+- World Beyblade Organization (https://worldbeyblade.org)
+-- Forum: Off-Topic Forums (https://worldbeyblade.org/Forum-Off-Topic-Forums)
+--- Forum: Your Creations (https://worldbeyblade.org/Forum-Your-Creations)
+--- Thread: 3D Printing GreenK9148's 3D printed Beyblade designs. (details on commissions in FIRST POST!) (/Thread-3D-Printing-GreenK9148-s-3D-printed-Beyblade-designs-details-on-commissions-in-FIRST-POST)
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - Master_chanter0 - Dec. 02, 2020
(Dec. 02, 2020 5:11 PM)GreenK9148 Wrote:(Dec. 02, 2020 2:25 AM)6Jupiter5 Wrote: Look at my pfp, it tells the full story.
GreenK9148 the ridges have an awakening. They break ever so slightly and increase defensive powers
Uh, yeah I totally meant that as a gimmick
Sure.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Dec. 02, 2020
(Dec. 02, 2020 5:28 PM)Master_chanter0 Wrote:(Dec. 02, 2020 5:11 PM)GreenK9148 Wrote: Uh, yeah I totally meant that as a gimmick
Sure.
Me:*sweats even harder*
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Dec. 04, 2020
Since the success of basalt horogium/twisted tempo. I’m announcing that I will be starting project: Phantom Orion. This will be a sparking layer system and will be the first of my designs to have a gimmick. Like the MFB version, you can flip the metal ring upside down.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - Master_chanter0 - Dec. 04, 2020
(Dec. 04, 2020 4:59 PM)GreenK9148 Wrote: Since the success of basalt horogium/twisted tempo. I’m announcing that I will be starting project: Phantom Orion. This will be a sparking layer system and will be the first of my designs to have a gimmick. Like the MFB version, you can flip the metal ring upside down.
Ooh, I'm looking forward to this.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Dec. 04, 2020
(Dec. 04, 2020 5:07 PM)Master_chanter0 Wrote:(Dec. 04, 2020 4:59 PM)GreenK9148 Wrote: Since the success of basalt horogium/twisted tempo. I’m announcing that I will be starting project: Phantom Orion. This will be a sparking layer system and will be the first of my designs to have a gimmick. Like the MFB version, you can flip the metal ring upside down.
Ooh, I'm looking forward to this.
Thanks, once I’m done with the prototype, can you print it out so it fits?
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - Master_chanter0 - Dec. 05, 2020
(Dec. 04, 2020 10:38 PM)GreenK9148 Wrote:(Dec. 04, 2020 5:07 PM)Master_chanter0 Wrote: Ooh, I'm looking forward to this.
Thanks, once I’m done with the prototype, can you print it out so it fits?
Sure I will. Just there is no hurry, I'm not opening the 3D printer until like 6 days from now.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Dec. 05, 2020
(Dec. 05, 2020 12:13 AM)Master_chanter0 Wrote:(Dec. 04, 2020 10:38 PM)GreenK9148 Wrote: Thanks, once I’m done with the prototype, can you print it out so it fits?
Sure I will. Just there is no hurry, I'm not opening the 3D printer until like 6 days from now.
Ok np, take as much time needed.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - Master_chanter0 - Dec. 08, 2020
(Dec. 05, 2020 12:49 AM)GreenK9148 Wrote:(Dec. 05, 2020 12:13 AM)Master_chanter0 Wrote: Sure I will. Just there is no hurry, I'm not opening the 3D printer until like 6 days from now.
Ok np, take as much time needed.
Can I get a progress update because not too long now only a day or two.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Dec. 09, 2020
(Dec. 08, 2020 9:20 PM)Master_chanter0 Wrote:(Dec. 05, 2020 12:49 AM)GreenK9148 Wrote: Ok np, take as much time needed.
Can I get a progress update because not too long now only a day or two.
I have the prototype ready:https://www.tinkercad.com/things/5K2YCipgH08-phantom-orion-proto
Also, in addition to phantom Orion, I will be making another 4D metal fight beyblade (burst remake), I was originally going to make it for myself. But, I will put up a poll soon, if anyone guesses the bey correctly, they can see and download the file. Otherwise I might make it available to non-winners if they pay a fee of 1 USD.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - Master_chanter0 - Dec. 09, 2020
(Dec. 09, 2020 12:38 AM)GreenK9148 Wrote:(Dec. 08, 2020 9:20 PM)Master_chanter0 Wrote: Can I get a progress update because not too long now only a day or two.
I have the prototype ready:https://www.tinkercad.com/things/5K2YCipgH08-phantom-orion-proto
Also, in addition to phantom Orion, I will be making another 4D metal fight beyblade (burst remake), I was originally going to make it for myself. But, I will put up a poll soon, if anyone guesses the bey correctly, they can see and download the file. Otherwise I might make it available to non-winners if they pay a fee of 1 USD.
Alright. I'm actually assembling it now but no guarantees I will be able to print it tomorrow or today. I want that file for the other burst remake.
I get it even if I don't guess correctly, right? Because I am a tester? You don't have to answer.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Dec. 09, 2020
(Dec. 09, 2020 1:14 AM)Master_chanter0 Wrote:Idk. I’ll probably only give you a prototype of it.(Dec. 09, 2020 12:38 AM)GreenK9148 Wrote: I have the prototype ready:https://www.tinkercad.com/things/5K2YCipgH08-phantom-orion-proto
Also, in addition to phantom Orion, I will be making another 4D metal fight beyblade (burst remake), I was originally going to make it for myself. But, I will put up a poll soon, if anyone guesses the bey correctly, they can see and download the file. Otherwise I might make it available to non-winners if they pay a fee of 1 USD.
Alright. I'm actually assembling it now but no guarantees I will be able to print it tomorrow or today. I want that file for the other burst remake.
I get it even if I don't guess correctly, right? Because I am a tester? You don't have to answer.
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - Master_chanter0 - Dec. 09, 2020
(Dec. 09, 2020 1:30 AM)GreenK9148 Wrote:(Dec. 09, 2020 1:14 AM)Master_chanter0 Wrote: Alright. I'm actually assembling it now but no guarantees I will be able to print it tomorrow or today. I want that file for the other burst remake.Idk. I’ll probably only give you a prototype of it.
I get it even if I don't guess correctly, right? Because I am a tester? You don't have to answer.
Alright. Update, 3D printer is assembled and fully functional. I will expect to be able to have a good print of it Friday, absolute latest. More likely today however. And that's fine.
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - GreenK9148 - Dec. 09, 2020
(Dec. 09, 2020 4:33 PM)Master_chanter0 Wrote:(Dec. 09, 2020 1:30 AM)GreenK9148 Wrote: Idk. I’ll probably only give you a prototype of it.
Alright. Update, 3D printer is assembled and fully functional. I will expect to be able to have a good print of it Friday, absolute latest. More likely today however. And that's fine.
Apparently, 2 people voted that I’m too bad soooooooo
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - Master_chanter0 - Dec. 09, 2020
(Dec. 09, 2020 5:11 PM)GreenK9148 Wrote:(Dec. 09, 2020 4:33 PM)Master_chanter0 Wrote: Alright. Update, 3D printer is assembled and fully functional. I will expect to be able to have a good print of it Friday, absolute latest. More likely today however. And that's fine.
Apparently, 2 people voted that I’m too bad soooooooo
I was wondering about that. You changed to poll but my vote stands.
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - GreenK9148 - Dec. 09, 2020
(Dec. 09, 2020 7:13 PM)Master_chanter0 Wrote:(Dec. 09, 2020 5:11 PM)GreenK9148 Wrote: Apparently, 2 people voted that I’m too bad soooooooo
I was wondering about that. You changed to poll but my vote stands.
What was your vote again? Sorry
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - Master_chanter0 - Dec. 09, 2020
(Dec. 09, 2020 10:48 PM)GreenK9148 Wrote:(Dec. 09, 2020 7:13 PM)Master_chanter0 Wrote: I was wondering about that. You changed to poll but my vote stands.
What was your vote again? Sorry
Diablo nemesis.
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - LeonidasKerbeus - Dec. 09, 2020
GreenK9148
so
uh
did you ever finish my commission?
just wondering about any progress
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - GreenK9148 - Dec. 09, 2020
(Dec. 09, 2020 11:07 PM)LeonidasKerbeus Wrote: GreenK9148
so
uh
did you ever finish my commission?
just wondering about any progress
I wasn’t sure if you responded to me saying it was a paid commission. I do have a place holder for you though, and I can start whenever.
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - Master_chanter0 - Dec. 10, 2020
(Dec. 09, 2020 11:17 PM)GreenK9148 Wrote:(Dec. 09, 2020 11:07 PM)LeonidasKerbeus Wrote: GreenK9148
so
uh
did you ever finish my commission?
just wondering about any progress
I wasn’t sure if you responded to me saying it was a paid commission. I do have a place holder for you though, and I can start whenever.
I will print orion tonight. I need to recalibrate the printer.
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - 6Jupiter5 - Dec. 16, 2020
I noticed a problem with Tempo, it doesn’t fit on launchers
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - Master_chanter0 - Dec. 21, 2020
(Dec. 16, 2020 3:38 AM)6Jupiter5 Wrote: I noticed a problem with Tempo, it doesn’t fit on launchers
Did you forget to take the supports off?
GreenK9148 I printed tempo but I flipped it upside down and somehow made it left spin in the process I was laughing so hard.
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - 6Jupiter5 - Dec. 21, 2020
(Dec. 21, 2020 8:47 PM)Master_chanter0 Wrote:(Dec. 16, 2020 3:38 AM)6Jupiter5 Wrote: I noticed a problem with Tempo, it doesn’t fit on launchers
Did you forget to take the supports off?
GreenK9148 I printed tempo but I flipped it upside down and somehow made it left spin in the process I was laughing so hard.
What supports?
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - Master_chanter0 - Dec. 21, 2020
(Dec. 21, 2020 9:23 PM)6Jupiter5 Wrote:(Dec. 21, 2020 8:47 PM)Master_chanter0 Wrote: Did you forget to take the supports off?
GreenK9148 I printed tempo but I flipped it upside down and somehow made it left spin in the process I was laughing so hard.
What supports?
Did you slice it with supports?
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - 6Jupiter5 - Dec. 21, 2020
(Dec. 21, 2020 9:41 PM)Master_chanter0 Wrote:(Dec. 21, 2020 9:23 PM)6Jupiter5 Wrote: What supports?
Did you slice it with supports?
I have no clue what you’re talking about. Here’s some pictures: https://drive.google.com/file/d/1EDP62MCCKkN27wDX8-KdcX7Pvtws54-E/view?usp=drivesdk , https://drive.google.com/file/d/1YleRt-EeSFdbbt9tSmITmAljdNHurbFc/view?usp=drivesdk , https://drive.google.com/file/d/1BKzazx5uHPQ1Dp1G4VDLRow8norucbo5/view?usp=drivesdk
RE: GreenK9148 does 3D printing commissions. Read first post. (File giveaway, 1st post) - Master_chanter0 - Dec. 21, 2020
(Dec. 21, 2020 9:46 PM)6Jupiter5 Wrote:(Dec. 21, 2020 9:41 PM)Master_chanter0 Wrote: Did you slice it with supports?
I have no clue what you’re talking about. Here’s some pictures: https://drive.google.com/file/d/1EDP62MCCKkN27wDX8-KdcX7Pvtws54-E/view?usp=drivesdk , https://drive.google.com/file/d/1YleRt-EeSFdbbt9tSmITmAljdNHurbFc/view?usp=drivesdk , https://drive.google.com/file/d/1BKzazx5uHPQ1Dp1G4VDLRow8norucbo5/view?usp=drivesdk
No, you didn't then. Ok I see what you mean.
fyi (Click to View)