! - dracofrancis - Feb. 01, 2011

(Jan. 31, 2011  9:32 PM)wolborgMS Wrote: a rubber ball would be execllent .rubber wide bal would have to be lauched at sixty to avoid being hit making B being better
i agree
but i want to see dranzer g on mfb (killer gemios does not count)
but with like engine gear
it could be like
dranzer (face) gigs(metal wheel) dranzer (clear wheel)beg2crf(base engine gear 2nd clutch rubber flat)(track and tip fused)
dranzer (face) would be dranzer (phoenix) like the bit beast/chip
gigs would look like killer metal wheel
dranzer would look like the dranzer g AR
and beg2crf would look like dranzer's base with dranzer's engine gear + storm peg's rubber flat
this will be an attack type with stamina capabilities (attack type + engine gear)
although everyone hates engine gear


RE: Beyblade parts you want to see come true! - Gibraltor - Feb. 01, 2011

(Feb. 01, 2011  12:31 AM)AggregateS36 Wrote: Since Season 3 is introducing a new base system, we could also see actual successors to metal wheels themselves.

Ugggg I seriously hope they don't go back to plastic >.>
Not sure what new innovations can be done to the wheels, they already seperated the plastic from the metal. Perhaps you want them to make it completely metal?


RE: Beyblade parts you want to see come true! - NitroNeo - Feb. 01, 2011

Hm... sorry if someone has posted this earlier , but a RF/R2F [ any rubber tip ] thats never warns off & a Solid metal tip lip SD , but which will give even R2F & MF a difficult time in KO'ing it


RE: Beyblade parts you want to see come true! - Starbreaker LTK - Feb. 01, 2011

I would like to see somthing like BD145 but instead of a circular spin track the edges could be in a floral pattern cos it would look pretty good and it might take smashes well, like BD145.


RE: Beyblade parts you want to see come true! - Trolol - Feb. 01, 2011

Extreme Rubber Flat. Smile


RE: Beyblade parts you want to see come true! - TenshouTsubasa - Feb. 01, 2011

Right-Metal Flat .
I sure it will create a mayhem.


RE: Beyblade parts you want to see come true! - TheLoneWolf.Kai - Feb. 01, 2011

A compact and heavy circular metal wheel(like Jiraiya MS' Jiraiya Blade) tapering towards the end. I mean.... its side view while spinning should be something like this : < >; Hope you get the idea. That will apply immense pressure(like a knife or a blade) while at the same time it will have no contact points to steal spin from. Its small weight will assist it in having a high spin velocity, another necessary advantage in a beybattle. Because of its weight, it will have a good amount of defense while at the same time it will retain its attack capabilities. Using such a wheel with bottoms/performance tips such as RF or R2F will make a heavy attack type blade. Of course, the trade off will be decrease in movement speed but it can be countered by the combination of heavy weight and high spin velocity(compact wheel). A downside to the compact size would be decreased attack range. However, the heavy weight of the beyblade will allow it to move to the centre of the beystadium quickly instead of wasting energy spinning at the edge of the beystadium(but this can be countered by a sliding shoot). Since most defence and stamina(even balance occasionally) type beyblades tend to sit in the centre of the beystadium, the heavy weight will be an advantage. An attack type beyblade does not need to have high velocity but high momentum. This momentum can also be acquired by a high mass instead of high velocity. The high spin velocity can also help in attacking more effectively.
Personally I think this would be a nice part. However, advice and opinion of elders and betters is always welcome(especially Bey Brad's); as are the ideas of all other beybladers, both amateurs and veterans.


RE: Beyblade parts you want to see come true! - Gibraltor - Feb. 01, 2011

(Feb. 01, 2011  9:56 AM)Meteo LDrago Wrote: Right-Metal Flat .
I sure it will create a mayhem.

Right? You mean like the metal flat already on Screw Capricorne?


RE: Beyblade parts you want to see come true! - Gamer420 - Feb. 01, 2011

No, R2F is Right Rubber Flat if it didn't have that galaxy shaped thing it would just be RF basically it's a Metal Flat in the shape of that galaxy thing, I think anyway.

I'd like to see a Rubber Wide Ball, as I don't like the shape of RS at all, too thin for my liking, so I'd be happy to see that.


RE: Beyblade parts you want to see come true! - Black Ghost - Feb. 02, 2011

Forgot to say Everyone Clear Wheel so i can make Screw Everyone then people would laugh when i say the bey's name, my class would burst out with laughter.


RE: Beyblade parts you want to see come true! - Gibraltor - Feb. 02, 2011

(Feb. 01, 2011  9:32 PM)BFireblaze 6509 Wrote: No, R2F is Right Rubber Flat if it didn't have that galaxy shaped thing it would just be RF basically it's a Metal Flat in the shape of that galaxy thing, I think anyway.

So basically an XMF would accomplish your same goal?


RE: Beyblade parts you want to see come true! - X1 - Feb. 02, 2011

Fusion Wheel - Ultimate
Spin Track - CH85
Performance Tip - Right Metal Flat


RE: Beyblade parts you want to see come true! - ldragolightning - Feb. 02, 2011

EDS: Eternal Different Flat: A bearing tip which is rubber flat, but polished flat in the bearing shaft.
PF: Polished Flat: A very bad tip which is a wide flat tip made out of PD plastic.
PMB: Polished Metal Ball: A metal ball-size tip made out of MS metal and varnished, and comes with "tip varnish" (no, seriously). If done correctly, this should make a stamina tip with hardly any problems regaining balance.
D230: Defense 230!: I see that not even 85 attackers could ever get in contact with D125, but with D230, it would just be an ultimate track! (not competitive, though)
More Right/Left spinning beys! I do not agree that there should only be 1.


RE: Beyblade parts you want to see come true! - Raijin - Feb. 03, 2011

Engine gear style Track fuse Tip things for the new system!


RE: Beyblade parts you want to see come true! - Annoying-Fork - Feb. 03, 2011

^^^I can't wait till we get more news about the track/tip thing so we could stop the engine gear speculation^^^

I would want a Metal Hole Flat. Sorry if someone already said this.


RE: Beyblade parts you want to see come true! - Gibraltor - Feb. 03, 2011

(Feb. 03, 2011  6:59 PM)Raijin Wrote: Engine gear style Track fuse Tip things for the new system!

That ype of speculation is why ♥ isn't stickying this thread lol.

Metal hole flat would be interesting.


RE: Beyblade parts you want to see come true! - lord Wolfblade - Feb. 03, 2011

HRF (hole rubber flat), a 150-160 track, MC145 (metal claws 145), and MCH145 (MC Hammer 145, like MC145 but the claws are little hammers)


RE: Beyblade parts you want to see come true! - Annoying-Fork - Feb. 03, 2011

(Feb. 03, 2011  9:52 PM)lord Wolfblade Wrote: HRF (hole rubber flat), a 150-160 track, MC145 (metal claws 145), and MCH145 (MC Hammer 145, like MC145 but the claws are little hammers)

STOP. HAMMER TIME.

Anyways. I also want a gimmicked 230 track. Oh the possibilities....


RE: Beyblade parts you want to see come true! - lord Wolfblade - Feb. 03, 2011

(Feb. 03, 2011  9:56 PM)AggregateS36 Wrote:
(Feb. 03, 2011  9:52 PM)lord Wolfblade Wrote: HRF (hole rubber flat), a 150-160 track, MC145 (metal claws 145), and MCH145 (MC Hammer 145, like MC145 but the claws are little hammers)

STOP. HAMMER TIME.

lol, i was also thinking as a performance tip: CTT (cant touch this), it moves so fast, and in a very unpredictable way that you cant touch it


RE: Beyblade parts you want to see come true! - TylerPT - Feb. 03, 2011

GOMF = get out my face

Its a metal wheel that pushes beys so HARD out of the stadium


RE: Beyblade parts you want to see come true! - Gibraltor - Feb. 03, 2011

(Feb. 03, 2011  9:56 PM)AggregateS36 Wrote: Anyways. I also want a gimmicked 230 track. Oh the possibilities....
What if it had a spiral going up it lol!

Oh oh oh! Or you could attach those little snap/popping firecrackers to it and then everytime a beyblade hits it they will pop and blow the beyblade back!


RE: Beyblade parts you want to see come true! - DJ_Joseph - Feb. 03, 2011

how about a PF that had a free spinning ball on the bottom (RB rolling ball)

in regards to mc hammer
Hammer time MCH145CCT (can spin bothways.)
clear wheel- Hammer. it has 4 hammer designs in the mold going both ways (you can flip the wheel over and have them going the other way on left spin)

Wheel- Time. simple wheel that looks like a clock that has 2 openings that every 30 secs hammers pop out while spinning and ****s up the other bey Grin (no its a count up timeer it goes 1 2 explode, of course its a ****ing countdown timer)

MCH145- what u guys said.
CCT- what you guys said


RE: Beyblade parts you want to see come true! - DJ_Joseph - Feb. 04, 2011

boomp