(Jun. 10, 2020  7:05 PM)Sunset Blader Wrote: I made a sparking Evolution for Forneus.

---

It's called Mikado Forneus because Mikado stands for Emperor

---

https://www.tinkercad.com/things/gc0TmkmYIWV-mikado-forneus

(Jun. 12, 2020  2:05 PM)Ali Baba Wrote: Someone can convert a draw into a 3d model?

(Jun. 14, 2020  10:02 PM)Sunset Blader Wrote: I made a new Sparking bey as an evolution to Archer Hercules. I call it Snipershot Hercules. The credit of the name goes to MagikHorse and CitrusNinja. Keep in mind that you need to assemble this bey. Here it is: https://www.tinkercad.com/things/56ibEkEDqce-beyblade-burst-sparking-snipershot-hercules

---

I might have to finish some work on it

---

But I do have a single layer Salamander that I want to share:  https://www.tinkercad.com/things/657PamQbkjv-salamander-single-layer-beyblade

(Aug. 01, 2018  5:52 AM)CrazyAries Wrote: I've complete the 3D model of Blitz Unicorno in Burst format. But I haven't make it real because I used too much money on previous beys and now I don't have enough money...
I prepared a Layer and a Driver for Blitz Unicorno and I think Disc Triple will be a good choice so I didn't design the disc (Ans I think I have already complete the Alphabet for Disc...)

Layer - Blitz Unicorno (bU)

Spoiler (Click to View)

One thing that may disapoint you is that I didn't add the function of mode change on this layer. I think Assault mode is the one that people usually use so I just make it in Assault mode.

Driver - Dive (Dv)

Spoiler (Click to View)

The red tip is rubber. This Driver is basically a Burst format of RSF.
Also, In order to realize the feature of Track 100, I made this driver short. So the bey would be good at Upper attack, but you need to be careful as the disc may touch the stadium.

File Download

(Jun. 15, 2020  10:33 AM)xXxXSpyderXxXx Wrote:

(Aug. 01, 2018  5:52 AM)CrazyAries Wrote: I've complete the 3D model of Blitz Unicorno in Burst format. But I haven't make it real because I used too much money on previous beys and now I don't have enough money...
I prepared a Layer and a Driver for Blitz Unicorno and I think Disc Triple will be a good choice so I didn't design the disc (Ans I think I have already complete the Alphabet for Disc...)

Layer - Blitz Unicorno (bU)

Spoiler (Click to View)

One thing that may disapoint you is that I didn't add the function of mode change on this layer. I think Assault mode is the one that people usually use so I just make it in Assault mode.

Driver - Dive (Dv)

Spoiler (Click to View)

The red tip is rubber. This Driver is basically a Burst format of RSF.
Also, In order to realize the feature of Track 100, I made this driver short. So the bey would be good at Upper attack, but you need to be careful as the disc may touch the stadium.

File Download

I just made a superking ring version of this. Tell me if there are any issues as I haven't printed and tested it

link

(Jun. 16, 2020  12:38 AM)Sunset Blader Wrote: That looks AWESOME! Wish I could print it but sadly i can't. Only thing I have to say is that you should probably bring the base of the ring up a little. also The ring template you are using isn't compatible with the Chips. I found a working template right here: https://www.thingiverse.com/thing:4367432

---

(Jun. 15, 2020  10:33 AM)xXxXSpyderXxXx Wrote: I just made a superking ring version of this. Tell me if there are any issues as I haven't printed and tested it

link

Otherwise it looks good and the top message was for the Sparking unicornio creator

(Jun. 14, 2020  11:12 PM)snoc Wrote:

(Jun. 14, 2020  10:02 PM)Sunset Blader Wrote: I made a new Sparking bey as an evolution to Archer Hercules. I call it Snipershot Hercules. The credit of the name goes to MagikHorse and CitrusNinja. Keep in mind that you need to assemble this bey. Here it is: https://www.tinkercad.com/things/56ibEkEDqce-beyblade-burst-sparking-snipershot-hercules

---

I might have to finish some work on it

---

But I do have a single layer Salamander that I want to share:  https://www.tinkercad.com/things/657PamQbkjv-salamander-single-layer-beyblade

Im fairly new to the 3d bey community and modelers, but your work is great!

(Jun. 16, 2020  3:53 AM)xXxXSpyderXxXx Wrote:

(Jun. 16, 2020  12:38 AM)Sunset Blader Wrote: That looks AWESOME! Wish I could print it but sadly i can't. Only thing I have to say is that you should probably bring the base of the ring up a little. also The ring template you are using isn't compatible with the Chips. I found a working template right here: https://www.thingiverse.com/thing:4367432

---

Otherwise it looks good and the top message was for the Sparking unicornio creator

The ring template is in fact compatible with Sparking chips as seen in the third picture here

(Jun. 16, 2020  6:53 AM)Sunset Blader Wrote:

(Jun. 14, 2020  11:12 PM)snoc Wrote: Im fairly new to the 3d bey community and modelers, but your work is great!

(Jun. 16, 2020  3:53 AM)xXxXSpyderXxXx Wrote: The ring template is in fact compatible with Sparking chips as seen in the third picture here

Do you know the tabs on the sparking rings hat lock into the layer? The template you have blocks them out.

(Jun. 16, 2020  8:41 AM)xXxXSpyderXxXx Wrote:

(Jun. 16, 2020  6:53 AM)Sunset Blader Wrote: Do you know the tabs on the sparking rings hat lock into the layer? The template you have blocks them out.

Yes but the lock thing on the ring is fragile so for my template you just insert it and have the performance tip lock it in.

“Cube Update V2: Cube slots for slide in.

Note* I made it with a push in cube design as all the chips i tried using kept on breaking the prongs when i tried to push it into place...” -the creator of the template

(Jun. 21, 2020  12:33 AM)William Cochran Wrote: can someone help me make a gt xcalius beyblade on thingiverse?

(Jun. 21, 2020  1:32 AM)Sunset Blader Wrote:

(Jun. 21, 2020  12:33 AM)William Cochran Wrote: can someone help me make a gt xcalius beyblade on thingiverse?

I can try, could you dm me?

(Jun. 21, 2020  1:43 AM)William Cochran Wrote:

(Jun. 21, 2020  1:32 AM)Sunset Blader Wrote: I can try, could you dm me?

What does dm stand for?

(Jun. 21, 2020  1:44 AM)William Cochran Wrote: how do i direct message?

---

srry....i know.....im a pain in the ***

(Jun. 21, 2020  5:47 PM)Ali Baba Wrote: "I" made a 3D model for Cipher Dragon, I just use templates and a ring from Draco beyblade (king beymakers), I'll put the link here, please say if it's just Imperial dragon Sparking version. The combo is Cipher Dragon St. Ch. 4A. https://www.tinkercad.com/things/liW86dkyhAk-cipher-dragon-4a