+- World Beyblade Organization (https://worldbeyblade.org)
+-- Forum: Off-Topic Forums (https://worldbeyblade.org/Forum-Off-Topic-Forums)
+--- Forum: Your Creations (https://worldbeyblade.org/Forum-Your-Creations)
+--- Thread: 3D Printing GreenK9148's 3D printed Beyblade designs. (details on commissions in FIRST POST!) (/Thread-3D-Printing-GreenK9148-s-3D-printed-Beyblade-designs-details-on-commissions-in-FIRST-POST)
RE: GreenK9148 decides to do 3D printing commissions. Commissions status: Open - GreenK9148 - Oct. 19, 2020
(Oct. 19, 2020 7:50 PM)LeonidasKerbeus Wrote:Yep, couldn't find out how to do that, but I did do the ridges.(Oct. 14, 2020 6:41 PM)GreenK9148 Wrote: 6Jupiter5 here's the updated twisted tempo:oh god the spiral staircase is gone we're all done
https://www.tinkercad.com/things/1iljXvftmtt-twisted-tempo
its all over
its going to destroy
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - The Blacknight - Oct. 19, 2020
if its still free, a Sparking trident, but i have two requests: could u leave spaces where I could put rubber from like an eraser, and a cookie-cutter type template where i could use it to cut the shape of the rubber on the eraser? i will send more details later(if it is free)
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Oct. 19, 2020
(Oct. 19, 2020 8:12 PM)The Blacknight Wrote: if its still free, a Sparking trident, but i have two requests: could u leave spaces where I could put rubber from like an eraser, and a cookie-cutter type template where i could use it to cut the shape of the rubber on the eraser? i will send more details later(if it is free)Sry, it's not free anymore. Only the first five were.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - The Blacknight - Oct. 19, 2020
(Oct. 19, 2020 8:20 PM)GreenK9148 Wrote:(Oct. 19, 2020 8:12 PM)The Blacknight Wrote: if its still free, a Sparking trident, but i have two requests: could u leave spaces where I could put rubber from like an eraser, and a cookie-cutter type template where i could use it to cut the shape of the rubber on the eraser? i will send more details later(if it is free)Sry, it's not free anymore. Only the first five were.
okay, nvm
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Oct. 21, 2020
Samurai ifrit evo chip: https://www.tinkercad.com/things/5Gem8PQoZNU-ifrit-chip-commission-for-ali-baba
Ali Baba
I will finish the ring shortly
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - Ali Baba - Oct. 21, 2020
(Oct. 21, 2020 10:53 PM)GreenK9148 Wrote: Samurai ifrit evo chip: https://www.tinkercad.com/things/5Gem8PQoZNU-ifrit-chip-commission-for-ali-babaWow, it's awesome, thank you so much
Ali Baba
I will finish the ring shortly
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Oct. 22, 2020
(Oct. 21, 2020 10:58 PM)Ali Baba Wrote:(Oct. 21, 2020 10:53 PM)GreenK9148 Wrote: Samurai ifrit evo chip: https://www.tinkercad.com/things/5Gem8PQoZNU-ifrit-chip-commission-for-ali-babaWow, it's awesome, thank you so much
Ali Baba
I will finish the ring shortly
Thanks! I'm working on the ring right now.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Oct. 24, 2020
Requests/commissions are closed now, I will update it once I make some room for more. Ifrtit evo design is almost finished Ali Baba
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Nov. 03, 2020
Ali Baba samurai Ifrit evo: https://www.tinkercad.com/things/eD2cJSGyVJ7-samurai-ifraidifrit-evo
Leak for next project: Name: Toxin Skorpios.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - Ali Baba - Nov. 03, 2020
(Nov. 03, 2020 12:08 AM)GreenK9148 Wrote: Ali Baba samurai Ifrit evo: https://www.tinkercad.com/things/eD2cJSGyVJ7-samurai-ifraidifrit-evoIt's awesome! Thank you for making it!
Leak for next project: Name: Toxin Skorpios.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Nov. 03, 2020
(Nov. 03, 2020 12:26 AM)Ali Baba Wrote:(Nov. 03, 2020 12:08 AM)GreenK9148 Wrote: Ali Baba samurai Ifrit evo: https://www.tinkercad.com/things/eD2cJSGyVJ7-samurai-ifraidifrit-evoIt's awesome! Thank you for making it!
Leak for next project: Name: Toxin Skorpios.
No problem.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Nov. 05, 2020
Skorpios chip: https://www.tinkercad.com/things/i3WvfErSN9M
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - beykid44 - Nov. 05, 2020
all around me are familiar faces worn out faces: when it free again can u make chronos evo sparking
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Nov. 06, 2020
(Nov. 05, 2020 11:55 PM)beykid44 Wrote: all around me are familiar faces worn out faces: when it free again can u make chronos evo sparking
Uhh, that’ll be on my 1000th post mark.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - 6Jupiter5 - Nov. 20, 2020
My teacher is printing out tempo for me as we speak
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - 6Jupiter5 - Nov. 24, 2020
GreenK9148 Tempo is done. It’s a beast and can beat Mirage, I might feature it on my channel, any way to mention you?
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Nov. 24, 2020
(Nov. 24, 2020 3:55 PM)6Jupiter5 Wrote: GreenK9148 Tempo is done. It’s a beast and can beat Mirage, I might feature it on my channel, any way to mention you?
Yes, can you please either show my tinkercad or this thread? If not can you mention my username pls? Thanks.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - 6Jupiter5 - Nov. 28, 2020
Didn’t want to make a thread for this, so I wanted to post some testing for twisted tempo with wheel and revolve (yes, I used the parts on glide as a makeshift stock combo)
Twisted Tempo wheel revolve vs Mirage Fafnir stock:
Tt: 70% (os)
Mf: 30% (1 burst, 2 ko)
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Nov. 28, 2020
(Nov. 28, 2020 7:15 AM)6Jupiter5 Wrote: Didn’t want to make a thread for this, so I wanted to post some testing for twisted tempo with wheel and revolve (yes, I used the parts on glide as a makeshift stock combo)
Twisted Tempo wheel revolve vs Mirage Fafnir stock:
Tt: 70% (os)
Mf: 30% (1 burst, 2 ko)
I’m looking to make further improvements in detail and maybe a sparking version. Any suggestions?
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - 6Jupiter5 - Nov. 28, 2020
(Nov. 28, 2020 4:36 PM)GreenK9148 Wrote:(Nov. 28, 2020 7:15 AM)6Jupiter5 Wrote: Didn’t want to make a thread for this, so I wanted to post some testing for twisted tempo with wheel and revolve (yes, I used the parts on glide as a makeshift stock combo)
Twisted Tempo wheel revolve vs Mirage Fafnir stock:
Tt: 70% (os)
Mf: 30% (1 burst, 2 ko)
I’m looking to make further improvements in detail and maybe a sparking version. Any suggestions?
I mean like, it’s really solid as it is and you did add the spiral staircase (the ridges). If you are making a sparking version then make it have a infinite spiral staircase.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - GreenK9148 - Nov. 28, 2020
(Nov. 28, 2020 5:53 PM)6Jupiter5 Wrote:K, I will try.(Nov. 28, 2020 4:36 PM)GreenK9148 Wrote: I’m looking to make further improvements in detail and maybe a sparking version. Any suggestions?
I mean like, it’s really solid as it is and you did add the spiral staircase (the ridges). If you are making a sparking version then make it have a infinite spiral staircase.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - beykid44 - Nov. 28, 2020
(Nov. 20, 2020 12:54 AM)6Jupiter5 Wrote: My teacher is printing out tempo for me as we speak
How are u inperson school?
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - Master_chanter0 - Nov. 28, 2020
(Nov. 28, 2020 7:14 PM)beykid44 Wrote:(Nov. 20, 2020 12:54 AM)6Jupiter5 Wrote: My teacher is printing out tempo for me as we speak
How are u inperson school?
Some schools are doing hybrid.
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - beykid44 - Nov. 28, 2020
(Nov. 28, 2020 8:14 PM)Master_chanter0 Wrote:(Nov. 28, 2020 7:14 PM)beykid44 Wrote: How are u inperson school?
Some schools are doing hybrid.
:c aw man wish mine was doing hybrid
RE: GreenK9148 decides to do 3D printing commissions. Read first post. - Master_chanter0 - Nov. 28, 2020
(Nov. 28, 2020 8:23 PM)beykid44 Wrote:(Nov. 28, 2020 8:14 PM)Master_chanter0 Wrote: Some schools are doing hybrid.
:c aw man wish mine was doing hybrid
Whether or not they do do hybrid depends on the covid situation where you live.