(Dec. 03, 2011  5:03 AM)Byser Wrote: One more shot at a draft for tonight.

Quote:Angle Compass
The Angle Compass is an accessory intended to help Bladers straighten their launch. It is essentially a freely rotating ball inside a clear dome that attaches to the head of the Launcher Grip. On the rotating ball is a red dot that will always point upward regardless of how the Angle Compass is angled, due to the weight inside the ball on the opposite side. The idea is to use the red dot and the crosshair on the clear dome to determine the angle of the launch. When, from directly above, the red dot is centered with the crosshair, it means the Launcher Grip is directly parallel to the ground.

While helpful in theory, the Angle Compass can be fairly inconsistent. Because the ball rotates on the horizontal and vertical axes by two seperate rods, there are times when friction will prevent it from rotating as it should, and it then must be jostled to correct it.

The last part is based on my personal use from it. Considering we don't recommend people to buy it I don't think it's too inaccurate, but hey, who am I to judge?

(Dec. 03, 2011  3:35 PM)Imperial Wrote:

Quote:

3 Segment Launcher Grip.
The 3 Segment Launcher Grip is the the second version of the MFB Launcher Grip. The overal design of the Grip is slightly different, and the slot for the BB-16 Beypointer was replaced with a rectangular, moveable slot that holds the BeyPoint Card. The removal of the BeyPointer slot allowed the Grip to accommodate left-handed Bladers, and added the ability to hold two accessories, so that the grip is more customizable . It is important to note that Hasbro's Light Launchers do not fit in the 3 Segment Launcher Grip.

(Dec. 03, 2011  4:14 PM)Janstarblast Wrote: Hm, IFritDulux's draft would need more edits IMO.
As for the Light Launcher 2 article, it is good.
I'll try my hand at it! My first 'serious' BeyWiki article attempt!

Quote:Light Launcher 2

The Light Launcher 2 is the successor of the standard MFB launcher, the Light Launcher. The Winder of this launcher is a reinforced version, and is designed to be inserted vertically into the Launcher, unlike the standard Light Launcher Winder which is inserted horizontally. The handle provides better grip and the teeth are closer together. The LL2 Winder is incompatible with the standard Light Launcher.

A textured area and indented finger grips are incorporated into the Launcher for a more comfortable grip. The Light Launcher 2 offers a more powerful launch than a standard Light Launcher, but is still overshadowed by the BeyLauncher and its variants because of the recoil the Launcher has. A major flaw in this Launcher is that it gets rougher after usage, resulting in frequent and unwanted weak launches at times.

The Left Spin counterpart of the Light Launcher 2 was released with L Drago Destroy and has the same features as the original.

Please let me know whether you all liked it or not! I have made it a point to capitalize the first letters in 'Launchers', 'Winders', etc. as they are copyrighted terms introduced by TT.

(Dec. 03, 2011  10:53 PM)Imperial Wrote: "It is important to note that Hasbro's Light Launchers do not fit in the 3 Segment Launcher Grip."

Where did you hear this? I own the 3 Segment Launcher and Hasbro Ripcord launchers and they are compatible.

(Dec. 03, 2011  10:55 PM)Shabalabadoo Wrote: I've tried it. And I just tried it again right now. The clip doesn't clip on.

(Dec. 03, 2011  11:00 PM)Shabalabadoo Wrote: Yeah mine is separate. It's the gray one. Do you mind posting a picture?

(Dec. 04, 2011  12:03 AM)Ultrablader Wrote: @ Imperial: Um there are quite a few recolours from sets which is why I said I didn't know them.

(Dec. 03, 2011  11:13 PM)Shabalabadoo Wrote: ...
I believe there's also a WBBA Green Grip or something like that? ...

(Dec. 03, 2011  3:00 AM)Shabalabadoo Wrote: Looking at those two in specific, they should definitely be cut and moved here. Although the Beylauncher Suspension section should be shortened. We want the actual Light/BeyLauncher articles to be about the Light-BeyLauncher, so having them here is the best place. That's the intention of these; add more organisation to the launching products.

BeyLauncher Suspension Wrote:As a solution to the handle breakage issue in the BeyLauncher design, Takara-Tomy released an accessory called the BeyLauncher Suspension. This device attaches to the pre-existing handle of the BeyLauncher and contains a spring inside of it, as well as a re-designed ergonomic handle. This spring allowed the user to pull the launcher at full strength without releasing the handle since it would alleviate the stress from the internal launcher mechanism.

To gain maximum power with the BeyLauncher Suspension, grip the handle naturally (not too firm, but firm enough to not accidentally let go). Then pull the cord back very quickly until it runs out and you feel the tension of the spring expanding. At that point just stop, but do not let go. Accidentally letting the cord go with the Suspension attached results in a weaker shot.

For users with prior experience with the BeyLauncher this is a technique that will require some adjustment. There will be an initial inhibition to pull too hard for fear of breaking the internal mechanisms or string, but current usage has shown no issues with internal launcher damage, so pulling hard is not an issue. Also, some users have found that it is advantageous to switch their normally used launcher positions with the grip with the addition of the Suspension for greater performance/comfort.

(Dec. 03, 2011  3:52 AM)Imperial Wrote: Light Launcher 2

The Light Launcher 2, abbreviated as LL2, is quite different from the standard MFB launcher, the Light Launcher. Like the Neo-Dragon Winder from the Plastic Generation, the Winder is inserted vertically, but is not compatible with the Light Launcher. It has thicker teeth and is more durable than the original Light Launcher Winder. The Light Launcher 2 is preferred over the Light Launcher for its more powerful launch, but it is still overshadowed by the BeyLauncher and does sometimes have a tendency to scrape up against the internal gears when pulled too powerfully.

The Light Launcher 2 was first released as a stand alone product in BB-87, and is now included with nearly every new release. The Left Spin counterpart of the Light Launcher 2 was released with L Drago Destroy F:S and has the same features as the original.

LED Sight Wrote:The LED Sight attaches to the Launcher Grip and features a battery-powered scope that emits a red LED light onto the stadium. The light is supposed to project where your Beyblade will land when shot. The angle of the LED Sight can be modifiable, which is useful depending on your strategy and where it is attached to the Launcher Grip.

In theory, the idea of having the ability to predict where your Beyblade will land is great, but in reality the LED Sight is relatively useless because it isn't terribly accurate. There are numerous factors that can affect the shooting of your Beyblade, such as: launching angle, launching movement, and the position of your opponent prior to the beginning of the battle; all of which throw the accuracy of the LED Sight off. And even if you were to keep your hands still when using the LED Sight, it then gives the opponent an idea of where you are aiming in the stadium, which puts you at a disadvantage.

The LED Sight comes packaged with an exclusive Bottom: PD (Polish Defense). See the Metal Fight Beyblade - Bottom List article for more information.

Quote:The 3 Segment Launcher Grip is the Metal Fight Beyblade Explosion version of the original MFB Launcher Grip. At the time of this release, BeyPointers were not used anymore and served no purpose on a Launcher Grip. The BeyPoint Cards replaced the BeyPointer, and the 3 Segment Launcher Grip was designed to accommodate these cards. The BeyPoint Cards are inserted in a card slot that is located on the top of the head of the grip. This slot can be moved into multiple positions by rotating or sliding the card holder. The removal of the BeyPointer attachment allowed the grip to accommodate left-handed Bladers by adding a third place for the handle to attach to the head. The third attachment also allows two accessories to be attached at one time, providing more customizability. The handle did not go through major changes, except for the fact that the Tool at the Bottom was smaller and "3 Segment" was written on the new textured design. It is important to note that Hasbro's Light Launchers do not fit in the 3 Segment Grip, and that the handles and heads of the 3 Segment Grip and the original Grip are not interchangeable.

(Dec. 17, 2011  10:52 PM)Shabalabadoo Wrote: I've decided to restart the 3 Segment section, it's too ugly when things get chopped out and stuffed in continuously.

Quote:The 3 Segment Launcher Grip is the Metal Fight Beyblade Explosion version of the original MFB Launcher Grip. At the time of this release, BeyPointers were not used anymore and served no purpose on a Launcher Grip. The BeyPoint Cards replaced the BeyPointer, and the 3 Segment Launcher Grip was designed to accommodate these cards. The BeyPoint Cards are inserted in a card slot that is located on the top of the head of the grip. This slot can be moved into multiple positions by rotating or sliding the card holder. The removal of the BeyPointer attachment allowed the grip to accommodate left-handed Bladers by adding a third place for the handle to attach to the head. The third attachment also allows two accessories to be attached at one time, providing more customizability. The handle did not go through major changes, except for the fact that the Tool at the Bottom was smaller and "3 Segment" was written on the new textured design. It is important to note that Hasbro's Light Launchers do not fit in the 3 Segment Grip, and that the handles and heads of the 3 Segment Grip and the original Grip are not interchangeable.

That good? If it is, I believe all the sections for the Grips & Accessories are finished!

(Dec. 17, 2011  10:52 PM)Shabalabadoo Wrote:

Quote:The 3 Segment Launcher Grip is the Metal Fight Beyblade Explosion version of the original MFB Launcher Grip. At the time of this release, BeyPointers were not used anymore and served no purpose on a Launcher Grip. The BeyPoint Cards replaced the BeyPointer, and the 3 Segment Launcher Grip was designed to accommodate these cards. The BeyPoint Cards are inserted in a card slot that is located on the top of the head of the grip. This slot can be moved into multiple positions by rotating or sliding the card holder. The removal of the BeyPointer attachment allowed the grip to accommodate left-handed Bladers by adding a third place for the handle to attach to the head. The third attachment also allows two accessories to be attached at one time, providing more customizability. The handle did not go through major changes, except for the fact that the Tool at the Bottom was smaller and "3 Segment" was written on the new textured design. It is important to note that Hasbro's Ligh Launchers do not fit in the 3 Segment Grip, and that the handles and heads of the 3 Segment Grip and the original Grip are not interchangeable.