RE: Face Contest: Design a Beyblade, Space-Style! - Cyber Kerberous - Aug. 26, 2011
(Aug. 26, 2011 6:30 PM)Sayak Blader Wrote: I dont have a scaner.can i post a photo?
This was said at the beginning--- Yes!!! 
RE: Face Contest: Design a Beyblade, Space-Style! - Ultimatefry - Aug. 26, 2011
(Aug. 26, 2011 12:46 AM)Kai-V Wrote: (Aug. 25, 2011 10:27 PM)Ultimatefry Wrote: I has a question! My blade was going to "already be released" and have an explanation of other "releases" from others. And yes, I came up with the Beywiki article idea before reading a few of these ideas.
What is your question ...
I has a question! My blade was going to "already be released" and have an explanation of other "releases" from others. And yes, I came up with the Beywiki article idea before reading a few of these ideas.
What I was asking was, could I have an explanation of the part on the "other release"?
RE: Face Contest: Design a Beyblade, Space-Style! - Kai-V - Aug. 27, 2011
(Aug. 26, 2011 10:41 PM)Ultimatefry Wrote: I has a question! My blade was going to "already be released" and have an explanation of other "releases" from others. And yes, I came up with the Beywiki article idea before reading a few of these ideas.
What I was asking was, could I have an explanation of the part on the "other release"?
If you want, yes. Would those other parts be new as well though ? Because usually re-releases include old parts, so you would have to remain traditional. Of course you are only supposed to imagine and post one new of each part, so if you use the Metal System from Metal Fight Beyblade, only one new Clear Wheel, only one new Metal Wheel, only one new Track, and only one new Bottom. You can also not even come up with one part that is new, for instance, since TAKARA-TOMY does it a lot anyway, your Beyblade could have WD as a Bottom if you want.
RE: Face Contest: Design a Beyblade, Space-Style! - Ultimatefry - Aug. 27, 2011
(Aug. 27, 2011 3:09 AM)Kai-V Wrote: (Aug. 26, 2011 10:41 PM)Ultimatefry Wrote: I has a question! My blade was going to "already be released" and have an explanation of other "releases" from others. And yes, I came up with the Beywiki article idea before reading a few of these ideas.
What I was asking was, could I have an explanation of the part on the "other release"?
If you want, yes. Would those other parts be new as well though ? Because usually re-releases include old parts, so you would have to remain traditional. Of course you are only supposed to imagine and post one new of each part, so if you use the Metal System from Metal Fight Beyblade, only one new Clear Wheel, only one new Metal Wheel, only one new Track, and only one new Bottom. You can also not even come up with one part that is new, for instance, since TAKARA-TOMY does it a lot anyway, your Beyblade could have WD as a Bottom if you want.
Yeah, it was originally going to have WD, then that started an idea, then I thought about RF and had a new idea, pretty awesome actually, soooooo, yeah. I would remain traditional and replaced my invented parts with an ED145 or something...
RE: Face Contest: Design a Beyblade, Space-Style! - SCARlet - Aug. 27, 2011
Is it possible to upload a Word document as your entry?
RE: Face Contest: Design a Beyblade, Space-Style! - Kai-V - Aug. 27, 2011
(Aug. 27, 2011 4:47 PM)CycloneAeolus Wrote: Is it possible to upload a Word document as your entry?
You could just take the extra time to upload your picture(s) on ImageShack.us and copy and paste your text here in a post ...
RE: Face Contest: Design a Beyblade, Space-Style! - Benjohadi - Aug. 27, 2011
Here is my hand out for the beyblade design contest…
Firstly, I’m going to introduce you guys a bit about what my creation is about. Well, I designed a beyblade based on space theme, based on the upcoming series of the latest series of kamen rider, that is Kamen Rider Fourze.
[Image: kamenriderfourze.jpg]
[Image: fourzeposter.png]
Kamen Rider Fourze (ä»®é¢ãƒ©ã‚¤ãƒ€ãƒ¼ãƒ•ã‚©ãƒ¼ã‚¼ Kamen RaidÄ FÅze?) is the primary and eponymous protagonist of the 2011-2012 Kamen Rider Series Kamen Rider Fourze. Kamen Rider Fourze's name is meant to resemble the number 40, as Fourze serves as a 40th anniversary for the Kamen Rider Series and there are 40 different powers he can access. The series also commemorates the 50th anniversary of manned spaceflight, lending itself to Fourze's spacecraft-inspired design and arsenal.
Sourced from wikipedia.
This beyblade is designed for pure attack using a special 4D bottom and 4D wheel, best designed to fit in it purposes. Beyblade Fourze AKA Rocket Astro E : D is a left spinning beyblade.
Face : Fourze
[Image: asdeq.png]
The face symbolize Kamen Rider Fourze, the Earth’s hero for protecing the Earth from the Zodiart menace.
[Image: clearwheeledited.jpg]
Astro, is a circular plastic wheel in pearly white color (not translucent) to resemble the mighty Kamen Rider Fourze. Symbols of Astro switch, which is inserted by Fourze to histhe Fourze Driver belt to transform(henshin), that are ‘ circle’, ‘rectangle’, ‘x’ and ‘triangle’. Meanwhile, the 4 red torch-like resemble the light of protector of the Earth.
This metal wheel despite the ‘circle astro switch’ of Fourze, that is one of Fourze’s greatest weopon in action, a Rocket that is atached to his right hand, and a Drill that is the ‘triangle astro switch ‘ of Fourze which is also a weapon.
With this metal wheel, Fourzey can be switch into two mode, that is Upper Rocket mode and Blunt Drill mode by simply push in the drill into the center of the metal wheel or pull out the drill from the metal wheel.
Upper Rocket mode
[Image: metalwheelplusclearwhee.jpg]
Upper Rocket is designed while the drill is pushed, and fully inside the metal wheel. Thus, Upper Rocket mode is a fully metal MW. It is also designed with upper slope to provide a massive upper attack. The upper slope is used to tilt while exerting forces to the opposing beyblade it flying and knock out of the stadium. This Upper Slope mode of the metal wheel will not give any chance to any defence beyblades either with high track or low track.
Blunt Drill mode
[Image: metalwheelandclearwheel.jpg]
This metal wheel is combined with the ‘triangle astro switch’, that is a Drill that is attached on Fourze’s left leg while fighting. It is first designed to be sharp. But due to the sharp claw, it is fragile and easily broken because of the vast fast spin of the bey. The blunt drill of this metal wheel is made of rubber. Like L Drago Destroy, the rubber is made for spin stealing purpose but work better as the drill is pop out from the metal wheel so that more contact is made when Fourze hit other beyblades. Thus, provide a great spin steal. Moreover, the pop out drill will also provide smash attack.
4D Bottom : E : D ( Engine Drive)
[Image: 4dbottomupperviewedited.jpg]
E : D is designed based on the engine of a rocket for OHKO(one knock out) purpose. Similarly, like the G-Revolution plastics, E : D ( Engine Drive) = Engine gear and will release extra large spin to the tip of the bottom. E : D is equipped with a double clutch system where it can be change into dual mode, that are First Clutch and Final Clutch. The mode can be change by rotating the switch (blue outer casing) by 90 degree.
Using first clutch system, the E : D‘s engine will kick in immediately after impact on stadium after being launched. As for that, Beyblade Fourze will run circling the stadium like hell. Even a hit is enough to knock out the opposing beyblade.
By using final clutch system, E : D’s engine will not kick inimmediately after launched. However, the engine will be released after few impact by the other beyblades where the impact release the spring that trigger the engine bit by bit and finally…ZAAASSS!!! The engine kicks in and give extra spin to Beyblade Fourze while letting the bey to run circling the stadium. This final clutch is mainly used to give final direct hit to the opposing bey or to escape from the hit from the opposing bey.
The tip of E : D is a cone semi flat rubber. Rubber is choosen to give friction between the bey and the stadium. This will fit in the purpose for E : D, that is OHKO (one hit knock out)
[Image: abucp.jpg]
RE: Face Contest: Design a Beyblade, Space-Style! - KCPJ - Aug. 27, 2011
Now,that,is a winner,dude.You made the awesomest bey so far,also,love the Playstation buttons 
RE: Face Contest: Design a Beyblade, Space-Style! - Galaxy_Storm_ - Aug. 27, 2011
You guys have inspired me to make entry mine will be done by tomorrow or monday. It's gonna be great.
RE: Face Contest: Design a Beyblade, Space-Style! - Kenta Yuki - Aug. 28, 2011
I am very surprised to be honest the latest entry is the best!
That is awesome Benjohadi!
But I still haven't entered yet so it's not over!
But I do think yours would win over me anyday!
-Kenta Yuki
RE: Face Contest: Design a Beyblade, Space-Style! - DynaZord - Aug. 28, 2011
(Aug. 27, 2011 8:27 PM)Benjohadi Wrote: Entry You just destroyed my Astro bey.
Nice job, Benjohadi, I think you just won yourself a Strongest Blader Set
RE: Face Contest: Design a Beyblade, Space-Style! - Galaxy_Storm_ - Aug. 28, 2011
(Aug. 28, 2011 3:20 AM)Kenta Yuki Wrote: I am very surprised to be honest the latest entry is the best!
That is awesome Benjohadi!
But I still haven't entered yet so it's not over!
But I do think yours would win over me anyday!
-Kenta Yuki
you could beat me
RE: Face Contest: Design a Beyblade, Space-Style! - Kai_hiwitari - Aug. 28, 2011
(Aug. 27, 2011 8:27 PM)Benjohadi Wrote: Here is my hand out for the beyblade design contest…
Firstly, I’m going to introduce you guys a bit about what my creation is about. Well, I designed a beyblade based on space theme, based on the upcoming series of the latest series of kamen rider, that is Kamen Rider Fourze.
[Image: kamenriderfourze.jpg]
[Image: fourzeposter.png]
Kamen Rider Fourze (ä»®é¢ãƒ©ã‚¤ãƒ€ãƒ¼ãƒ•ã‚©ãƒ¼ã‚¼ Kamen RaidÄ FÅze?) is the primary and eponymous protagonist of the 2011-2012 Kamen Rider Series Kamen Rider Fourze. Kamen Rider Fourze's name is meant to resemble the number 40, as Fourze serves as a 40th anniversary for the Kamen Rider Series and there are 40 different powers he can access. The series also commemorates the 50th anniversary of manned spaceflight, lending itself to Fourze's spacecraft-inspired design and arsenal.
Sourced from wikipedia.
This beyblade is designed for pure attack using a special 4D bottom and 4D wheel, best designed to fit in it purposes. Beyblade Fourze AKA Rocket Astro E : D is a left spinning beyblade.
Face : Fourze
[Image: asdeq.png]
The face symbolize Kamen Rider Fourze, the Earth’s hero for protecing the Earth from the Zodiart menace.
[Image: clearwheeledited.jpg]
Astro, is a circular plastic wheel in pearly white color (not translucent) to resemble the mighty Kamen Rider Fourze. Symbols of Astro switch, which is inserted by Fourze to histhe Fourze Driver belt to transform(henshin), that are ‘ circle’, ‘rectangle’, ‘x’ and ‘triangle’. Meanwhile, the 4 red torch-like resemble the light of protector of the Earth.
This metal wheel despite the ‘circle astro switch’ of Fourze, that is one of Fourze’s greatest weopon in action, a Rocket that is atached to his right hand, and a Drill that is the ‘triangle astro switch ‘ of Fourze which is also a weapon.
With this metal wheel, Fourzey can be switch into two mode, that is Upper Rocket mode and Blunt Drill mode by simply push in the drill into the center of the metal wheel or pull out the drill from the metal wheel.
Upper Rocket mode
[Image: metalwheelplusclearwhee.jpg]
Upper Rocket is designed while the drill is pushed, and fully inside the metal wheel. Thus, Upper Rocket mode is a fully metal MW. It is also designed with upper slope to provide a massive upper attack. The upper slope is used to tilt while exerting forces to the opposing beyblade it flying and knock out of the stadium. This Upper Slope mode of the metal wheel will not give any chance to any defence beyblades either with high track or low track.
Blunt Drill mode
[Image: metalwheelandclearwheel.jpg]
This metal wheel is combined with the ‘triangle astro switch’, that is a Drill that is attached on Fourze’s left leg while fighting. It is first designed to be sharp. But due to the sharp claw, it is fragile and easily broken because of the vast fast spin of the bey. The blunt drill of this metal wheel is made of rubber. Like L Drago Destroy, the rubber is made for spin stealing purpose but work better as the drill is pop out from the metal wheel so that more contact is made when Fourze hit other beyblades. Thus, provide a great spin steal. Moreover, the pop out drill will also provide smash attack.
4D Bottom : E : D ( Engine Drive)
[Image: 4dbottomupperviewedited.jpg]
E : D is designed based on the engine of a rocket for OHKO(one knock out) purpose. Similarly, like the G-Revolution plastics, E : D ( Engine Drive) = Engine gear and will release extra large spin to the tip of the bottom. E : D is equipped with a double clutch system where it can be change into dual mode, that are First Clutch and Final Clutch. The mode can be change by rotating the switch (blue outer casing) by 90 degree.
Using first clutch system, the E : D‘s engine will kick in immediately after impact on stadium after being launched. As for that, Beyblade Fourze will run circling the stadium like hell. Even a hit is enough to knock out the opposing beyblade.
By using final clutch system, E : D’s engine will not kick inimmediately after launched. However, the engine will be released after few impact by the other beyblades where the impact release the spring that trigger the engine bit by bit and finally…ZAAASSS!!! The engine kicks in and give extra spin to Beyblade Fourze while letting the bey to run circling the stadium. This final clutch is mainly used to give final direct hit to the opposing bey or to escape from the hit from the opposing bey.
The tip of E : D is a cone semi flat rubber. Rubber is choosen to give friction between the bey and the stadium. This will fit in the purpose for E : D, that is OHKO (one hit knock out)
This depresses me. T_T Thought i had a chance before this entry. Good job man.
RE: Face Contest: Design a Beyblade, Space-Style! - BeybladerPotter - Aug. 28, 2011
(Aug. 27, 2011 8:27 PM)Benjohadi Wrote: Entry This kills mine a lot. Eh. I still have a chance.
RE: Face Contest: Design a Beyblade, Space-Style! - Benjohadi - Aug. 28, 2011
thanks guys..haha..got me a lot of time to design it..i hope it is worth it...but there is still lots of time left..people like deikalo havent post yet..XD..just hope that i dont post it too early..haha..
thanks for liking it..anyway,the rest are doing good job too..
RE: Face Contest: Design a Beyblade, Space-Style! - Janstarblast - Aug. 28, 2011
(Aug. 27, 2011 8:27 PM)Benjohadi Wrote: Entry
BANG!
Man, you devastated every entry posted so far! You are such an artist! I LOVED the idea of Engine Drive.
Seriously, your entry KILLED everyone else's. My entry won't be even 1% as good as yours. Its just my idea that is quite good, but that too, is just my opinion.
You stole the show, Benjo! 
RE: Face Contest: Design a Beyblade, Space-Style! - TenshouTsubasa - Aug. 28, 2011
(Aug. 27, 2011 8:27 PM)Benjohadi Wrote: *images*
Now that is art.
This is the best one I ever seen in this battle.
RE: Face Contest: Design a Beyblade, Space-Style! - Prince Blaze - Aug. 28, 2011
(Aug. 27, 2011 8:27 PM)Benjohadi Wrote: Here is my hand out for the beyblade design contest…
Firstly, I’m going to introduce you guys a bit about what my creation is about. Well, I designed a beyblade based on space theme, based on the upcoming series of the latest series of kamen rider, that is Kamen Rider Fourze.
[Image: kamenriderfourze.jpg]
[Image: fourzeposter.png]
Kamen Rider Fourze (ä»®é¢ãƒ©ã‚¤ãƒ€ãƒ¼ãƒ•ã‚©ãƒ¼ã‚¼ Kamen RaidÄ FÅze?) is the primary and eponymous protagonist of the 2011-2012 Kamen Rider Series Kamen Rider Fourze. Kamen Rider Fourze's name is meant to resemble the number 40, as Fourze serves as a 40th anniversary for the Kamen Rider Series and there are 40 different powers he can access. The series also commemorates the 50th anniversary of manned spaceflight, lending itself to Fourze's spacecraft-inspired design and arsenal.
Sourced from wikipedia.
This beyblade is designed for pure attack using a special 4D bottom and 4D wheel, best designed to fit in it purposes. Beyblade Fourze AKA Rocket Astro E : D is a left spinning beyblade.
Face : Fourze
[Image: asdeq.png]
The face symbolize Kamen Rider Fourze, the Earth’s hero for protecing the Earth from the Zodiart menace.
[Image: clearwheeledited.jpg]
Astro, is a circular plastic wheel in pearly white color (not translucent) to resemble the mighty Kamen Rider Fourze. Symbols of Astro switch, which is inserted by Fourze to histhe Fourze Driver belt to transform(henshin), that are ‘ circle’, ‘rectangle’, ‘x’ and ‘triangle’. Meanwhile, the 4 red torch-like resemble the light of protector of the Earth.
This metal wheel despite the ‘circle astro switch’ of Fourze, that is one of Fourze’s greatest weopon in action, a Rocket that is atached to his right hand, and a Drill that is the ‘triangle astro switch ‘ of Fourze which is also a weapon.
With this metal wheel, Fourzey can be switch into two mode, that is Upper Rocket mode and Blunt Drill mode by simply push in the drill into the center of the metal wheel or pull out the drill from the metal wheel.
Upper Rocket mode
[Image: metalwheelplusclearwhee.jpg]
Upper Rocket is designed while the drill is pushed, and fully inside the metal wheel. Thus, Upper Rocket mode is a fully metal MW. It is also designed with upper slope to provide a massive upper attack. The upper slope is used to tilt while exerting forces to the opposing beyblade it flying and knock out of the stadium. This Upper Slope mode of the metal wheel will not give any chance to any defence beyblades either with high track or low track.
Blunt Drill mode
[Image: metalwheelandclearwheel.jpg]
This metal wheel is combined with the ‘triangle astro switch’, that is a Drill that is attached on Fourze’s left leg while fighting. It is first designed to be sharp. But due to the sharp claw, it is fragile and easily broken because of the vast fast spin of the bey. The blunt drill of this metal wheel is made of rubber. Like L Drago Destroy, the rubber is made for spin stealing purpose but work better as the drill is pop out from the metal wheel so that more contact is made when Fourze hit other beyblades. Thus, provide a great spin steal. Moreover, the pop out drill will also provide smash attack.
4D Bottom : E : D ( Engine Drive)
[Image: 4dbottomupperviewedited.jpg]
E : D is designed based on the engine of a rocket for OHKO(one knock out) purpose. Similarly, like the G-Revolution plastics, E : D ( Engine Drive) = Engine gear and will release extra large spin to the tip of the bottom. E : D is equipped with a double clutch system where it can be change into dual mode, that are First Clutch and Final Clutch. The mode can be change by rotating the switch (blue outer casing) by 90 degree.
Using first clutch system, the E : D‘s engine will kick in immediately after impact on stadium after being launched. As for that, Beyblade Fourze will run circling the stadium like hell. Even a hit is enough to knock out the opposing beyblade.
By using final clutch system, E : D’s engine will not kick inimmediately after launched. However, the engine will be released after few impact by the other beyblades where the impact release the spring that trigger the engine bit by bit and finally…ZAAASSS!!! The engine kicks in and give extra spin to Beyblade Fourze while letting the bey to run circling the stadium. This final clutch is mainly used to give final direct hit to the opposing bey or to escape from the hit from the opposing bey.
The tip of E : D is a cone semi flat rubber. Rubber is choosen to give friction between the bey and the stadium. This will fit in the purpose for E : D, that is OHKO (one hit knock out)
[Image: abucp.jpg]
I put he qoute in a spoiler because of it's size
RE: Face Contest: Design a Beyblade, Space-Style! - Mr. N - Aug. 28, 2011
That is a very good design, Benjohadi. It's very well thought out, especially the mode change on Rocket. I don't know anything about engine gears so I can't say anything about the 4D Bottom.
I'm still working on the bottom view of my CW. (so behind)
RE: Face Contest: Design a Beyblade, Space-Style! - H8R - Aug. 28, 2011
benjohadi you just got a strongest blader set! but then a gain there are still 2 more
RE: Face Contest: Design a Beyblade, Space-Style! - BeybladeStation - Aug. 28, 2011
Just wanna point something out, what if people do better than him?
It's definetely a great one, but you guys are acting this is over, when in the past, some are quite as more compelling. How do we not know this could happen any other time?
RE: Face Contest: Design a Beyblade, Space-Style! - NoodooSoup - Aug. 28, 2011
People are quick to assume.
RE: Face Contest: Design a Beyblade, Space-Style! - Iakou - Aug. 29, 2011
Here are my designs for the contest.
Here they are
Now for the parts, beywiki style
Facebolt- The image of fox is imprinted on the facebolt. Fox depicts vulpecula, one of the 88 constellations. The image is black, the bolt white.
Energy ring- The energy ring fox represents fox and it's tail. It is light at only 2 grams, and so helps with stamina.
Fusion wheel- The fusion wheel comet is 50 millimetres wide, and 37 grams. Its odd design with ten out lying blades is made to knock away beys, though with fox's design it usually back fires and knocks fox away and tilting. Each blade is 15 millimetres, and the center is 20. Comet is painted with white paint that shines that reflects all lights of the spectrum.
Use in defence customization- This bey can be used well for defence customization, because it can knock away opposing beys if it is weighted down enough, like in the combination mf-h comet leone 135 ms. It can be used to easily survive attack beys.
Spin track- Metal claws is an upgrade to the normal claws found on Sagittario. Only the claws themselves are metal. They can be useful in adding extra spin to the bey much like gravity balls, but unfourtanently, like claws, it is prone to ground scrapes. With claws fully extended, they are equal to the length of the fusion wheel.
Tip- Eternal metal ball is a useful part to have. Eternal metal ball is a free spinning ball, because of the plastic balls that are embedded in the side of the tip that hold the metal ball in place while allowing the metal ball to spin freely. The tip can be used to allow beys to move with the strikes of opposing beys, thus it is very useful in stamina combinations.
Use in stamina combinations- The tip can be very useful in combinations such as mf basalt kerbecs bd 145 emb, where the tip allows basalt to get away from left spin beys that would otherwise steal its spin.
Overall, the bey has several good pieces, and would be a good addition to any collection.
RE: Face Contest: Design a Beyblade, Space-Style! - Benjohadi - Aug. 29, 2011
thanks once again guys..bt as beybladesation said..there are lots of time left...i dont think i can win either..(Deikailo, Minion, and previous winners of the design contest havent yet posting)i am just hoping to win..haha..besides this is not only drawing contest..even contestant with good theory might be able win..
let the time decide..
besides...i just use pencil color..people who can use softwares and water color definitely are better..
RE: Face Contest: Design a Beyblade, Space-Style! - Janstarblast - Aug. 29, 2011
(Aug. 29, 2011 4:52 AM)Benjohadi Wrote: besides...i just use pencil color..people who can use softwares and water color definitely are better..
Ah, you don't need to worry about that. A person who's drawn out the design will be given more consideration compared to people who just put things together and make a design using a software.
|
