(Feb. 09, 2020  5:17 AM)Dasmind Wrote: I see that the blue layer has a big hole in it which is with the launcher in the packge and the bey is the sun motif one, how can the bey layer attached to the disk?
http://beybladevcrv.com/

---

(Feb. 05, 2020  10:03 PM)DPVideosNL Wrote: What are these beyblades? Season 5 beys? i heard that somebody said 3d printed but these dont look 3d printed

I mean this layer

(Feb. 12, 2020  5:33 AM)Rouzuke Wrote: Beyblade has become much more than a hobby/game now, huh? I admit I was almost close to that level, but hey, good thing my wallet is already empty so I can't really complain about lack of leaks which only pique my thirst for moar Bey-news of products and whatnot.


Anyways, the recent leaks of how the new Beys may start to look seem to be quite underwhelming, but the launcher looks dope (was that a string launcher?).

What we kind of know is that the current system is probably a rehash or "upgrade" of GT System in which the Chip System looks like it won't go away soon, but the GT Weights may no longer be customized (or molded within the Base itself like Lord, Master, Imperial). Battle Disks might be the ones that will be taking the brunt of hits in the stadium this time.

nL-esque gimmicks that activate a few clicks prior to Bursting are always welcome, but I don't really think they would be useful for competitive stages. Given how the parts were packaged in the plastic (akin to how we normally see starter and booster products come OOTB),seems that the Disks still come separate from the Layer unlike nL which is a good thing because it would make every new release have simple 3-part customization (Chip,Layer+Disk, Driver) just like how it started originally (Layer, Disk, Driver). Unless there is further clarification on the new System, I think it's safe to assume that you can probably combine the Season 5 (or 6th, if generation-wise) parts from the previous ones?

Kinda stoked that they are making new Drivers as well. Hopefully they don't just spam Dash Drivers cuz if clicks are required to activate gimmicks, then Burst resistance should be balanced out. Otherwise, we all might just as well Superglue our Beys together and revert back to MFB or Plastic gen rules without the Bursting component.

(Feb. 12, 2020  5:53 AM)CitrusNinja3 Wrote:

(Feb. 12, 2020  5:33 AM)Rouzuke Wrote: Beyblade has become much more than a hobby/game now, huh? I admit I was almost close to that level, but hey, good thing my wallet is already empty so I can't really complain about lack of leaks which only pique my thirst for moar Bey-news of products and whatnot.


Anyways, the recent leaks of how the new Beys may start to look seem to be quite underwhelming, but the launcher looks dope (was that a string launcher?).

What we kind of know is that the current system is probably a rehash or "upgrade" of GT System in which the Chip System looks like it won't go away soon, but the GT Weights may no longer be customized (or molded within the Base itself like Lord, Master, Imperial). Battle Disks might be the ones that will be taking the brunt of hits in the stadium this time.

nL-esque gimmicks that activate a few clicks prior to Bursting are always welcome, but I don't really think they would be useful for competitive stages. Given how the parts were packaged in the plastic (akin to how we normally see starter and booster products come OOTB),seems that the Disks still come separate from the Layer unlike nL which is a good thing because it would make every new release have simple 3-part customization (Chip,Layer+Disk, Driver) just like how it started originally (Layer, Disk, Driver). Unless there is further clarification on the new System, I think it's safe to assume that you can probably combine the Season 5 (or 6th, if generation-wise) parts from the previous ones?

Kinda stoked that they are making new Drivers as well. Hopefully they don't just spam Dash Drivers cuz if clicks are required to activate gimmicks, then Burst resistance should be balanced out. Otherwise, we all might just as well Superglue our Beys together and revert back to MFB or Plastic gen rules without the Bursting component.

Something you seem to be missing (which I also didn't see at first, so I don't blame you) is that Weights are replaced rather than removed. There seems to be metal integrated in the "Bases" and the new part that get sandwiched like Weights, which I like to call the Attack Ring. Basically, it looks like you'll be able to put these "Attack Rings" on a Layer to change its overall perimeter, even if it's just on the top. The Disks being fused with the Layers makes very little sense to me, since the Disk is clearly identifiable unlike nL, so the gimmicks might just have to do with Disk interactions? Either way, I hope these are Frame-compatible just to keep up the customization and to not nerf Bases on accident by limiting their LAD.

(Feb. 12, 2020  6:10 AM)Rouzuke Wrote:

(Feb. 12, 2020  5:53 AM)CitrusNinja3 Wrote: Something you seem to be missing (which I also didn't see at first, so I don't blame you) is that Weights are replaced rather than removed. There seems to be metal integrated in the "Bases" and the new part that get sandwiched like Weights, which I like to call the Attack Ring. Basically, it looks like you'll be able to put these "Attack Rings" on a Layer to change its overall perimeter, even if it's just on the top. The Disks being fused with the Layers makes very little sense to me, since the Disk is clearly identifiable unlike nL, so the gimmicks might just have to do with Disk interactions? Either way, I hope these are Frame-compatible just to keep up the customization and to not nerf Bases on accident by limiting their LAD.

Basically you're saying it's like a beefed-up Naked Diabolos.Paradox -esque design? I did mention that the "Bases" may have the metal Weights molded into them as I can only see the "Chip" disassembled with the "Base". The Disk doesn't seem to require any disassembly (unless every single "Attack Ring" can be flipped over like Paradox), but I doubt it'd be Frame-compatible, especially if it can be flipped over like Paradox. What I'm afraid of is that the cross-compatibility will be limited to just the Drivers (which I think was what I meant by hoping it won't be "nL-esue" which only can be customized by Frame and Driver) in case the "Base" needs the "Attack Ring" sandwiched with the new Disks to actually function (like Naked, cuz it really can't do much without Paradox) which makes it essentially a Layer+Disk.Driver combo.

Again, we're dealing with speculations based on (hopefully not) intentionally unclear leaks so far, and it may still not be the finalized products (kinda like a WIP? or prototype?), and they may just as well trash the whole thing and go back to the drawing board,

(Feb. 12, 2020  4:48 PM)ReekoBlader Wrote: I don’t think that the layer weight has been removed or replaced, but rather, Upgraded...
I believe that we still will have a layer weight in this system too..

Look at the Black Sun motif bey, or that Valkyrie prototype...
Y’all notice those 4 Lil blocks of metal on the inside of the bey, surrounding the chips?? Well, look now at the blue bey that was in the packaging next to that soupersauce launcher.... the metal is nowhere to be found... those metal parts are not on the layer base, or the chip. Which may mean that that was a separate part....

If so, then I believe that they’re keeping the layer weight as a customizable part... and it makes sense... if this is an upgrade of GT... then why would the take a step backwards and remove a part that made GT... GT?

(Feb. 12, 2020  6:48 PM)Suzaku-X Wrote: My working theory is the disc essentially "completes" the layer, gives it a bottom perimeter, so it would make sense that it needs the disc for construction of the layer

(Feb. 13, 2020  5:04 AM)Dasmind Wrote: https://twitter.com/orihakategnat/status/1227788736173244416?s=20

(Feb. 13, 2020  5:11 AM)LOL-y Rancher Wrote:

(Feb. 13, 2020  5:04 AM)Dasmind Wrote: https://twitter.com/orihakategnat/status/1227788736173244416?s=20

These are great finds, thank you very much.

The new Valkyrie looks very cool and the centre looks like a new version of the Gen Weight from GT, except made for this system.

(Feb. 13, 2020  5:04 AM)Dasmind Wrote: https://twitter.com/orihakategnat/status/1227788736173244416?s=20

(Feb. 13, 2020  5:20 AM)JoMario67 Wrote: Very interesting.  I'm not sure I like the color scheme, but the base looks like a mix of Winning and Slash's design.  Anyone else notice how the Valkyrie has a red face tattoo just like Valt

(Feb. 13, 2020  5:13 AM)Dasmind Wrote:

(Feb. 13, 2020  5:11 AM)LOL-y Rancher Wrote: These are great finds, thank you very much.

The new Valkyrie looks very cool and the centre looks like a new version of the Gen Weight from GT, except made for this system.

Brave Valkyrie and new animations also ignite!

(Feb. 13, 2020  6:58 AM)Jinbee Wrote: The sparking launchers sound cool, and these new beys look cool too. But the Valkyrie's layer with the circular core, similar to God Valkyrie, makes me thinks the wings move somehow, I wonder if the beys will spark too, sorta like Sparking Attacker from the old gen system.

(Feb. 13, 2020  6:38 AM)Dasmind Wrote: Beyblade burst  Sparking by marutti

---

Two new main characters

---

https://mobile.twitter.com/tototoshe/status/1227816962341797888/photo/1