World Beyblade Organization by Fighting Spirits Inc.
SIEG XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - Printable Version

+- World Beyblade Organization by Fighting Spirits Inc. (https://worldbeyblade.org)
+-- Forum: Other (https://worldbeyblade.org/Forum-Other)
+--- Forum: Closed Threads (https://worldbeyblade.org/Forum-Closed-Threads)
+--- Thread: SIEG XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge (/Thread-SIEG-XCALIBUR-1H-Vl-BUSTER-XCALIBUR-1-D-Sw-open-challenge)

Pages: 1 2 3


RE: SIEG/SURGE XCALIBUR .1H.Vl open challenge - RichieBoi - May. 17, 2018

(May. 17, 2018  8:23 PM)AURADRAGOON ZX Wrote:
(May. 16, 2018  4:03 AM)RichieBoi Wrote: cognite c3 (hasbro) 7cross atomic

I'LL GET TO THAT!

(May. 16, 2018  7:13 AM)IronFace879 Wrote: How about this combo.
God/Genesis Valkyrie/Valtryek V3 7 Variable (worn)
7 will help it become heavy enough to withstand seriously heavy Xcalibur hits while having no frame helps increase the likelihood of bound attack to resist bursting. Variable (worn) will make it travel across the stadium fast enough to break through Xcalibur’s powerful attack and potentially burst it. Just so you know, I only have the Hasbro version of each part.

I GET TO THAT, IS IT OK IF I USE THE TT PARTS?

(May. 16, 2018  4:03 AM)RichieBoi Wrote: cognite c3 (hasbro) 7cross atomic

ATTACK MODE OR STAMINA MODE?

(May. 16, 2018  9:13 AM)leosama Wrote: Winnin Valkyrie could easily replace the gV layer. It’s just so much heavier, you know? I picked it up for the first time and I was shook?

And you might wanna swap worn variable for Xtreme. Worn Variable is faster, but is so much harder to control. There’s really no point having all that speed of you knock yourself out of the stadium.

*talks in a posh ascent* so would that make WINNING VALKYRIE .7.X your combo sir

Stamina mode


RE: SIEG/SURGE XCALIBUR .1H.Vl open challenge - CitrusNinja3 - May. 18, 2018

(May. 10, 2018  4:38 PM)AURADRAGOON ZX Wrote: i'm hosting an open challenge for my ultimate combo: SIEG/SURGE XCALIBUR .1H.Vl

if you want to answer the challenge you going to have to post your combo in the place below so you don't actually have to show up

the beyblade combo that catches my interest will go up against my combo, in a video in this playlist  https://www.youtube.com/watch?v=OAfANSocGoc&list=PLYIHktmhtJFp7C3cCCrbVoWervRFDWmNG

if your combo doesn't get used it could one of these factors:
1: i don't notice it
2: the combo doesn't catch my interest
3: it's already has been used
4: i don't have one or any of the parts need to make it
5: the combo just isn't good (i'll test that by putting it up against BLAZE RAGNANUK .4C.Fl off camera)


so with that out of the way, start posting your main combo down below and check playlist every now and again to see if your combo makes to the one of the videos on it.

good luck! - AURADRAGOON ZX

Can you try Alter Chronos 7Vortex Destroy? I'm only missing the layer, and I want to know how good this combo is


RE: SIEG/SURGE XCALIBUR .1H.Vl open challenge - Bastillon - May. 18, 2018

Sieg Xcalibur has fairly high recoil, and Volcanic isn't exactly the best driver. I guess the rudimentary gK.H.O/R should be enough for it to self-burst or win by spin finish quite easily.


RE: SIEG/SURGE XCALIBUR .1H.Vl open challenge - AURADRAGOON ZX - May. 18, 2018

(May. 17, 2018  9:45 PM)MWF Wrote:
(May. 17, 2018  9:06 PM)AURADRAGOON ZX Wrote: it was a mistake, i thought that XTREME had more stamina then VOLCANIC, sorry about that it wasn't me being biased, it was my terrible judgment

One of the best ways to test stamina is to just launch it and see which has more stamina.

THANKS


RE: SIEG/SURGE XCALIBUR .1H.Vl open challenge - IronFace879 - May. 18, 2018

(May. 17, 2018  8:23 PM)AURADRAGOON ZX Wrote:
(May. 16, 2018  4:03 AM)RichieBoi Wrote: cognite c3 (hasbro) 7cross atomic

I'LL GET TO THAT!

(May. 16, 2018  7:13 AM)IronFace879 Wrote: How about this combo.
God/Genesis Valkyrie/Valtryek V3 7 Variable (worn)
7 will help it become heavy enough to withstand seriously heavy Xcalibur hits while having no frame helps increase the likelihood of bound attack to resist bursting. Variable (worn) will make it travel across the stadium fast enough to break through Xcalibur’s powerful attack and potentially burst it. Just so you know, I only have the Hasbro version of each part.

I GET TO THAT, IS IT OK IF I USE THE TT PARTS?

(May. 16, 2018  4:03 AM)RichieBoi Wrote: cognite c3 (hasbro) 7cross atomic

ATTACK MODE OR STAMINA MODE?

(May. 16, 2018  9:13 AM)leosama Wrote: Winnin Valkyrie could easily replace the gV layer. It’s just so much heavier, you know? I picked it up for the first time and I was shook?

And you might wanna swap worn variable for Xtreme. Worn Variable is faster, but is so much harder to control. There’s really no point having all that speed of you knock yourself out of the stadium.

*talks in a posh ascent* so would that make WINNING VALKYRIE .7.X your combo sir

Even if you could use TT layers, yes, you can use the Tomy counterpart of mine.


RE: SIEG/SURGE XCALIBUR .1H.Vl open challenge - ThePheonix - May. 18, 2018

(May. 18, 2018  8:47 AM)AURADRAGOON ZX Wrote:
(May. 17, 2018  9:45 PM)MWF Wrote: One of the best ways to test stamina is to just launch it and see which has more stamina.

THANKS
Don't create One-Word-Posts and instead just like his/her post.


RE: SIEG/SURGE XCALIBUR .1H.Vl open challenge - Lucifer's Spawn - May. 18, 2018

(May. 17, 2018  9:53 PM)Lucifer\s Spawn Wrote: Could you do gZ.4B.Pl?



RE: SIEG/SURGE XCALIBUR .1H.Vl open challenge - Bija - May. 18, 2018

how about Bloody Longinus 4 yard


RE: SIEG/SURGE XCALIBUR .1H.Vl open challenge - AURADRAGOON ZX - May. 18, 2018

(May. 18, 2018  10:11 PM)Bija Wrote: how about Bloody Longinus 4 yard

when i get eF.0.Yr i will

(May. 18, 2018  9:31 PM)Lucifer\s Spawn Wrote:
(May. 17, 2018  9:53 PM)Lucifer\s Spawn Wrote: Could you do gZ.4B.Pl?

just unboxed gZ.4M.Pl! when i get aB.2B.At i'll get to it


RE: SIEG/SURGE XCALIBUR .1H.Vl open challenge - Lucifer's Spawn - May. 19, 2018

ok, cool.


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - AURADRAGOON ZX - Sep. 05, 2018

(May. 10, 2018  4:38 PM)AURADRAGOON ZX Wrote: i'm hosting an open challenge for my ultimate combo: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw

if you want to answer the challenge you going to have to post your combo in the place below so you don't actually have to show up

the beyblade combo that catches my interest will go up against my combo, in a video in this playlist  https://www.youtube.com/watch?v=OAfANSocGoc&list=PLYIHktmhtJFp7C3cCCrbVoWervRFDWmNG

if your combo doesn't get used it could one of these factors:
1: i don't notice it
2: the combo doesn't catch my interest
3: it's already has been used
4: i don't have one or any of the parts need to make it

FACTOR:
god layers/switchstrike beys = SIEG/SURGE XCALIBUR .1H.Vl (METAL GOD CHIP VER.) (METAL GOD CHIP VER. combos allowed)
cho/super/z/zetsu layers/turbo beys = BUSTER XCALIBUR .1'D.Sw (LEVEL CHIP VER. unavailable) (LEVEL CHIP VER. combos unavailable)

UPDATE 1:
if you want to challenge SIEG/SURGE XCALIBUR .1H.Vl: use god layer/switchstrike beyblades,
cho-z/super z/chouzetsu/super zetsu/turbo beys will be pit up against: BUSTER XCALIBUR .1'D.Sw,
there will be a limit time (if i'm lucky that is) to be able to face bX.1'D.Sw without a level chip regardless if you want bX to have it or not (since i don't actually have a level chip),
but once the limited time runs out: BUSTER XCALIBUR .1'D.Sw with always have a level chip on it regardless,
you won't be allowed to use a level chip until a certain date (the date being when i decide/get a second level chip)
so to put it bluntly read the factor list

UPDATE 2:
if you being on this thread before: chances are you know the BLAZE RAGNANUK RULE (i.e: if your combo can't beat bR.4C.Fl it won't be selected)
but i have now decided, after some consideration, that i the BLAZE RAGNANUK rule is now retired,
i will still test combos off camera against bR, but it does'nt have to beat it anymore,
the reason why i have retired the rule is because not every good beyblade can be a counter to every beyblade,as the old metal fight beyblade type tutorial on the WBO youtube channel said: there's  no such thing as the perfect beyblade, and the way the some (if not all) beyblade parts are showcase cause this to be the truth,
ATOMIC is the best deference driver but the thing form keeping it perfect is it's week springs, BEARING would be the best stamina driver had it now being for the bad springs, ZETA could have being the best balance driver (or the best driver period) if the tips weren't those of once that were A: were good in the past until new parts outclassed them, or B: had been outclassed since there release, Q/M/F was not a good choice of parts, even making it A/M/F would have being better, it would be the best driver if it was say like: J/L/F, X/O/U, Hn/O/Mr or X/At/Br, but nope, even perfect layers like SPRIGGAN REQUIEM and MAXIMUM GARUDA can be beat, Sr can be sometimes burst-ed by sX.1H.Vl (i tested) and i have can think of 2 beyblades that can defeat it (BLAST JINIUS and GALAXY ZEUS), so with all that being said, even thou i will still use BLAZE RAGNANUK to test combos, the rule of combos having to beat it to be allowed to go up against sX.1H.Vl or heck even bx.1'D.Sw is retired

so with that out of the way, start posting your main combo down below and check playlist every now and again to see if your combo makes to the one of the videos on it.

good luck! - AURADRAGOON ZX



RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - CitrusNinja3 - Sep. 05, 2018

I bet Buster Xcalibur 1' (Backwards) Meteor Revolve can beat Sieg Xcalibur 1 Hit Volcanic


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - MWF - Sep. 05, 2018

hasbro Requiem S3.0M.Br


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - Basalt Fox - Sep. 06, 2018

Revive Phoenix 10 Cross Atomic


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - ThePheonix - Sep. 06, 2018

I don't know if anyone noticed this but isn't this not supposed to be in the Introduce Yourself Forum.


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - CitrusNinja3 - Sep. 06, 2018

(Sep. 06, 2018  8:59 AM)ThePheonix Wrote: I don't know if anyone noticed this but isn't this not supposed to be in the Introduce Yourself Forum.

Oof, you're right. I only found this through Latest Posts.


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - ThePheonix - Sep. 06, 2018

(Sep. 06, 2018  11:32 AM)CitrusNinja3 Wrote:
(Sep. 06, 2018  8:59 AM)ThePheonix Wrote: I don't know if anyone noticed this but isn't this not supposed to be in the Introduce Yourself Forum.

Oof, you're right. I only found this through Latest Posts.

Even I did but I like to read the Sub-Forum to get a slight insight.


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - CheetoBlader - Oct. 09, 2018

Garuda polish bearing


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - Dragunix - Oct. 09, 2018

hS.0B.At/Et/Br


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - MWF - Oct. 09, 2018

Hasbro F3.0C.Br


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - CheetoBlader - Oct. 12, 2018

Spriggan/Spryzen requiem 0 bump iron


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - CitrusNinja3 - Oct. 12, 2018

Buster Xcalibur 0 Meteor Revolve


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - DracoYggdrasil1 - Nov. 03, 2018

Is 1’ compatible with the Digital Sword Launcher?


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - CitrusNinja3 - Nov. 04, 2018

(Nov. 03, 2018  9:58 PM)DracoYggdrasil1 Wrote: Is 1’ compatible with the Digital Sword Launcher?
I don't know, but try asking in another thread that is actually relevant to the topic.


RE: SIEG/SURGE XCALIBUR .1H.Vl/BUSTER XCALIBUR .1'D.Sw open challenge - AURADRAGOON ZX - Nov. 17, 2018

(Nov. 03, 2018  9:58 PM)DracoYggdrasil1 Wrote: Is 1’ compatible with the Digital Sword Launcher?

it's compatible with the beylauncher so i see no reason as too it not working on the digital sword launcher

the streak so far is 5-0 (i think) for SIEG, as for BUSTER, i'll get to that some other time