+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Beyblade Discussion (https://worldbeyblade.org/Forum-Beyblade-Discussion)
+--- Forum: Beyblade General (https://worldbeyblade.org/Forum-Beyblade-General)
+--- Thread: Manufactoring Errors with Your Bey (/Thread-Manufactoring-Errors-with-Your-Bey)
RE: Manufactoring Errors with Your Bey - Hazel - Apr. 10, 2012
(Apr. 10, 2012 9:59 PM)Hyper27 Wrote: An evil Fusion wheel? Wow, I didn't even know that hasbro could mess up that bad... Do you have a picture?
With their bulk packages they're actually prone to putting in different Beyblades than the box calls for - at Target, when they had the Pegasis 3-pack(Cyber, Storm, and Galaxy), you would often find packs with two Storm, or two Cyber.
RE: Manufactoring Errors with Your Bey - ~Mana~ - Apr. 10, 2012
I've had a few errors. Most were instruction sheet errors, but the most notable ones are:
My Super Vortex Stadium came with unpainted Storm Pegasus and Lightning L-Drago beys, and no sticker sheets.
My Brother's Ray Striker came with Aurora Version stickers AND Dark Bull stickers (That's a bonus xD)
My Triple Battle Set came with three Chaos Cores and had a crack down the side. (managed to get it refunded)
RE: Manufactoring Errors with Your Bey - Tri - Apr. 10, 2012
I remember buying an Earth Eagle one time that didn't have the right tip, Can you guess what it was?
It was a PD. It was to big to be a D tip, and to small to be a WD tip. It may have just been a bad molded D tip but it's pretty cool!
RE: Manufactoring Errors with Your Bey - Thunder Dome - Apr. 11, 2012
(Apr. 10, 2012 11:57 PM)TriSix Wrote: I remember buying an Earth Eagle one time that didn't have the right tip, Can you guess what it was?
It was a PD. It was to big to be a D tip, and to small to be a WD tip. It may have just been a bad molded D tip but it's pretty cool!
I wish I got that.I really want PD
(Apr. 10, 2012 11:49 PM)Manaphy12342 Wrote: I've had a few errors. Most were instruction sheet errors, but the most notable ones are:
My Super Vortex Stadium came with unpainted Storm Pegasus and Lightning L-Drago beys, and no sticker sheets.
My Brother's Ray Striker came with Aurora Version stickers AND Dark Bull stickers (That's a bonus xD)
My Triple Battle Set came with three Chaos Cores and had a crack down the side. (managed to get it refunded)
When your brother got the ray striker with the 2 sticker sheets and one was aurora unicornos stickers that is cool.Were they shiny like takara tomy's version.(I don't think it does)
RE: Manufactoring Errors with Your Bey - Annoying-Fork - Apr. 11, 2012
At my nearest Wal-mart (new Texas stadium!!!) there was an Earth Virgo with it's face backwards and horribly discolored. Like a thin powder blue blotch. Weirdest carp ever.
EDIT:
Ah, as it turns out, my Grand Ketos/Cetus WD145RS (Hasbro) has a funky RS. Just barely panned off center.
RE: Manufactoring Errors with Your Bey - T. L-Drago 9207 - May. 08, 2012
The MF tip on my newly-acquired Spiral Capricorn is a little misaligned, but I'm not going to let that stop me!
RE: Manufactoring Errors with Your Bey - Argentum - May. 08, 2012
My fang leones face bolt wont screw properly and in battle it breaks aprt
RE: Manufactoring Errors with Your Bey - Viral - May. 08, 2012
(May. 08, 2012 10:32 AM)NaLi Wrote: My fang leones face bolt wont screw properly and in battle it breaks aprtTheres probably a little crack on your facebolt, Or it's just your spin track thats broken.
RE: Manufactoring Errors with Your Bey - T. L-Drago 9207 - May. 08, 2012
Speaking of Face Bolt problems, I couldn't initially get my Nightmare Rex's Face Bolt to get in, but I wouldn't give up. I managed to break that Face Bolt in.
RE: Manufactoring Errors with Your Bey - yliadyzzuf - Jun. 10, 2012
(Jul. 14, 2011 7:59 AM)PSG-1 Wrote: My Metal Masters W105 track wouldn't let faces go through it.
I had 2 Hasbro W105s and they both broke.
RE: Manufactoring Errors with Your Bey - Wombat - Jun. 10, 2012
This isn't with my bey, but my friend's Destroy L-Drago spins both left and right. I don't know if that makes it illegal, as long as he only spun it left.
RE: Manufactoring Errors with Your Bey - Ga' - Jun. 10, 2012
You sure it's not just a fake one? They tend to do that...
RE: Manufactoring Errors with Your Bey - Wombat - Jun. 10, 2012
I bought it for him as a birthday present, it came in a TT box.
RE: Manufactoring Errors with Your Bey - Bobmcdoogal - Jun. 10, 2012
I saw a Ultimate Meteo L-Drago DF105LRF without the rubber in the tip at WAl MART.
And my Thermal Gemios T125S(from the 2 pack) Had a little bit of metal in the Theral wheel(where you put the spin track) and now when I launcher it, it acts like Basalt Horogium 145WD
RE: Manufactoring Errors with Your Bey - Eternal Blader - Jun. 10, 2012
My Basalt Horogium's 145 has a little hole on the side. I also saw one at Toys R Us that had the same hole. Is it supposed to have it?
RE: Manufactoring Errors with Your Bey - BigBangSoda145 - Jun. 11, 2012
maybe its just on of those air bubbles?? I see them in almost every clear part like face bolts and tracks
RE: Manufactoring Errors with Your Bey - LeonTempest - Jun. 12, 2012
(Jun. 10, 2012 5:17 PM)Eternal Blader Wrote: My Basalt Horogium's 145 has a little hole on the side. I also saw one at Toys R Us that had the same hole. Is it supposed to have it?
Yes
(Apr. 10, 2012 11:57 PM)TriSix Wrote: I remember buying an Earth Eagle one time that didn't have the right tip, Can you guess what it was?
It was a PD. It was to big to be a D tip, and to small to be a WD tip. It may have just been a bad molded D tip but it's pretty cool!
That does not sound possible. PD is an extremely rare, specialized tip, made out of a different material than all other plastic tips. Unless it gives off a glossier, smother surface, then it isn't PD
(Apr. 11, 2012 2:50 AM)Apply Without Wrote: At my nearest Wal-mart (new Texas stadium!!!) there was an Earth Virgo with it's face backwards and horribly discolored. Like a thin powder blue blotch. Weirdest carp ever.
EDIT:
Ah, as it turns out, my Grand Ketos/Cetus WD145RS (Hasbro) has a funky RS. Just barely panned off center.
Grand Cetus T1225RS (blue beylocker) is like that too. Strangely, my Inferno Byxis CH120RS does not have that issue.
RE: Manufactoring Errors with Your Bey - 50uNdW4v3 - Jun. 12, 2012
Until last night, I had no idea that my LDG had a small piece of metal stuck in the frame. The metal bit was probably from factory molding.
Keyword here was "stuck" though. I easily removed the bit from the frame with some tweezers.
RE: Manufactoring Errors with Your Bey - defenceblader - Jun. 12, 2012
My first bey was a ray unicorno and the D125's circle around the base broke straight away and the CS was really unreactive and never leant onto the rubber the ray wheel was always shakey I eventually sold it on and yes it is takara
RE: Manufactoring Errors with Your Bey - Unstoppable - Jun. 12, 2012
My rock orso with the 2 pack wouldnt let me take apart the tip and track until 3 months after i bought it
And my friends jade jupiters s130 falls apart with a mf but not witha mfh
RE: Manufactoring Errors with Your Bey - MyTestsAreLies - Jun. 13, 2012
My Hasbro Twisted Tempo 145 WD doesn't have a "Spiral Staircase of Death" or a gap in it... its just a round circle (My Twisted weighed exactly 50 G) and doesn't have any balance or movement issues.
RE: Manufactoring Errors with Your Bey - Kai-V - Jun. 13, 2012
(Jun. 13, 2012 3:13 AM)Mu Wrote: My Hasbro Twisted Tempo 145 WD doesn't have a "Spiral Staircase of Death" or a gap in it... its just a round circle (My Twisted weighed exactly 50 G) and doesn't have any balance or movement issues.
That is probably not a manufacturing error : are you certain you bought a real Beyblade ?
RE: Manufactoring Errors with Your Bey - MyTestsAreLies - Jun. 13, 2012
Yes, I bought it from a local Target store for $9.99.
RE: Manufactoring Errors with Your Bey - LeonTempest - Jun. 13, 2012
Pics please. I will believe it when I see it...
RE: Manufactoring Errors with Your Bey - MyTestsAreLies - Jun. 13, 2012
I sold it on ebay for 38.99 about a month ago ( but seriously, I'm not lying. ) It was definitely a manufacturing error, and a big one that too.