+- World Beyblade Organization (https://worldbeyblade.org)
+-- Forum: Other (https://worldbeyblade.org/Forum-Other)
+--- Forum: Closed Threads (https://worldbeyblade.org/Forum-Closed-Threads)
+--- Thread: Face Contest: Design a Beyblade, Space-Style! (/Thread-Face-Contest-Design-a-Beyblade-Space-Style)
RE: Face Contest: Design a Beyblade, Space-Style! - Benjohadi - Sep. 14, 2011
(Sep. 14, 2011 2:02 PM)lord Wolfblade Wrote: so what do people think of my entry?
i didn't color it but i have both a 2d top view and a 3d side view for all parts
no offend..colors will make your design interesting..without doubt..but i think spike on your ar will result the bey to be very very fragile..
but i like your bearing change gear..its interesting..
RE: Face Contest: Design a Beyblade, Space-Style! - DasherDeath - Sep. 14, 2011
This is my beyblade.
It's called "Supernova Explosion 145 WBR." Type defense.
http://i53.tinypic.com/2zeil3n.jpg
The Beyblade is based on the supernova explosion is a stellar That is more energetic than a nova.
The colors applied to the various components of beyblade are based on the colors seen several photos of supernovae.
The face is a supernova stylized purple transparent.
The wheel is clear to opaque blue with bright yellow rays of the whole that relate light emission of the supernova.
As for the metal wheel is the defense of the bosses to 'outside so as to counter some attacks beyblade low.
The track 145 is the blue color is always susceptible to attack by beyblade very low.
However, this should not be seen as a disadvantage, since normally the length of Beyblade Beyblades are not used against an attack.
As for the bottom WRB (WideRubberBall) is very similar to the WB a bottom but with the difference that the center of the bottom is inserted into the rubber with round toe.
This makes the beyblade is not immediately thrown out because the rubber creates more friction.
RE: Face Contest: Design a Beyblade, Space-Style! - lord Wolfblade - Sep. 14, 2011
(Sep. 14, 2011 2:22 PM)Benjohadi Wrote:(Sep. 14, 2011 2:02 PM)lord Wolfblade Wrote: so what do people think of my entry?
i didn't color it but i have both a 2d top view and a 3d side view for all parts
no offend..colors will make your design interesting..without doubt..but i think spike on your ar will result the bey to be very very fragile..
but i like your bearing change gear..its interesting..
no time to color and i didn't have the colors i wanted. but i do agree, i really wanted to color it
that is why it is very thick
thanks, i have been thinking of a idea like that for a while
thanks for your input
RE: Face Contest: Design a Beyblade, Space-Style! - Sol - Sep. 14, 2011
someone wants to comment on my drawing? thanks
RE: Face Contest: Design a Beyblade, Space-Style! - Relic - Sep. 14, 2011
(Sep. 14, 2011 3:42 PM)Sol Blaze10 Wrote: someone wants to comment on my drawing? thanks
(Aug. 14, 2011 5:17 PM)Kai-V Wrote: (You can also talk about the contest, ideas, or whatever in this thread as well, but don't ask for direct feedback on your drafts!)
RE: Face Contest: Design a Beyblade, Space-Style! - Sol - Sep. 14, 2011
ok, I did not know
RE: Face Contest: Design a Beyblade, Space-Style! - Kai-V - Sep. 14, 2011
Something that is posted is not a draft anymore, it is an official entry.
RE: Face Contest: Design a Beyblade, Space-Style! - Relic - Sep. 14, 2011
Okay,so you mean you can ask for feedback on your official entries?
Correct me if i'm wrong.
RE: Face Contest: Design a Beyblade, Space-Style! - Kai-V - Sep. 14, 2011
People have been asking for it and we have not done anything against it, so yes, it is OK.
What is prohibited is posting something saying it is only a draft, and asking for feedback on that.
RE: Face Contest: Design a Beyblade, Space-Style! - Relic - Sep. 14, 2011
Any opinions on my entry?Anyone?
Sol Blaze10,I was mistaken,I'm sorry!
RE: Face Contest: Design a Beyblade, Space-Style! - Janstarblast - Sep. 14, 2011
@Bladestar20- Good entry, Bladestar!
dei- Hehe! I meant that you would surely knock off one of the people who are sure to win, atm.
Well, now because it is allowed, anyone has any questions/comments/criticism about my entry? It is on Page 33.
RE: Face Contest: Design a Beyblade, Space-Style! - Relic - Sep. 14, 2011
The idea and the name are pretty good!
I like the design of the metal wheel,looks epic!
RE: Face Contest: Design a Beyblade, Space-Style! - Justaway - Sep. 14, 2011
BladeStar...your idea was quite unique but I feel that coloring your entry would have made it better...but thats entirely my opinion...your bey is good overall
RE: Face Contest: Design a Beyblade, Space-Style! - Relic - Sep. 14, 2011
Your opinion is yours
thanks !Your entry was beast! That solar panel thing looks sick !
All the last entries are awesome!
RE: Face Contest: Design a Beyblade, Space-Style! - Cyber Kerberous - Sep. 14, 2011
Here's my entry:
http://s1113.photobucket.com/albums/k502/CyberKerberous/
All the photos in the above link are part of my entry (I hope this is a valid way to submit them). Some of them are the parts, the others are images of the poster.
Description:
Face: Pulsar
The face depicts Pulsar, a highly magnetised neutron star. Writing saying 'Pulsar' is found underneath the image.
Clear Wheel: Pulsar
The clear wheel is heavy (3.2g) but is not very aerodynamic, having little stamina. It had 10 protrusions surrounding the centre and the edge is an obscure, yet symmetrical, shape.
Metal Wheel: Magneus
Magneus is a three-tier metal wheel featuring a free-spinning plastic disc in the middle. This is meant to deflect attacks as other blades make contact. It's direction can be changed.
The Top Tier has two large 'wing-like' structures on either side that make up the majority of the wheels surface area. Theses are lightly engraved with 'Magneus', though it isnot easily visible. However, the metal of this wheel is not very thick, so it is not extremely heavy.
The bottom tier has two smaller wings asymmetrical to the first tiers when put together. This tier is the 'core'.
The wheel can be easily put together by aligning the ridges in the core with those in the first tier. The second, plastic tier can be placed over the launcher-prong slots before the top tier. It is illegal to use the wheel without the second tier.
Track: Metal Disc 145 (MD145)
The track of this bey is MD145, a plastic centre surrounded by a metal disc via plastic rods. Though thin, the metal of the disc is sturdy enough to withstand heavy hits. However, this means that the track is not at all heavy compared to other, larger tracks.
Bottom: Gyro Ball (GB)
The bottom features a unique design, in which the metal ball in the middle can spin freely in battle (similar to that of Draciel's in the older series). Only the ball is metal- the other parts are plastic.
Summary:
Overall, Magneus Pulsar MD145GB is a strong bey but it can easily be outclassed in defense and stamina by Basalt. It's best part is MD145, as it is heavy (useful for defense) and very aerodynamic (useful for stamina). However, this bey is still worth buying when it comes out (which it will mwuhahaha >
).RE: Face Contest: Design a Beyblade, Space-Style! - alek789 - Sep. 14, 2011
How do you add "Spoilers"?!
Sorry, Imma, dumb
RE: Face Contest: Design a Beyblade, Space-Style! - Kai-V - Sep. 14, 2011
(Sep. 14, 2011 7:11 PM)alek789 Wrote: How do you add "Spoilers"?!
Sorry, Imma, dumb
You should use the Search function; that question has been asked many times.
RE: Face Contest: Design a Beyblade, Space-Style! - Sniper - Sep. 14, 2011
Well here is my entry
* Large Pictures
my scanner made some of the pictures light
Stellar Voltanis AB150 EA
Facebolt:Voltanis 5.1 G
Spoiler (Click to View)
Clear Wheel: Voltanis 45.6 G
Spoiler (Click to View)
Metal wheel
tellar Spoiler (Click to View)
Spin Track AB150(Asteroid Belt)18.2g
Spoiler (Click to View)
Performance tip: EA (Eternal Axis)
Spoiler (Click to View)
RE: Face Contest: Design a Beyblade, Space-Style! - Bleik - Sep. 14, 2011
Great work Sniper! I love it!
But the weights of the parts are a bit extreme I think
RE: Face Contest: Design a Beyblade, Space-Style! - BeyCenter - Sep. 14, 2011
Ikr? It weighs around 10+ more pounds than Basalt. I think we just found out metagame changer. Lol, but ya, its pretty cool.
A 5.1 gram Face. A regular Face is 1.5 frams and a MF is around 3 or something.
and the CW is 45.6 GRAMS! Thats around 40+ more than regular ones. Lol.
RE: Face Contest: Design a Beyblade, Space-Style! - Sniper - Sep. 14, 2011
(Sep. 14, 2011 9:18 PM)BeyCenter Wrote: Ikr? It weighs around 10+ more pounds than Basalt. I think we just found out metagame changer. Lol, but ya, its pretty cool.
A 5.1 gram Face. A regular Face is 1.5 frams and a MF is around 3 or something.
and the CW is 45.6 GRAMS! Thats around 40+ more than regular ones. Lol.
XD XD ok ok i messed up idk what i was putting it was random and with that i really didn't see i hadn't realized that i put them in the wrong place
RE: Face Contest: Design a Beyblade, Space-Style! - Deikailo - Sep. 14, 2011
(Sep. 14, 2011 9:22 PM)Sniperâ„¢ Wrote:I would talk to Kai-V about possibly editing it.(Sep. 14, 2011 9:18 PM)BeyCenter Wrote: Ikr? It weighs around 10+ more pounds than Basalt. I think we just found out metagame changer. Lol, but ya, its pretty cool.
A 5.1 gram Face. A regular Face is 1.5 frams and a MF is around 3 or something.
and the CW is 45.6 GRAMS! Thats around 40+ more than regular ones. Lol.
XD XD ok ok i messed up idk what i was putting it was random and with that i really didn't see i hadn't realized that i put them in the wrong place
RE: Face Contest: Design a Beyblade, Space-Style! - BeyCenter - Sep. 14, 2011
Oh ya, for mine, The weight was originally thought of being 48 grams. Decided to change that cut it really doesn't suit the look. Any comments on mine?
RE: Face Contest: Design a Beyblade, Space-Style! - the_Zephinator - Sep. 14, 2011
Finally, done my entry. Yup I know kinda late but I hope it's ok.
My entry is Lunar HydraM100XRF
Face: http://imageshack.us/photo/my-images/204/facebolt.jpg/
Clear Wheel: http://imageshack.us/photo/my-images/684/clearwheel.jpg/
Metal Wheel: http://imageshack.us/photo/my-images/836/metalwheel.jpg/
Track: http://imageshack.us/photo/my-images/832/tracklr.jpg/
Tip: http://imageshack.us/photo/my-images/690/tipd.jpg/
Assembled Beyblade: http://imageshack.us/photo/my-images/64/assembledlunarhydra.jpg/
Full Beyblade Page: http://imageshack.us/photo/my-images/834/lunarhydrus.jpg/
I hand drew it in black ink and then scanned it in to Adobe Photoshop to add the colours.
My Dad taught me how to use Photoshop a while back and it's come in really handy with this competition.
So there, Lunar HydraM100XRF, enjoy
RE: Face Contest: Design a Beyblade, Space-Style! - Sniper - Sep. 14, 2011
(Sep. 14, 2011 9:24 PM)Deikailo Wrote:I did "It does not matter, weights are really not needed. In previous contests, nobody mentioned weights."(Sep. 14, 2011 9:22 PM)Sniperâ„¢ Wrote:I would talk to Kai-V about possibly editing it.(Sep. 14, 2011 9:18 PM)BeyCenter Wrote: Ikr? It weighs around 10+ more pounds than Basalt. I think we just found out metagame changer. Lol, but ya, its pretty cool.
A 5.1 gram Face. A regular Face is 1.5 frams and a MF is around 3 or something.
and the CW is 45.6 GRAMS! Thats around 40+ more than regular ones. Lol.
XD XD ok ok i messed up idk what i was putting it was random and with that i really didn't see i hadn't realized that i put them in the wrong place